r/G37 • • 1h ago

G37 KW V3 Coilovers Adjusting Ride Height

Post image
• Upvotes

How do i adjust ride height correctly. these KW V3 coilovers sit extremely low in the rear and i feel it’s maxed out according to KW’s spec. The only way i was able to get it to look somewhat close was lowering the front more and doing that made the spring slightly loose (meaning NO preload) on front. i want the most daily drive comfort i can get while also being lowered. what do i do?

Coupe Sport RWD
Front: 245/40/19
Rear: 275/35/19


r/G37 • • 2h ago

Front wheel bearing difference

Thumbnail gallery
2 Upvotes

I was doing an inspection on my front end to try and sort out some vibrations I’m having at highways speeds. So far I’ve seen bushings on the LCAs are not yet torn but pretty worn and have some flex. The driver side end link is original and appears to be shot. The passenger side has an aftermarket end link. Inner tie rods are tight, I already bought outer tie rod ends to replace before an alignment. I already got new tires and had them balanced. The vibration is not too bad and doesn’t show up every drive, but it’s a pretty decent vibration when it does show up at around 60-80 mph. The lower u joint connecting to the rack is also solid. My main question and point to this post is if anyone can tell me what I’m looking at? The first two pictures of the driver’s side wheel bearing look normal to me but the passenger side wheel bearing looks nothing like I’ve seen before. My car is a sport rwd sedan. It looks almost as if I have an awd wheel bearing on the passenger side. It appears to have splines for a front cv axle. Any ideas and if any of this could be a cause for the vibrations? Thanks in advance.


r/G37 • • 4h ago

Adding paddles to a base Q40

Thumbnail gallery
3 Upvotes

So I have a 2015 infiniti Q40 3.7 AWD base that I want to add paddles onto. (Q40 is just a rebadged g37 sedan.) but the current issue I’m running into is my steering column trim not only doesn’t have the holes for the paddle shifters. But it is also a manually adjusted column, instead of the electric ones that most of them have. I’ve been stuck trying to figure out if I should just cut the original trim, (which I really don’t wanna do because I haven’t tried it before and it likely wouldn’t come out looking all that great 😭) orrrr try to find a base manual steering wheel column that also has the paddle shifter holes. I was looking on Infiniti’s website and such a part did exist at one point, but they don’t seem to make it anymore and I can’t find it anywhere anyone else who has encountered this issue what did you do?

just for reference, the first picture is the one with the electric moving column (I know it’s cut off, but you can see the extension for the button on the left side, which I don’t have). The picture on the right is an example of what I have.

If I try to just buy a trim overlay with the paddle holes, I can only find them with the hole for the electric column button, NOT THE MANUAL. somebody help with some insight.


r/G37 • • 4h ago

Am I fucked??? Water pump?

Post image
3 Upvotes

It’s not the best picture, but something is leaking down here and leaking down to my splash guard. It all started after I got my silicone hoses done maybe 2 months ago, reservoir was bone dry. And I came out of work maybe 2 days ago and it was dry AGAIN . I happened to look down and see tiny drops coming from the splash guard. I’m going to the mechanic tmr.


r/G37 • • 4h ago

What new rims should I go with in my sedan? And what rim size?

Post image
5 Upvotes

r/G37 • • 5h ago

Joining this sub !!!

Thumbnail gallery
7 Upvotes

Switched from a TSX to a 2013 G37X


r/G37 • • 7h ago

2009 G37x Sedan HDD failure.

Post image
4 Upvotes

Hi all. My wife's beloved 09 Sedan- nav equipped has been freezing up intermittently on logo screen boot up for 2 days now.

Today this popped up.

Don't care much about nav functionality, but definitely need hvac control! What's the most cost-effective fix?

I'm an experienced mechanic, but a bit out of my league on can-bus integrated systems.

Any help appreciated.

Thanks!


r/G37 • • 7h ago

Catalytic converter?

2 Upvotes

r/G37 • • 9h ago

coolant leaking coming from radiator neck?

3 Upvotes

been having a coolant leak for over a month now. been to to the shop 3 times alr only thing they can do is reclamp the hoses. this morning after a cold start i think i finally found the culprit. how bad is this ?


r/G37 • • 17h ago

Has anyone bought these side skirts? And if so how do they fit

Post image
5 Upvotes

r/G37 • • 19h ago

ISR Poly Motor Mounts

Post image
2 Upvotes

Anyone have any experience with these? Wondering how much of an increase in NVH you would get with poly motor mounts? For the price they seem like a good option. I need to replace my mounts soon, and all the aftermarket oem replacements have shitty reviews.


r/G37 • • 20h ago

How to replace g37 height adjustment motors?

2 Upvotes

Recently got some sport seats and they’re awesome but my driver side doesn’t want to adjust height so im to the ground lmao. does anyone have a video or a forum where they fix the height adjustment motor/replace? all other controls work and switched the switches too and height adjustment motor doesn’t make any noise. pls lmk i hate driving like a grandma


r/G37 • • 21h ago

Does this sound seem normal to you guys? it’s coming from the belt

2 Upvotes

r/G37 • • 22h ago

2009 Infiniti G37x Coupe – Whining noise that increases with RPM. Any ideas?

3 Upvotes

Does anyone know what could be causing this whining noise on my 2009 Infiniti G37x Coupe?

I originally thought it was the power steering pump, so I replaced it with a brand-new Astemo pump, but the whining hasn’t changed at all.

The noise gets louder and higher pitched as the RPM increases. I also noticed that when I turn my headlights on, the whining gets slightly quieter even though the engine idle stays the same.

I don’t know much tbh but I’m guessing the alternator, belt tensioner or idler pulleys.

Has anyone experienced something similar or figured out what was causing it?


r/G37 • • 23h ago

Which coil packs do I pick ?

Thumbnail gallery
6 Upvotes

(2013 G37x)Is a coil even the issue, I had cylinder 1 misfire at first yesterday but I guess I didn’t react quick enough cs today it says random now. Just wanna see what somebody else thinks any help is appreciated, I wanted to see if replacing the cylinder 1 coil would still make a difference so tomorrow I’m gonna try swapping cylinder 1 and another cylinder and see what happens.