r/Fixxit • • 21h ago

85 Harley Davidson electraglide

Post image
3 Upvotes

I recently inherited my grandfathers 85 Electra glide. We couldn’t find the key and the ignition is locked any ideas on how to get it where I can replace the ignition. I don’t want to go through Harley to have a key made because I’m not sure if it’s the original ignition and I can’t find a locksmith in my area that does motorcycle keys.


r/Fixxit • • 3h ago

2004 Harley Davidson Electra Glide CVO SE 103 vibration.

Thumbnail
1 Upvotes

r/Fixxit • • 3h ago

Suzuki Access 125 (2014 BS3) starts but stalls immediately when accelerator is applied – Need diagnosis and mechanic recommendations in Chennai

Thumbnail
1 Upvotes

r/Fixxit • • 3h ago

My bike stopped working and clicks when I try to turn it on

Thumbnail
1 Upvotes

r/Fixxit • • 7h ago

Shadow 1100 possible diaphragm issue?

Thumbnail
1 Upvotes

r/Fixxit • • 9h ago

Yamaha XV250 Electric question

1 Upvotes

I recently bought a disassembled 1995 Yamaha XV250. Previous Owner took it apart due to a fault in the electrics (exact failure unknown). Last week i managed to start the engine (with a simplified mechanical and electric setup), so the next step is to fix the electrical issues. Since the whole electric harness looks terrible (iso-taped here, some strange fixes there, melted isolation, etc) I wanted to rebuild the entire thing, which led me to study the electric schematics... (Hope i'm allowed to post a snap of the schematics here...)

There i stumbled upon the wiring of the main light-switch (36):

  1. Is my analyzation correct: By turning the Lights from OFF to PO or ON I will short the wires "R/Y" and "L", which both should have a potential of 12V coming directly from the ignition switch (3) so no biggy. However, shorting them will bypass the SIGNAL-Fuse (33)...?

  2. If my analyzation is correct: Why in the world would you wire it up like this? Usually you ride with the lights on, so the fuse will be bypassed the entire time, making the whole thing useless.

I mean, sure i could wire it up like this and it will work, however it just seems strange to me and i'd like to figure out whats the reasoning behind this. Also i'm playing with the thought of properly separating all the circuits (ParkingOnly Signals, other Signals and the driving related electronics) and protecting each one of these circuits with a separate fuse... so understanding the whole thing would be key ^^

Thanks in advance :)


r/Fixxit • • 20h ago

2008 ktm 300xcw clutch help

1 Upvotes

r/Fixxit • • 21h ago

Majesty 400 Yamaha

1 Upvotes

Hi all. Newbie 2007 Yamaha Majesty 400 owner here. I bought a used Majesty with overheating problems and was riding it to my friends shop to try and fix it when it overheated and died( I was crossing g a long bridge with no spot to stop) It got so hot, it melted the oil dipstick. I know i have to go through the whole cooling system. My question is, what would I need to replace/repair to get it running again. Is it a given that the head gasket is blown and the cylinder would need reboring? New piston and rings, or might it have survived having to replace everything? I have some experience working on single cylinder motorcycles and am willing to learn. Please could anyone let me know how complicated this would be, and would a novice be able to manage it? Any advice would be appreciated. Thank you in advance. Sean.


r/Fixxit • • 17h ago

Falla encendido zx4rr 2024, las bujías ya se cambiaron y su filtro de aire, sensor de co2 está bien, que podría ser?...Ayuda😭

0 Upvotes