r/HenryRifles • u/Arndog762 • 2h ago
r/HenryRifles • u/RugerUser • Sep 21 '25
Announcement Thanks and a caution...
First... I just received notification that r/HenryRifles has exceeded 6000 members. Thanks to each of you for helping this community grow, let's keep it up!
As a result of some cleanup of the subreddit, a very few of you have received notification that your post or comment has been deleted. Most of these were due to violation of the No guns or ammo sales rule. Please understand that this is a Reddit rule that is strictly enforced by Reddit, and violations could result in our sub being banned. Thanks for your continued cooperation.
r/HenryRifles • u/InevitableSafe5579 • 1d ago
Optic mounting on the Henry Supreme
I recently bought a Henry supreme chambered in .223/5.56 but the waiting period will be a few more days. After I bought the rifle I ordered the picatinny rail from Henry Outfitters (HEGW9/10PR-1) and Warne 513LM QD scope rings to mount a Vortex Strike Eagle 1-6. It doesn’t mention it on the website listing but on the back of the packaging for the picatinny rail it says they advise against using QD scope rings. Will my setup be fine or should I get another picatinny rail like the Ranger Point Precision Rhino rail?
r/HenryRifles • u/cptmcbro • 2d ago
My Sunday Project
Got her assembled zeroed and to the range! Best Sunday I’ve had in a looooong while.
The Lever Gun is: Henry H10 Protector Carbine chambered in 45-70. The new parts are from Midwest Industries.
Side arm is the Shield X 9mm
I’m thinking of getting a Burris long eye relief scout scope with which detach mounting rings but we’ll see lol.
To anyone wanting to do this mod know that the Brownells guide is a bit different at the hardest part which is using these lil wedges. I opted to mount them first then slide the guard over the barrel instead of losing my sanity to the dex check that was trying to line up those lil buggers. Other than that the guide was perfect.
Have a good week y’all.
r/HenryRifles • u/7H1town3 • 3d ago
45-70 hunt!
Inlaw called me at 5am Saturday and said be ready to be in the blind at 4pm... so took off 4.5hours to south texas for a quick hunt. Right at 5:30 I harvested 2 bucks with the Henry H010XCW-4570 with a TX hunting tools .45 GASKAMMER attached using hornady subsonic.
Both were standing next to each other. Took the first, and the second ran right up to the blind and I was able to take that one as well.
Both dropped where they stood.
First shot was 80yards out, second was about 15 yards.
The 45-70 preformed perfectly. Very pleased with this rifle, I cant wait for a day whej I get to pass tthis rifle along to my sons and him to his son. Amazing work being done over at Henry.
Good luck everyone! I hunt Athens, Texas next weekend to fill the rest of my tags god willing.
r/HenryRifles • u/Firststep7 • 3d ago
Long ranger 308
Any recommendations for factory loads?
r/HenryRifles • u/LeverActionHonky • 2d ago
HELP! small part identification
Recently installed a ranger point precision kit on my Henry big boy x .44mag. All went smoothly and the rifle looks great, however today I was dry firing, thought I felt something fall from the rifle, and found this small pin on the ground. Anyone know what this could possibly be or if it may coincidentally be from something else ( I work on all my guns around this area)
r/HenryRifles • u/the_scarry_lobster • 3d ago
Henry long ranger modding
Hey interweb folks I have some questions regarding modifying a henry long ranger by adding winchester 1895 stocks to it and a skinner ladder sight plus a lyman apature sight but I'm a bit unsure on how much a 95 forend would have to be modified to work with long ranger stock attachment rod...stock tube?
so summerized how hard would it be to give it the old west look?
r/HenryRifles • u/Rich_Command5842 • 4d ago
henry big boy dropped vertical on stock, now won’t fire
i’ve had this henry big boy for about a year now, more specifically a golden boy i guess, but i just took it to the range and my rifle bag unzipped and it dropped vertical on the butt stock. it’s been fired about 2-300 times by now and when i brought it in today, click. then followed by another, and another. i tried about 10 more times and much like the definition of insanity, nothing changed. what could have happened? obviously something inside has shifted or moved but i am appalled that a 2 foot drop on its stock has rendered the rifle immediately inoperable.
r/HenryRifles • u/MiSparky692 • 5d ago
First lever gun, Henry .360 Buckhammer!
Been toying with the idea for over a year now, and finally (no pun intended) pulled the trigger tonight. Pretty excited! Paired it with a vortex crossfire 2 HD 3x9 40
r/HenryRifles • u/FewDot6646 • 6d ago
Henry .308 long ranger bolt battery issues
Are these rifles trash or is my bolt trash ?
This is my first post on Reddit so bear with me I’ll try to be concise This year I got my hands on a long ranger 308 carbine as stated. The action was a little stiff out of the box and wore in over a couple hundred cycles.
The only part that is a problem for me is that last quarter inch of travel to lock it into battery or open the action is ”Clunky“ when there is no round being chambered.
The problem is exponentially worse when I attempt chamber a round. I have been using Hornady eldx and if I long stroke swiftly (pause) it usually chambers okay. When I try to slowly and quietly chamber a round in the woods it fetches up. That last 1/4-1/8 inch will only latch if I squeeze way harder on the lever than I would expect and then it SNAPS shut very loudly. (Absolutely unacceptable for a hunting rifle IMO).
The top portion of my bolt looks like it has a strike mark or something, just after the geared portion ends. I’m wondering it this is normal for the bolts, or if anyone else has had this issue?
r/HenryRifles • u/m_spoon09 • 8d ago
Model X 30-30 first deer
Also my first deer. Got this over the summer specifically for hunting. 124 yard shot from the blind. 6 point buck.
r/HenryRifles • u/DJG7311 • 8d ago
Henry supreme
Thoughts and suggestions on the new supreme so far.
r/HenryRifles • u/ActionAdditional6741 • 8d ago
Henry Supreme barrel change at home?
Before anyone asks no I don't want to send my rifle into line 49 for them to do it.
I don't have anything against them. But I just want to do it myself at home.
Pretty much I have a 300 ham'r AR barrel that I want to put on my Henry Supreme. The gasport will be sealed. And I have the aftermarket barrel nut from boss barrels.
What I want to know is is there anything particularly weird to getting the original barrel / barrel nut off?
For example say I don't care about the original barrel nut.
Can I just Chuck the thing in a vice and pipe wrench it off? Or is there anything weird going on?
(Yes I know it's aggressive. But I'm a plumber by trade. It's the tool I have)
Second. Once it's off I should be able to just put the new barrel on and do a standard tightening procedure with a torque wrench right?
Sorry if this sounds violent or shortened. It's just seems that getting clear info without someone saying Go to line49. Isn't really out there.
Thank you.
r/HenryRifles • u/CoolCurrency5852 • 10d ago
Does anyone own (or has handled in person) BOTH a new Ruger Marlin and a Henry SPD Hush?
r/HenryRifles • u/RonBurgundyCH9news • 13d ago
Henry Model X 30-30 ammo grouping
So I recently purchased a Henry Model X in 30-30 (The Lord’s caliber) and I have quickly fallen in love with it. I came from a model ‘94 top eject and the difference is night and day.
So I decided I’d take it to the range to zero the scope I bought with her ( Vortex triumph HD 3-9x40 ) and I wanted to share some interesting results.
I test 4 different rounds at 50 yards.
TOP MIDDLE: first attempt after bore sighting was with Herters 150gr, had the first one run away and after an adjustment the grouping got real tight.
TOP RIGHT: I had to make sure I was seeing something so I ran the Herters 150gr again and it was spot on
TOP LEFT: I used Remington Cor-LKT 150gr
BORTOM RIGHT: Winchester hunter xtp 150gr
but what was MOST interesting was the BOTTOM MIDDLE / BOTTOM LEFT when I used Hornady LeverEvolution rounds and I was shocked by how scattered the groupings were and how the rounds started TUMBLING within 50 yards
Has anyone else experienced this? Or does my Henry just hate expensive ammo😂
r/HenryRifles • u/Cheap_Fisherman_6695 • 13d ago
360 buck hammer with Red dot vs Scope
I’m working on putting together a 360 buckhammer to deer hunt in Iowa. Trying to decide on an optic. I already have a 400 Legend I’ll carry in places I’ll be able to shoot farther with a vortex Triumph on it. Trying to decide if I’d rather go with a vortex strike eagle 1x8 or some smaller red dot since it will primarily be my brush gun but occasionally may need to reach out a couple hundred yards. Just curious what everyone else is doing pictures are appreciated
r/HenryRifles • u/SweetNutMeats • 16d ago
Help!
I cant get a round chambered in my Henry X .357. Ive tried an old box, new box of .357 and even 38 special. It always stops halfway way. Ive taken it apart and noticed there is some kind of brass fitting/receiver. Is that supposed to be there? Is it a perfectly half broken casing? The gun is all stock i haven't done any modifications to it. I dont see any debris or barbs but it acts like its hitting something? The round that you see in the picture was one from a box I previously shot 12 rounds through with no problems. I thought maybe it was the ammo but now I have no idea??
r/HenryRifles • u/7H1town3 • 17d ago
Ready for this year's hunt!
Going to harvest south texas nilgai and whitetail this year god willing
Henry Model H010XCW-4570
TX hunting tools .45 cal GASKAMMER
Burris Droptine 3-9x40mm
(Ammo pictured)
r/HenryRifles • u/Aggressive-Ant-6320 • 16d ago
Low-Profile Front Thermal Clip-On for Henry Supreme 223 / LPVO Setup
Hey everyone,
I’m looking for a front thermal clip-on for a Henry Supreme .223 that fits a highly specific, low-profile clearance requirement without hitting my rail. I want to keep this entire setup as low as practically possible to maintain a proper, natural cheek weld on the stock.
My Exact Gear:
- Rifle: Henry Supreme .223 with a Ranger Point Precision (RPP) PewView top Picatinny rail.
- Day Optic: Vortex Strike Eagle 1-8x24 FFP LPVO (30mm main tube, 30mm straight front objective).
- Budget Target: Around $750 – $1,200 USD (similar to DNT Hydra-Mini or ATN Tico 6 pricing).
The Clearance Puzzle:
I haven't bought my scope rings yet, but I am leaning heavily toward Leupold 30mm Low (0.82" center height) or Medium (0.95" center height) rings to keep the scope slammed down to the gun. Because these rings are so low, they leave a tiny air gap of either 5.8mm (Lows) or 9.1mm (Mediums) directly between the bottom of the scope tube and the flat top of the RPP rail.
Two questions for anyone running a similar setup:
- How will the Leupolds handle the objective clamp route? If I use a 30mm Rusan Modular Clamp to hang a budget thermal directly off the front tube of the Strike Eagle (unbolting the thermal's factory base), which specific units have a flat-bottom chassis or a slim, cylindrical neck that can actually clear the rail in Low or Medium rings? Does anyone have experience with how the Leupold QD levers interact with this tight under-scope space?
- Is a front Picatinny mount viable out front? If I ditch the scope clamp entirely, is there any ultra-low profile, third-party Picatinny QD mount out there that lets a budget thermal sit low enough out in front to align with a 0.82" or 0.95" scope centerline? Do we even have enough physical rail slots left on the front of an 11-inch RPP PewView rail to squeeze a weapon-mounted thermal ahead of a 10.4-inch Strike Eagle?
Appreciate any insight, measurements, or ring recommendations from anyone who has wrestled with putting front thermals on continuous rails with low hunting setups!
r/HenryRifles • u/Easy-Breath4547 • 17d ago
Is this normal on a Henry Big Boy H006GC?
I can’t remember if it was like this originally or should I get ahold of Henry?
Also it’s in .45 colt.