r/HomeImprovement • • Aug 21 '26

Andersen quoted $26,000 for new front door. Is that crazy?

2.6k Upvotes

I just got a quote for a new front door with sidelights from Renewal by Andersen for $26,000. The original estimate was $33,000 but there would be a discount if I purchased within 15 day.

I’ve never bought a front door before but this price seems wildly high to me for a relatively basic door. Is this normal or am I being ripped off?


r/HomeImprovement • • 13h ago

I asked an insulation contractor to seal off a utility chase with foam board. He filled it with cellulose instead. I dont know what to do now.

112 Upvotes

I have a mid century 1.5' x 10' chase that connects the 2nd floor attic to the basement. Its filled with utilities. Plumbing, electrical, HVAC. I asked the contractor to fireblock it with foam boards and spray foam. Instead, he completely filled it with some kind of loose fill insulation. Probably cellulose. He also got it all over my yard. Everywhere.

This is a contractor I already had problems with. I am at a loss for words. I dont know what to do now. Is this bad? I fear it might conceal leaks. Or worse, get sucked into the joints of the old HVAC and distribute it around my house.

I'm very very frustrated. Hoping you guys can provide some insights.


r/HomeImprovement • • 42m ago

Roof leaking heavy rain

4 Upvotes

We’re currently undergoing heavy rain right now. We found out there are leaks in two different sides of the house.

I found one side of the house to have a leak from water trailing down a pipe which leads up to the roof (first few pictures).

The second leak is at the opposite side of the house and comes from a crack (last picture).

We currently are trying to collect the water drops from the ceiling.

What are our options right now? I feel like the long term solution is to call a roofer to fix this, but we are expecting rain everyday for the next two weeks. Is there something we can do temporarily to address this? Always lived in an apartment so not sure how to go about this right now. Thank you in advance for the help.

https://imgur.com/a/Jx3G3mN


r/HomeImprovement • • 1h ago

Best way to remove vinyl click without damage?

4 Upvotes

I had a beautiful floor that my dad installed for me. The next day he had this hare brained idea he wanted to remove this wood stove is not operational from our basement (disconnected from the fireplace). I told him and my husband if they want to see if they can lift it go ahead. But if they CAN’T then just leave it and we will pay for junk removal.

So what did they do at my dads insistence? Dragged a 300-400 lb wood stove across the new floor on only one sheet of cardboard…

Completely idiotic and the floor was ruined in 5 min.

And the worst part is they would have had to carry it up some stairs. I said… how did you think you were going to remove it if you couldn’t lift it? Then I forced them to lift it back to the hearth which they easily did — which is the worst part

So now there is a large gouged drag marks in the middle of the basement floor, because the cardboard held out for a little while before the wood stove tore through it.

He does feel bad and I’ve been livid since it happened. But now I don’t know how he is going to fix it without basically redoing the whole floor?

There’s like 11 rows before the damage from the “correct” side to install. And then the damage is across about the same amount of rows. And the rows are very long unfortunately.

Does he literally have to lift up the entire floor to fix this? He already bought a couple boxes. There’s 27 damaged boards

We also just had a giant couch delivered because I thought the flooring was done… sigh.

Any tips would help. How much damage will happen trying to fix it?


r/HomeImprovement • • 3h ago

Which upper cabinet layout looks better? Uniform door widths vs aligned with lower cabinets

5 Upvotes

I'm finalizing a 115" condo kitchen and am stuck between two upper cabinet layouts (see attached elevations).

Image link: https://imgur.com/a/TkyhrGZ

Option 1 (Image 1):
All upper cabinet doors are the same width (12")
Creates a very consistent rhythm across the upper cabinets
Cabinet divisions don't perfectly align with the sink cabinet below

Option 2 (Image 2):
Upper cabinets are aligned with the lower cabinets and appliances
The sink area is more centred within the upper cabinet layout
Results in varying upper cabinet widths, including a narrower cabinet on the far right

The microwave is centred over the stove in both layouts.
Ignoring colours, hardware, and appliance choices, which layout looks more balanced, intentional, and high-end to you?
Would you prioritize:
-consistent upper door widths, or
-alignment of upper and lower cabinet divisions?

I'd especially appreciate feedback from kitchen designers, cabinetmakers, or anyone who has done a custom kitchen.
Image 1 = uniform upper door widths
Image 2 = uppers aligned with lowers

Image link: https://imgur.com/a/TkyhrGZ


r/HomeImprovement • • 3h ago

Need help with furnace room bifold doors

2 Upvotes

My louvered bifold doors for my furnace room are broken and need replacing. The only thing is that the previous owners got custom doors.

The gap of the entry is 48in width x 75in height.

I can’t find louvered bifold doors at that height so I’ve been looking towards shutters. But, finding shutters at my desired dimensions for a decent price is impossible.

Any guidance or suggestions is appreciated


r/HomeImprovement • • 3h ago

Has anyone ever installed a central vacuum dustpan?

2 Upvotes

I have a central vacuum system that I don’t use. I’m thinking about installing a central vacuum dustpan in the areas where I sweep the floor. Has anyone ever installed these? Is it worth installing?


r/HomeImprovement • • 19m ago

Staircase remodel - looking for suggestions

1 Upvotes

So we just bought a foreclosure house that we plan on fixing up while living in our current home. This is one of the first things I need to get taken care of because that room is going to be turned into another bedroom. Right now there’s a nasty drop when walking out of that room. Here is what I came up with using ChatGPT to try and fix the stairs.

Is there a better option?

I’ve never worked on stairs. Hoping I can somehow make this happen.

images


r/HomeImprovement • • 38m ago

What to put over Redguard on concrete slab

1 Upvotes

Previous contractor suggested hardy backer with tile, however we fired him (corrupt) so back at square one with concrete slab covered with one coat of Redguard.

I didn’t approve the Redguard now stuck with it. The room gets very cold which is why I’m against tile now. Would a vapor barrier + click in LVP be sufficient?


r/HomeImprovement • • 4h ago

Battery Back + Duel Fuel Generator

2 Upvotes

Looking to add a battery backup and a generator that can charge the batteries is a few hours. (5-7 kWh) I’m trying to avoid running a generator 6+ hours during an outage.

I’m finding very few battery systems that allow a high rate of charging (240v) while simultaneously allowing 120v output.

I know this all depends on usage, battery size, charging rate, generator output, THD… I can work that out. I don’t see much of a point in charging while not in use or charging at low speeds.

Any suggestions for generator and battery combos people are using to accomplish this?


r/HomeImprovement • • 54m ago

Water leaking in through top of window during rain storm

1 Upvotes

https://imgur.com/a/nsz6aAx

Our atmospheric river has arrived and we've got water dripping in through the top of the window. Whats the short term fix? And what's the actual fix for when it's dry enough to climb up a ladder?


r/HomeImprovement • • 1h ago

Is this mold or water damage?

0 Upvotes

Outer Shower Corner:

https://imgur.com/a/PYztzbg

Inner:

https://imgur.com/a/CrrQU37

I bought my first home, which was newly built about 3 years ago. During the first year, I noticed what looked like a wet stain on the wall near the shower. The builder came out and recaulked the shower. Unfortunately, the builder's 1-year warranty has since expired, and after that, I didn't notice any further issues.

Today, while cleaning, I noticed a crack in the corner of the wall on the outside of the shower. There's also some dark discoloration that looks like possible mold or water damage. I'm wondering if this could be related to the original shower leak or if it's something else.
Has anyone experienced something similar? Is this something I can fix myself, or could there be a bigger underlying issue that requires removing the shower and opening up the wall?

I'd appreciate any advice or suggestions on how to approach this before I start tearing things apart. Thanks!


r/HomeImprovement • • 1h ago

Under sink water filter gets heated up by nearby heater vent. Should this be a concern?

1 Upvotes

It’s warm to the touch in the morning. I usually run the water through til it’s cold. Usually takes a minute or so. Heater vents runs under the sink cabinet.

Usually happens around noon when heat is on the most. Should I cover the filter in insulation?


r/HomeImprovement • • 1h ago

Is this an appropriate mounting bracket for an exterior stair railing? The railing is wobbly.

1 Upvotes

I recently hired a contractor to install a wooden exterior stair railing with aluminum spindles on my newly poured concrete steps.

The railing looks nice overall, but I’ve noticed that it has quite a bit of side-to-side movement when pressure is applied to the top rail. The movement is especially noticeable near the bottom where the 4×4 posts connect to the concrete steps.

The brackets currently installed are marked MiTek D44-TZ. They appear to be surface-mounted to the concrete with several fasteners, with the 4×4 posts secured inside the brackets.

I brought the movement to the contractor’s attention. Initially, he told me that the brackets were bending more than they should and that he had selected the less expensive brackets to save me money. He has since suggested replacing them with different brackets, but is now saying the original brackets were designed for railing posts and installed correctly, and that the issue may be a manufacturer problem.

He is asking me to pay an additional $60 for replacement brackets and $75 in labor to swap them out.

I’m trying to get some independent opinions before moving forward.

My questions are:

  1. Is the MiTek D44-TZ an appropriate bracket for securing a 4×4 post supporting an exterior stair railing?
  2. Is this type of bracket appropriate for mounting directly to concrete, rather than a wood deck?
  3. Should there be this much side-to-side movement when pressure is applied to the top rail?
  4. What type of mounting hardware would you recommend for this application?
  5. Would you consider replacing these brackets a correction of the original installation or an upgrade that the homeowner should pay extra for?

I’m not a contractor, so I’m relying on professional judgment when hiring someone for this type of work. I chose the wood railing option because it was more affordable than aluminum, but I still expected a sturdy and safe installation.

I’d appreciate opinions from anyone familiar with exterior stair railings, post anchors, and concrete mounting. As well below is a link to the railing bracket attached to the concrete and a video of the railing.

https://imgur.com/a/qtSIirv


r/HomeImprovement • • 9h ago

Woke up and saw yellow liquid running down my bedroom wall

4 Upvotes

Hi all,

I noticed on my bedroom wall (the furthest from the shower room) facing the exterior, some yellow liquid running down the walls, and the edges of the ceiling in that area looking a bit damp. That whole side of the wall feels damp, and there's even one bubble forming.

I went up to the loft, but couldn't see any glaring issues, picture attached.

It did rain, but I'm not sure if this is condensation or what?


r/HomeImprovement • • 1h ago

HOA Roofing Project Caused Water Damage — What Compensation Is Reasonable? (Washington State)

1 Upvotes

Our HOA hired a roofing contractor for a major roof replacement project, and our home experienced multiple water leaks during construction, damaging ceilings, flooring, and other areas.

The contractor has arranged for a third-party restoration company to handle the damage and cover repair costs.

However, the ongoing remediation has significantly disrupted our daily lives, with loud dehumidifiers running 24/7, time spent coordinating repairs, and concerns about potential impacts on our home’s future resale value.

Beyond the repair costs, what additional compensation, if any, would be reasonable to request? For example, loss of use, temporary accommodations, lost work time, or potential property value reduction?

Has anyone dealt with a similar situation in Washington State? I’d appreciate hearing about your experiences and how these claims are typically handled. Thank you!


r/HomeImprovement • • 3h ago

What floor and counter top with this backsplash?

0 Upvotes

We are changing out our countertop and want one that is lighter and we want to change the floor as well. We love the backsplash, which is just a couple years old. I am looking for specific product suggestions for both that will coordinate well.

here the kitchen: https://imgur.com/a/xgUtBpV


r/HomeImprovement • • 1d ago

Gas company wants to tear concrete and relocate the meter

67 Upvotes

Hello, Reddit!

My gas company has been doing some work on my street, replacing gas lines. While doing that, they came to me and said that:

a) My gas meter needs to be upgraded to a larger-capacity one.
b) The meter needs to be relocated to a different location.

Currently, the meter is in my backyard, behind a fence. The fence surrounds the entire backyard because I have a pool, so removing it isn't really an option. However, the gate has no lock or key, so anyone who needs access to the meter can easily get in.

The other issue is that the area where they want to relocate the meter is covered with concrete. This means they'll have to tear up part of my patio, which was recently renovated, and I'm not particularly happy about that.

I contacted the county commissioners, and they told me that having the gas meter behind a fence isn't a code violation.

So I'm trying to figure out a couple of things:

  1. Is this relocation actually necessary? Or is the gas company simply trying to make things easier for themselves? If the existing location is code-compliant and the meter is accessible through an unlocked gate, can they still require me to move it?
  2. Who is responsible for repairing the concrete? If they have to tear up my patio to relocate the meter, are they responsible for restoring it to its original condition, or would that expense fall on me?

I'd really appreciate any advice, especially from anyone who has dealt with a similar situation!


r/HomeImprovement • • 3h ago

Fixing a cracked foundation

0 Upvotes

My shed’s floor has an X crack, and it’s very wide. The previous homeowner has tried to seal it, but it’s split open again.

https://imgur.com/a/gLrwIar

I wanna seal it so water can’t get in. I removed the old crumbling concrete/seal and now have an empty crack that goes down to the soil.

What should I do next?


r/HomeImprovement • • 16h ago

Electric Repair Quote

9 Upvotes

Received this quote from an electrician today do his prices seem realistic? Normally I'd get a 2nd or 3rd quote but everyone in our area want $80-$100 just to walk in the door. His work come highly recommended so that isn't a concern.

3hr Standard Service 1x $79.00

15-20 amp power D2 1x $756.00

Bring three 20 A circuits from the main electrical panel into the mechanical room under the kitchen. Includes dual-function overcurrent protection on all three circuits and a 5•year warranty.

15-20 amp power D1 4x $418.00 = $1672.00

Fish 20•amp copper wiring up to 4 outlet locations in kitchen, including existing openings on left and right side of sink and cutting in 2 new locations on left side of range at existing switch height 5•year warranty on wiring and premium tamper-resistant outlets.

Demolition L1 1x $469.00

Rework Wiring in the basement so that the fridge stays on the existing circuit and remove any unused Wiring that is accessible.

15-20 amp power D1 1x $418.00

Install new pipe. Make that a steel pipe in the laundry area and set the junction box. Install a new laundry outlet with an industrial cover.

Permitting L1 1x $104.00

Includes permit and passed electrical inspection.

Total $3498.00


r/HomeImprovement • • 4h ago

Outdoor overhead light doesn't turn on during the cold weather but works when it's warmer

1 Upvotes

I've got an overhead light outside that works on a photoelectric switch. Problem is it never turns on when it's cold and it does work when it's warm. I have no idea why. Weather got colder, light stopped working. Weather went through a warm week and the light started working again. Now that it's colder again, it doesn't work.

I talked to my buddy who is an electrician who did work back there and he thinks it's a bad ballast on the overhead light and it needs to be converted to an LED. He offered to do it for free. I agreed to take him up on his offer. That was months ago. He's never gonna show up. I ran the problem through an AI and they claimed the photoelectric switch is probably bad. It's only 2 yrs old though. I'm trying to figure out what the most likely cause is before I start spending money on this.


r/HomeImprovement • • 4h ago

Please help - 2nd floor joists pushing up the floor

1 Upvotes

My ask: I’m hoping someone on here can point me in the right direction… do I call my insurance company? A city inspector? Where do I begin?
(I live in SE Michigan)

The situation: I’ve lived in my house for 6 years, it was built in 1980 and I bought it from a guy who bought it pre-foreclosure and flipped it himself. Tons of cheap materials that I’ve had to replace over these years but overall I love our house.

When I first moved in there was a small bump under the carpet near the top of the stairs. I assumed the flipper had been lazy and there was damage to the subfloor and he just threw a piece of plywood on top. But when I ripped up the carpet to put LVP in 2023 I saw the subfloor was bulging up. I cut out a pice of the floor and saw a joist had either swelled or somehow moved. There were no signs of water damage and no other indications of a structural issue. The bump had been there for 3 years so I assumed the movement happened long ago and had stopped so I planed down the top of the joist to make the floor level and I put down the LVP.

You know where this is going. The movement has not stopped and seems to be getting worse in the last 6 months. The LVP is now getting pushed up and the drywall right at the top of the stairs is cracked.

Who do I call to look at this and tell me what is going on so we can fix it?


r/HomeImprovement • • 4h ago

Face plate for power outlet not flush

0 Upvotes

https://imgur.com/gallery/face-plate-not-flush-f6IbAP1

I’m trying to figure out if these are just crappy face plates. Or if there’s another way to fix this.

All the stuff I find on YouTube is for when the plugs are too insect into the wall. But in my case, either the plugs come out too far or these are just the wrong face plates.

The electrical box seems fairly secure. There’s a little play to it. But not enough to explain this size gap.

Is there some kind of spacer I can put behind the face plate to fill in the gap?


r/HomeImprovement • • 4h ago

Want to put in pull out drawers in a stand up cabinent.

0 Upvotes

We have a large stand up cabinet in our pantry (pictures below). I want to put in pull out drawers that can handle a decent amount of load. You can see how full it is from the pic so just to support that.

Here is is
https://imgur.com/a/rzhDe2F

I wouldn't say I'm a master carpenter but I can hold my own. I've have put in pull out drawers before but they've generally not had a problem in terms of clearance and what not.

Here is what I'm thinking, have a few questions, and would also welcome any feedback or tips or tricks.

The measurements are in there, I'm thinking an inch clearance for the drawer. One thing I don't know if you can see is that there is kind of a lip on the sides that comes in. So my plan is to get the tracks that sit on the bottom as that plywood looks decently thick.

If that sounds like an overall plan, two questions I have.

Is there a site where I can buy stuff precut to fit my specs so I can just put it together? If so would love recommendations. I CAN cut all of this wood myself it would just add time.

If I should just get my own wood, what would you all recommend. I don't care a ton how it looks and if I wanted to get fancy I could do something nice on the front and then just plywood right? If so, how thick of plywood would you go. Thanks in advance