r/IndustrialMaintenance • u/allgasnobreakstoday • 5h ago
r/IndustrialMaintenance • u/TrumpEndorsesBrawndo • 46m ago
Does that mean no one has ever used this belt?
r/IndustrialMaintenance • u/LiDAR3DGUY • 14h ago
Question Corrugated Plant 3d scan
3d scan I recently did. Spend a lot of time scanning in these environments. Anyone work at a plant that has a digital twin of it?
r/IndustrialMaintenance • u/SSJBlueVegeta • 12h ago
Funny Cold pizza
Walking into the shop office and behold this contraption from my coworker 😆
r/IndustrialMaintenance • u/Ok_Parfait4658 • 15h ago
First page of the first panel the new guys wire up
I didn’t get a chance to stop them. I blinked and this happened…
r/IndustrialMaintenance • u/Lower_Research_5157 • 18h ago
Can you tell what is making it need to be reset every 20 minutes or so?
r/IndustrialMaintenance • u/storms_of_my_life • 8h ago
Rant- too many tools/toolboxes? This job has made me lose skills?
I’ve been doing industrial maintenance for seven years. Four of those were at a die cast plant, and three years at a robotic assembly welding plant. First place is where I acquired most of my tools and they saw regular use. Now I barely use more than an Allen pack, crescent wrench, Knipex pliers, 11-in-1 Klein screwdriver, welpers, and dowel puller, punch, and hammer for changing small cylinders out.
I’ve went through several toolboxes over the years trying to find the setup I liked most. The most recent one was a US General full bank service cart, 5 drawer cart, and a 40” Snap On heritage single bank box. I decided I hated the tiny drawers on the Snap On and traded it for an AR-15. I ended up taking tools home that were in that toolbox and now they’re in crates doing nothing.
Now for the truly ranting part. Since I’ve been here I get frequent comments about having too many tools, or a lot of tool boxes, and shit along the lines of no one needs that many, the implications always being that I’m weird.
But who do they call when they run into that odd scenario that they need something they don’t have?
This place also has toolboxes they bought for techs, so people kind of move into them when someone leaves or whatever. I find it all really strange since at the die cast plant we had to buy our own.
I’m about to buy a US General 56” cabinet and bring tools back because I have no garage and I’m sick of seeing them in crates doing nothing. But then I’m second guessing myself because I’ll just be dealing with more comments and other bullshit.
So do I just have too many tools? I’d hate to sell and then rebuy and lose money in the process.
Next rant- this job has made me lose skills, or so it seems. I haven’t used a meter more than maybe thirty times in three years. No real welding. No real shop to weld or work on things - work on things? Who am I kidding? It’s either sent out for repair or just thrown away. Getting out stripped bolts? That’s a tooling job, so not gaining any experience there. Nothing really hydraulic. I’ve made a handful of lines but that was to replace water lines that we don’t carry fittings for. Everything is robots, sequencing, and pneumatic cylinders. I think I’m losing my mind working here, but I’m also doubting that I can make it anywhere else now.
And as a final note that doesn’t matter but does matter, I’m a female.
To sum it all up, is this job just that out there, do I have too many tools, or really do I just need to leave and relearn skills I’ve lost somewhere else?
Thank you all for reading this ridiculously long rant.
r/IndustrialMaintenance • u/milehighideas • 1d ago
When I’m out of the factory and night shift is like “oh we can rewire the new heaters without asking how”
Well this lines going to be down for a while as they have no replacement
r/IndustrialMaintenance • u/Impressive-Sympathy4 • 19h ago
Question Self Employed
Anyone ever go out on their own? I’ve got 15years heavy manufacturing experience. Last 5 being supervisor. I got 6 months salary saved, tools, and a truck.
All I do is hear about companies needing maintenance guys and then just contract it all out at $100+/hr.
r/IndustrialMaintenance • u/Life_Net5004 • 3h ago
How are Tempsens thermocouples evaluated for high-temperature industrial applications?
Thermocouple selection for high-temperature industrial processes depends on factors such as operating range, thermocouple type, sheath material and exposure to harsh process conditions.
Tempsens manufactures industrial thermocouples for applications involving furnaces, heat treatment and metal processing. For engineers evaluating temperature sensors for these environments, which technical specifications and performance factors matter most when choosing a thermocouple?
r/IndustrialMaintenance • u/Senior-Age-6701 • 6h ago
Question Uniforms
Do you guys get uniforms from your place of work?
It’s a bit weird, and I probably shouldn’t complain, but we get a fresh set of clean uniforms every day. Blue pants with side pockets and a blue button-up shirt with two chest pockets.
Now, I know I shouldn’t complain, but I hate wearing the button-up shirt. I genuinely think it’s not a good look on me, and it’s bothering me. 😆 I also generally hate button-up shirts and never wear them outside of work. I just feel weird wearing them.
Just venting, LOL. Would love to read some comments to help pass the time. 😎
r/IndustrialMaintenance • u/Firm_Safe7495 • 1d ago
Our drive obsolescence list was three years out of date and nobody owned it
r/IndustrialMaintenance • u/breensy • 1d ago
Work pictures
My phones camera roll is constantly flooded with work pictures for future reference. Has anyone found a way to easily split work pictures from personal, without manually moving each picture to different folder?
r/IndustrialMaintenance • u/Salty-Zombie-680 • 2d ago
Yankee Bearing
Vibe analysis was showing BPFO. Teardown confirmed the defect in the outer race.
r/IndustrialMaintenance • u/Mmhf22 • 1d ago
Has anyone seen this part?
Hi guys was wondering if anyone has ever seen this part? We are going through inventory. Came in from a refinery with many pump and valve parts. I don’t believe it’s a thermowell. Anything helps, but trying to figure out who makes it and what it goes on. Thank you!
r/IndustrialMaintenance • u/Beneficial_Recipe852 • 19h ago
Built an AI assistant that turns equipment manuals and SOPs into QR-code-accessible support — looking for manufacturing teams to try it
Hey everyone!
We're a small team of engineers and AI developers with years of experience in manufacturing. We've recently built Twiin (https://hellotwiin.com), a tool designed to make technical documentation easier to access, right where it's needed.
Here's how it works:
- Upload your equipment manuals, SOPs, troubleshooting guides, or training materials.
- Twiin turns them into a customized AI assistant in minutes.
- Generate a QR code and attach it directly to your equipment.
- Operators, technicians, or customers scan the code and ask questions in plain English.
Instead of digging through hundreds of pages of manuals or searching shared folders, users can quickly find answers based on your existing documentation.
Potential use cases:
- Equipment manufacturers: Offer customers 24/7 self-service access to equipment information.
- Maintenance teams: Find troubleshooting guides and maintenance procedures faster.
- Production operators: Access machine-specific SOPs and operating instructions.
- Training teams: Help new operators and technicians learn equipment more efficiently.
We're looking for a few manufacturing teams or equipment OEMs to pilot Twiin for free.
We'd love to see how it performs with real-world technical documentation and get feedback from people who actually work with this equipment.
If you're interested, visit https://hellotwiin.com or send me a DM. We'd be happy to help set up a pilot with one of your machines or equipment manuals.
Thanks! Looking forward to hearing your thoughts.
r/IndustrialMaintenance • u/BeforeLifer • 2d ago
Question Pipe threader keeps shearing pipe mid cut.
I’m trying to thread some 1-1/2” pipe and this just happened to me, 1-2 threads to go and it just ripped the already cut ones right off, I had the pipe soaked in the cutting oil and was reapplying every half turn, cleared the chips right before this too.
I don’t have a proper pipe vice so I’m making do with a regular one with the far end of the pipe held up level with the gantry crane, the end I’m cutting is sticking out only 1-2” extra from full die engagement.
This has happened before with my same setup but most of my cuts (with new pipe) work just fine, this piece of pipe has been in service (cold water) for years at this point and I’m cutting off the worn out leaking grove end to put an adapter on it.
Is this a material failure or an issue with my setup?
r/IndustrialMaintenance • u/kelseymachine • 2d ago
These kind of machine blow
Sullivan palatek air-end overhaul rebuilt and ready for service
r/IndustrialMaintenance • u/jellynopeanutbutter • 1d ago
Question 25M in AZ - Blew a great Equipment Tech job due to attendance, but it helped me realize I want a career in industrial maintenance/automation. Advice on next steps?
I'm 25 and trying to figure out how to turn my manufacturing background into a real long-term career.
I worked as a machine operator from 2020-2022, and then again from Feb 2025-Feb 2026 in solar manufacturing.
Because I had a good work ethic and understood the machines, the maintenance team vouched for me, and I got promoted to Equipment Technician ($22 to $29/hr) with zero prior maintenance experience.
I originally just chased the pay bump, and sadly, I was dumb and got fired in October for pointing out on attendance. I regret it massively.
I hated the monotony of being an operator, but as a tech, l loved shadowing senior guys, doing PMs, swapping parts, tweaking PLCs, and the satisfaction of troubleshooting a broken machine until it ran again.
I have an unused marketing certificate from community college, so I'm basically starting my career path from scratch. My long-term goal is to grind in hands-on maintenance/controls for a few years, then transition into something less physically demanding as I get older (like traveling field service, controls/SCADA, or an office/hybrid technical role).
How should I explain my firing when applying to new technician roles or apprenticeships?
What apprenticeships or entry-level roles (Mechatronics, Robotics, Controls, Low Voltage) should | target?
Would getting an Associate's degree at my local community college help me stand out and reach those less-physical roles faster?
Appreciate any guidance!
r/IndustrialMaintenance • u/Cavalao_da_Noite • 2d ago
Question Does anyone knows what is this called?
We use a NJP-2500 and this is used to make the holes where the pills exit the machine smaller. I don't know what this is called or where to buy it. Tried sending an email to a manufacturer but it has been a few days of no response. I would be really grateful for any help. Sorry for any mistakes, english is not my first language
r/IndustrialMaintenance • u/Sphinctersayswhat • 2d ago
Question Why motor cook?
This was a rotary vane vacuum pump. Ran at 480V 60Hz. Six identical setups in this machine plus several other similar machines for over 20 years. Main disconnect> fuse block>contactor >overload>motor. The overloads were set high at 4A and it was fused at 4A(not sure the type of fuse that was on it and won't know till tomorrow if ever) prints say 3A. The Vanes failed at end of life and locked up the motor which is common but the overload didn't save the motor(which is not) and the fuses are still alive as well.
The big brother to this guy(Same brand and style) is rated at 2.3A at 480V and I've measured them at 29A rotor locked.
Obviously we need to set our overloads correctly and keep hands out of cabinets. I'm just not understanding how this motor got this cooked so any thoughts are welcome.
r/IndustrialMaintenance • u/usual_trail2 • 2d ago
Maintenance How are you setting check intervals on production nutrunners?
The 12-month or 5000-cycle interval everybody quotes for torque tools comes from ISO 6789.
That standard is written for hand tools like click wrenches, and it even lets a company’s own procedure take precedence. On a production nutrunner the cycle part is kinda meaningless. Six bolts a unit at 60 units an hour is 360 rundowns an hour, so 5000 goes by in about 14 hours.
ISO 5393 doesn’t help with the schedule either. It’s a test method for power tools on simulated joints, so the interval ends up being the plant’s call, and that usually means a calendar interval, a rundown count, or regular Cmk checks on a joint simulator with the interval shortened or stretched depending on the results. That last one is the most thorough and eats the most simulator time.
Calendar is the easiest to defend in an audit and the least tied to how hard a tool actually works. Counting rundowns gets closer, and the number is usually sitting in the controller already since every result gets logged anyway. Cordless tools that move between stations make that messier, because the count has to follow the tool and not the station. The logs themselves usually hold a lot more than a tally, though. The TCS.2000 that runs Leetx’s corded tools can store the tightening curve with each result.
What still doesn’t sit right about going by count is that a rundown at 20% of a tool’s rated torque and one near its max both add one to the same counter. The load on the gearbox and transducer is nowhere near the same, and the torque for every rundown is right there in the log.
r/IndustrialMaintenance • u/PhaseTechnologies • 2d ago
Question Anyone using remote monitoring for their equipment?
Curious how many people are using some kind of remote monitoring for their equipment. Being able to check equipment status or troubleshoot issues without physically being on-site sounds like a dream...but how well does it actually work?
For anyone using it, what's been the biggest benefit? How about cost? What did you pay upfront for hardware and setup and are there ongoing subscriptions or software fees? Did you ever have any problems with connectivity issues or anything?
r/IndustrialMaintenance • u/Few-Papaya-2341 • 2d ago
I injured my fingers at work, and nobody cares. Need to get out, looking for electrical bias / multi-skilled roles (open to relocate)
Hi all, this is my third post here this week, sorry. Things have got worse.
Yesterday I badly injured my fingers at work (pic attached). I can’t bend them properly. Nobody at work really cared, and they’ve only given me one day off. They expect me back tomorrow, but I genuinely can’t use my hand properly.
I’m honestly scared now. One of our production supervisors lost half his pinky finger at this same place, and all he got was a few days off. Seeing that, and now this happening to me, I don’t feel safe there at all. Safety isn’t taken seriously, LOTO isn’t followed, and management only cares about output.
For anyone who didn’t see my other posts: I work 5 days a week, with a minimum of 8.5-hour shifts, and some days I end up doing more than 5 hours of OT for a day and never get paid. There are only 5 engineers on site, and one is on permanent nights, so 4 of us cover 2 shifts, 7 days a week. I’m always tired, and I never switch off.
So I’m done. I’m looking for a new job as soon as possible:
- Preferably an FMCG or warehouse environment
- Multi-skilled engineer (electrical bias) or electrical engineer
- BEng Electrical & Electronics, MSc Robotics, PLC experience
- 4 on 4 off or Panama, days or nights, I don’t mind
- Happy to relocate anywhere in the UK
I just want a safe place to work and some peace and work-life balance.
If your site is hiring or you know a good company that actually looks after its engineers, please let me know or DM me. Any advice appreciated.
Thanks.