r/FordExplorer • • Jan 23 '26

Mod Post New rules, please read.

22 Upvotes

Hello Explorer owners and fans! We are now in week 2 of our new moderation team. Below are the new subreddit rules we've developed. These have been posted on the sidebar for a few days now. We have not yet removed content based on these new rules, other than those that already applied to Reddit sitewide. So, we don't believe these will change much in terms of the content and discussion we already enjoy. This is more about setting expectations that weren't really there under the previously absent moderation team. Without further ado:

Rules

  1. Follow Reddiquette - Many of our rules are from the reddiquette. Any violation of the reddiquette can be removed by the moderators, especially ones included here.
  2. No personal attacks, bigotry, or harassment - You may strongly disagree with others, but you may not attack them personally. Bigotry or Hate Speech based on race, gender, sexual orientation, religion, age, etc. will be removed.
  3. Spam/self-promotion - You may post your blog posts, articles, videos, photographs, etc that you have written or created, but that should not be the only thing you do here. You should also participate in discussions (on your posts or others). Dealer/vendor posts are at moderator discretion.
  4. Illegal, sleazy, or dangerous activity - Any posts or comments with illegal or dangerous content will be removed.
  5. Uncivil political discussion - Civil political discussion is allowed as long as it pertains to the automotive industry. Political trolling, flame baiting, slurs, off-topic politics, and harassment will be removed, especially if it violates Rule 2.
  6. No AI Content - Posts containing AI-generated text, images, or videos are not permitted.
  7. Moderator discretion - Any post or comment may be removed by a moderator even if it does not explicitly violate a rule listed here.

Now, as I've said before we're becoming more familiar with our roles and the moderator tools, so we are going to try these out for a while. If we end up needing to add, removed, or modify any of these we will make a sticky post letting everyone know what we've done.

Ultimately our goal here is to foster a friendly, helpful, and productive community. So please help us do that by adhering to the rules and reporting content that you feel breaks them. Likewise, if you feel content was removed unfairly, please send us a message through ModMail so we can review it. For the most part we'll simply be removing content, but for habitual line-steppers, we'll be utilizing the ban function based on the severity of the discretion.

If you'd like to provide feedback on these rules, please do so here! No ideas will be ignored. This is also your chance to ask for clarification on any of these rules, we will not take it personally.

Thank you and happy Exploring!


r/FordExplorer • • Aug 27 '26 Bravo

Repair Advice 3.5L and 3.7L Water Pump Replacement DIY Guide

29 Upvotes

First off, all credit for the content of this post goes to /u/nocommittee1477, a Ford Certified Master Technician of 10 years. He gave me permission to make a post out of his content. I cannot answer your questions myself, so use this as a starting point. He generously spent the time to type this out in his free time so please be respectful of that and use this as a starting point.

These instructions should apply to any Fifth Generation Explorer or PIU with the 3.5L NA, 3.5L EcoBoost, or 3.7L NA. These may also be helpful for other models including Taurus and Flex that use a Cyclone or Ecoboost in a transverse configuration. If yours has the 2.0L, 2.3L or was produced beginning in 2020, this will not apply to you.

  • 3.5/3.7 (for the Lincoln people) water pump/timing chain replacement procedure:
  • Raise vehicle enough to drain oil, reinstall drain plug finger tight (you'll be draining it again). Remove right front tire and inner fender well. Remove air intake hose, air box lid can stay or go as your preference. Remove the evap vapor line from the purge valve and the hard vapor line at the RF strut tower. Remove the fuel line from the fuel rail and the supply line at the RF strut tower (there is also an 8mm head bolt securing the fuel line to the timing cover). Remove the upper intake manifold, aka plenum (note there is a single 8mm head bolt securing the upper intake to a bracket that is semi-hidden under/behind the throttle body). Remove all 6 ignition coils, then LH and RH valve covers. Remove the oil feed rails and intake VCT solenoids (inboard on both heads).
  • Rotate the engine clockwise until both intake cam phasers are at 12 o'clock, install cam locks (you may have to slightly rock the cams with a wrench to get the locks to fully seat, this is normal). Drain and remove the degas bottle and hose. Remove the belt and belt tensioner (belt is easiest removed from the bottom, tensioner from the top). Remove the crankshaft bolt and pulley (a 3 jaw puller or 3 jaw harmonic balancer puller will work). Using your floor jack and a block of wood on the oil pan, jack up the engine to relieve tension on the engine mount, remove the engine mount. Remove all the bolts attaching the timing cover to the engine (don't forget the recessed 8mm head bolt adjacent to where the engine mount was), raising and lowering the engine as needed to get all the bolts out. Gently pry the timing cover free (it's RTV siliconed into place) and remove from the top (some people will recover the refrigerant and remove the AC line, but the job can be 100% done without it, the AC line is aluminum and will flex out of the way enough without damage). With the timing cover off you can inspect all your timing marks, primary chain and primary tensioner. Your timing marks are single dots located on each intake cam phaser and the crank sprocket. Their positions should be as stated, cams at 12 o'clock, crank at approximately 430. The primary timing chain should have colored links to match those timing dots on the sprockets. Two single links to match each cam and one double link to straddle the crank. If you cannot see the colored links, it's arts and crafts time! Mark each single link over the top of the cams and the double link straddling the crank. Inspect the primary timing chain tensioner, there are two different designs, but the rule is the same for both. There are teeth that mechanically lock the tensioner out, if 5 or more teeth are exposed, the primary timing chain is stretched and will require replacement.
  • After you've done your inspections and had your arts and crafts time if required, remove the primary chain tensioner, primary tensioner shoe (it's on a pivot), the long primary guide on the front side of the engine, and the short primary guide on the front side. Remove the timing chain (you have to twist it slightly to clear around the phasers). Use an 8mm wrench and reach in behind the Bank 1 (rear cylinder head) intake phaser and loosen, not remove the bolt holding the other short guide. Once you've loosened it and can pull the guide forward, stop.
  • Remove all the water pump bolts and slowly pull the water pump from the block, I say slowly because you are trying to allow the coolant remaining to drain into the oil pan and not sploosh all over the floor and make a huge mess. Once you're not draining coolant remove the water pump out from around the guide you left and reverse process to reinstall the new pump. To reset the timing tensioner, you'll need either a small straight pick or needle nose pliers, a paperclip, and a vise. The early design tensioners had a separate arm with the locking teeth, to unlock use the pick to disengage the mechanism and squish the tensioner closed with a vise, once completely squished, install the paperclip to keep the tensioner collapsed. The second design tensioners have the teeth made onto the plunger itself. To unlock it, squeeze the lock with needle nose while squishing in the vise, again locking it collapsed with a paperclip. Reinstall the short guide, long guide and the timing chain, placing the marked links to match with the dots, keep all slack on the chain on the tensioner side of the assembly. Install the tensioner shoe and primary tensioner. Before pulling the pin verify all timing marks on both the chain and the sprockets match. As additional verification, there should be 48 links between each intake cam phaser and 35 links between the Bank 2 (front) phaser and the crank. If everything looks good, remove the pin from the tensioner and gently pry the tensioner out a little more to ensure good tension on the timing chain (oil pressure will do the rest once the engine is running).
  • Remove the cam locks and rotate the crank 2 revolutions until all your timing marks are back at the 12 and 430 positions. Verify timing by counting the links between positions, 48 between cams, 35 between Bank 2 and crank. As long as everything is ok, you won't need the cam locks again. If not, reinstall the cam locks, remove the tensioner, and retimed the engine until correct. Clean all the silicone from the block and timing cover, remove and replace the crank seal. Apply RTV to the timing cover and along the rear of the block as during installation you'll likely smear some off the timing cover (optionally you can apply all the silicone to the block side of things if you so desire). Reinstall all your timing cover bolts. Reinstall the engine mount and remove your jack from the engine. Drain the coolant out of the oil pan. The crank pulley can be reinstalled with a block of wood, a hammer, and dirty words, or you can purchase a crank pulley installer tool to press it back onto the crank. The pulley is fully seated when there is approximately a 1/8" gap between the end of the crank and the end of the pulley. Replace the crank bolt with a new one! Torque the new crank bolt to 74ft-lbs plus 90 degrees (its torque to yield, and therefore, one time use). From there you reinstall all remaining removed parts. Refill the engine with oil, change the oil filter and I initially fill the cooling system.
  • Cycle the key on (do not crank) to prime the fuel system and check for fuel leaks. Fully depress the accelerator pedal (this places the engine in clear-flood mode and will not fire the fuel injectors) and crank the engine over for 15ish seconds to rebuild oil pressure. Afterwards, start the engine normally, bleed any remaining air from the cooling system and check for leaks.
  • If you want to replace your cam phasers, secondary chains, and secondary tensioners, you'll remove the phasers with a TP55 (Torx Plus, but a standard T55 will fit just sloppily). The secondary tensioners are pushed into their notes and have no hardware to secure them. The phaser bolts are one-time use as they torque to 33ft-lb plus 90 degrees. The phasers are keyed to the cams and have timing marks that match to the secondary chains to ensure proper cam-to-cam timing. New secondary tensioners will stay collapsed until they are pushed fully in and released after being replaced, it's easiest to unlock them with a smack with a flathead screwdriver and a hammer after you've got your phasers and secondary chains reinstalled.
  • I hope this helps anyone that wants to tackle this one on their own. If you have any questions, by all means ask!

I would like this post to become a central hub for any owners considering performing this repair by themselves, and also to give insight to any owners that want to understand what their repair shop is doing.


r/FordExplorer • • 4h ago

Show And Tell Thoughts On My 2017 Ford explorer interceptor off-road build

Thumbnail
gallery
8 Upvotes

I picked this explorer up back in June of this year n the goal was never to make it perfect.. šŸ˜‚ im apart of the gambler 500 off-road community so yes this explorer will see off road more then on road.. šŸ˜‚


r/FordExplorer • • 4h ago

Repair Advice 2017 Ford Explorer Platinum

4 Upvotes

So I financed a 2017 Ford Explorer with 113,000 miles on it at a local dealership. I have bad credit and I put $1,000 down to get this vehicle. Interest rate sky high. I signed the papers on November 3rd and took possession of it on November 5th.

On November 15th, I was sitting in the vehicle with it idling for about an hour, and I noticed liquid leaking out on the ground in the parking lot from under the vehicle. I really didn’t think anything of it and I drove across town and noticed the fan started kicking on. I pulled into another parking lot and checked under the hood and noticed there was no anti-freeze in the reservoir. I decided I was going to drive to auto parts store to pick up some anti-freeze and then the temperature gage starts rushing over towards hot so I pull into a Lowe’s real fast and shut off the engine. I went in there and bought 2 gallons of anti-freeze and poured a gallon and a half of it in there to get it up to the cold fill line. Then I drove it home and parked it and I haven’t driven it since.

Earlier today, I started it up and let it run for a little bit and when the engine started to warm up, anti-freeze started dripping out from under it again, so I shut it off.

As of today, I’ve had this vehicle for 13 days. It still has temp tags on it.

I called the dealership Monday that I got it from and I told them about it. I also texted them today and I haven’t heard anything back either time.

There’s no warranty, of course.

I don’t make a lot of money so obviously I can’t afford the thousands of dollars it would cost to replace the water pump because I’m assuming that’s what the issue is.

Am I SOL? If I am, I’m considering just calling the lender and telling them to come and get the vehicle.


r/FordExplorer • • 1d ago

Show And Tell New to Us 25’ Explorer

Thumbnail
gallery
69 Upvotes

New to us 2025 Explorer! Love the Space White Metallic. Active Comfort package and upgraded rims. Has the 2.3l. What does everyone think about the platform in terms of reliability?


r/FordExplorer • • 11h ago

Maintenance Advice What 5th gen tires are the best balance of quality and affordability?

2 Upvotes

Looking to replace my tires in about a week or so. Cross shopping Sam's Club, Costco, and Big O. For 5th generation owners, what replacement tires would you recommend?

I'm trying to find a good balance between quality and price, not the cheapest, crappiest tires, but not the most expensive premium grade tires either.

My 2017 has the 245 18 inch rims you get with the base and XLT. Being good in snow and wet weather is ideal, but we don't get much snow near salt lake City, so it's not a hugely important factor. Probably just a good set of all seasons for year round use.


r/FordExplorer • • 7h ago

Maintenance Advice Bank 1 Upstream o2 sensor 2014 explorer sport

Post image
1 Upvotes

How in the world do I unplug the sensor


r/FordExplorer • • 14h ago

Buying Advice 2026 explorer Rear Cup Holder Flap

2 Upvotes

Hey there new owner, my kid uses big Stanley’s, does anyone know of any cup holder extenders to put in the rear cup holder flag so it can fit a bigger cup?


r/FordExplorer • • 10h ago

Repair Advice 2017 3.7 Explorer, Random and intermittent misfires

1 Upvotes

I’m looking for some help with my car. I’ve done a bit of mechanical work just on my own cars I’m just not familiar with newer Fords. I have a 2017 3.7 Ford Explorer. Spark plugs and coils have been replaced. I’ve been driving it for almost a year with no issues. Without any warning the check engine light started flashing and it started misfiring severely. Pulled over and it stalled. Ran codes and it showed several misfires all on one side of the engine. It has had a code for P0430 on that same side of the engine for a while. I crank it back up after a minute without issue and drive for a week with no issues. Same thing happens last night except it takes longer to start up. Then drives fine. Same codes, just misfires and the already existing P0430 on that same side. Anyone have any ideas? I plan to see if the converter is hotter or cooler on one side or the other to make sure it isn’t severely blocked. The harness isn’t loose, I can’t replicate this problem at all. I’m thinking a crankshaft sensor possibly? I’d say EVAP issues if it wasn’t causing one sided misfires. Thank you to anyone who read this far and who may provide any info or assistance, best wishes


r/FordExplorer • • 13h ago

Repair Advice 2020 Explorer XLT Rear Liftgate issue

1 Upvotes

My 2020 explorer is having some issues with the rear liftgate opening. It will not open at all from any of the buttons. I’ve gotten it to open a few times by removing the underhood and cab fuses relevant to the opening system and putting them back in and pressing the buttons. It also worked once after disconnecting the battery for a bit then hooking it back up.

I’ve done a bit of research and have seen that sometimes the rear liftgate opening gate control module needs to be replaced but sometimes it just needs to be ā€œupdatedā€. Just making a fresh post to see if anyone out there has some insight. Thanks!


r/FordExplorer • • 1d ago

Show And Tell New to me explorer

Thumbnail
gallery
53 Upvotes

Picked up a 2022 forged green this weekend!

About time to get a new car!

60k miles and a decent deal I think it was worth it lol


r/FordExplorer • • 1d ago

Show And Tell 2020 Ford Explorer PIU 60K Miles 7,000 Idle Hours

Thumbnail
gallery
52 Upvotes

Just picked up my first ford explorer. Really enjoying it so far.


r/FordExplorer • • 20h ago

Maintenance Advice Is there easy way to fix this cuz I can't get it to open and I don't know if it's the handle or the latches I don't know what it is. It's the rear hatch door with the heck you want to call that. Cuz now not only does my window not work or what are the top part of the hatch is but now the bottom part

Post image
1 Upvotes

r/FordExplorer • • 1d ago

Show And Tell 1996 5.0 explorer

Thumbnail
gallery
17 Upvotes

Picked it up a few months ago as my new daily.


r/FordExplorer • • 1d ago

Buying Advice 2018 and 2019 Explorers, how well are you fairing?

2 Upvotes

Hi!

I posted on a car buying community that I was originally looking into potentially buying an older model Honda, Hyundai, and Ford. Unfortunately, all those options have since fallen through (they got snapped up quick). Started re-searching and found myself really loving the style of the 2018/19 Explorers (plan to test drive one this weekend).

Looking for honest reviews of the car. Anyone still have one that's holding up great? How many miles? Any nightmare stories with them (costly fixes). Should I just stay far away and look at Honda's?

I'm wanting this car to last at least a good 10 years with basic maintenance to keep it going so hoping to hear that it's a reality with this year and style of Explorer.

Edit: Currently viewing 2018 Explorer with 116k, another 2018 with 114K, and a 2019 with 66K (obviously a little more pricier)


r/FordExplorer • • 1d ago

Repair Advice 2014, could this noise be the tensioner

3 Upvotes

Wife said it started making this noise today


r/FordExplorer • • 1d ago

Repair Advice 2008 Explorer – Are these lower ball joints sitting too high?

Thumbnail
gallery
1 Upvotes

Both lower ball joints were replaced during a recent service. Since then, I've had a rhythmic thumping noise while driving.

Looking at the photos, the ball joints seem to be sitting unusually high above the control arms.

Is this normal, or were they installed incorrectly? Could this be causing the thumping?


r/FordExplorer • • 1d ago

Buying Advice Ford Explorer ST line

1 Upvotes

Looking at a 2023 or 2024 used Explorer ST line AWD here in Canada and wanted real owners opinions. Specifically reliability and day to day power from the 2.3 L.


r/FordExplorer • • 1d ago

Repair Advice P2096 Check engine light

Post image
2 Upvotes

2016 3.5 NA XLT 179,000 miles.

Long story short. Took a 1000 mile round trip road trip. My Explorer did great. About 100 miles from home my light came on. It drives fine (maybe a tiny bit sluggish from a complete stop but I am pretty easy on it). I had the code ran at an auto parts store and I only happened to get one picture. I’m not sure if this will help anyone but I’ll attach the photo here.

I don’t know where to start so any info is appreciated.


r/FordExplorer • • 1d ago

Repair Advice fuel press 220psi idle, ford explorer 2022 2.3 is ok?

1 Upvotes

.


r/FordExplorer • • 1d ago

Repair Advice 2018 explorer 2.3 xlt running issues

1 Upvotes

I have a 2018 Ford Explorer XLT with the 2.3 Ecoboost engine. For starts there’s a pretty rough idle most of the time, unless the car is parked and you shut off the a/c then you can barely tell the engine is running.
Then there are the driving issues, sometimes it’s like the car holds the lower gears a bit longer than it should before kicking into gear, and it’s not the smoothest transition.

Then this issue happens.. and it usually happens after driving for a while, or it’ll happen just after my car is parked but left running for a few minutes. Often when I have family in the car, let’s say I run inside while they wait with the car running usually about 5 min, once I come back and start driving, it’s like my car does not want to get out of first gear. It will if I just keep pressing the gas until I reach a high rpm, and it also will if I put it into sport and use the manual positive button to put it into the next gear. If I leave it in sport, it almost avoids this whole issue, but if I put it back into drive, it’ll keep happening as my car starts to slow down, so as I come to lights and stop signs, it’s almost like it abruptly drops into first gear again quicker than it should, and then doesn’t want to come out of first gear on its own or without pushing the gas until to a high RPM or I must repeat the sport/manual gear selector option

Please help! Thank you


r/FordExplorer • • 1d ago

Technology/Features I’m confused about the DRL’s on the 2025 Ford Explorer

Thumbnail
gallery
0 Upvotes

hello everyone, i have a 2025 ford explorer and i have turned my DRL’s on during the day time and when i have them set, it doesn’t work… can anyone tell me what is wrong?
also. when it is the day time, just the headlights are on. not the DRL’s. you don’t see any of the amber light during the day. i do plan on changing the DRL color to white, would that fix my issue?

thank you.


r/FordExplorer • • 2d ago

Repair Advice 2005 explore driver seat

0 Upvotes

2005 explore driver seat want go up and down. I can hear the motor but no movement. Looked online, found it could be the plastic gear. Replace with the metal one. But there is no real picture or video on how to do this. Dose anyone have any kinda link or some kind of directions.


r/FordExplorer • • 2d ago

Buying Advice On the way of checking out a won 3.7 PIU from auction but unclear how to inspect the water pump weep hole and PTU correctly.

1 Upvotes

Won a GovDeals auction for a 2013 Police Interceptor Utility, 3.7L NA, ~110k miles, 4,000 engine hrs, 1,200 idle hrs, at the top of my budget ($6k). I have no repair fund set aside, and backing out costs a $500 default fee and possibly a ban. So I need honest advice on what to check, and whether this is too risky for me.

I'm bringing an LED light bar, a jack, and jack stands, but I'm not sure the surplus facility’s staff will let me lift it or drive in the lot.

Water pump: How do I tell a leaking internal pump from normal? Is the weep hole visible without lifting the car or pulling the front passenger wheel? Do dipstick and oil cap checks catch it early?

PTU: Can a short lot drive reveal problems (whine, clunk on turns), or do I need a fluid check?

Anything else to look for on ex-police units?

Walk-away call: With no cushion, would you pay the $500 and walk if either check looks bad?

For fellow PIU owners: at what mileage did you replace the pump or PTU, what did it cost, and any Houston-area shop recommendations? Did you replace the PTU with a Dorman one or simply drill and install a drain plug?