r/IsaacSim • u/MemestonkLiveBot • 2h ago
Showcase Shepherding controller on a differential-drive robot in Isaac Sim 6.0: herding 6 cats into a pen (3x speed)
4
Upvotes
Disclosure: this is a robot my team is building, imported from our prototype CAD. Everything here is simulation, not real footage. Mostly posting because the shepherding part turned out to be a fun controls problem.
Setup:
- Isaac Sim 6.0, headless, PhysX at 250 Hz, rendered at 25 fps. The video is sped up 3x and has music added.
- Robot: a full articulation with a two-wheel differential-drive base and a rear ball caster (about 26 kg). The controller outputs (vx, wz), which go straight to the two wheel velocity drives, so there’s no lateral motion. It has to turn toward its path before it drives.
- Controller: based on Strömbom et al. 2014, “Solving the shepherding problem”. It has two modes. COLLECT gets behind a straggler and pushes it back to the group. DRIVE gets behind the group and pushes it toward the gate through a staging point. The approach path bends around the flock so the robot doesn’t scatter it. Max speed is 1.2 m/s; the real prototype runs much slower today.
- Cats: kinematic agents running a small flocking model. They wander, flee when the robot is close, keep apart from each other with weak cohesion, avoid walls, and settle at the food bowl once inside the pen. The meshes are 4 CC-BY models from Sketchfab, used for 6 cats. There’s no rig, so they slide, with a small bob added.
- Scene: CC0 grass from Poly Haven, a picket fence built from one PointInstancer with box colliders, and the stock Isaac HDRI and vegetation.