r/LEGOtrains • • 8h ago

Diesel Bricklink Railroad Locomotive Unit A & B

Thumbnail
gallery
313 Upvotes

Detail on this set is incredible, especially with the circular part of the livery. Highly recommend getting two sets and building the Unit B. Going tine such an eye catching display piece!


r/LEGOtrains • • 7h ago

Layout East Studlands Gateway LEGO container terminal

Thumbnail
gallery
178 Upvotes

East Studlands Gateway made its first debut at Shildon Brick Show at the weekend as part of the LUKR northern club layout. I’ve had a LEGO container yard on my list for years, and was finally inspired to build it after seeing the driveable truck cabs by Ts on Rebrickable. This meant we could have a container train come in, be unloaded by crane, and driven off on a truck (which all just about worked by the Sunday of the show…updates coming for Bricktastic!).

The module features running lines for connection to other club modules, and two sidings with a headshunt allowing us to run locomotives round as well as by loco release. We use kadee couplers from BMR on the wagons to allow us to have the locomotive detach from the train over magnets in given spots.

The module is deeper than our usual modules, at 1.5m depth, and this is to allow for a full loop of road for the container trucks to turn and complete the loop. An absolute pain and huge investment in parts, but now it’s built I’m happy we did it!

The corner module (didn’t manage to get any photos yet!) is a housing development construction site with motorised digger and workman. It encompasses the pointwork from the mainlines to the container terminal, and ended up being a really good, space efficient way of doing this.

We had around 50 containers (mixed between 20 and 40ft versions) for the show. The containers were inspired by the Open L Gauge instructions, but heavily redesigned by Henry for our needs.

A big thanks to Henry for the crane and a lot of other tasks, to Shane, Mark, Roan and John for contributing containers, and to Lewis for his rebuilt class 66 which performed really well. This module will be appearing at Bricktastic in Manchester next year, with an additional 2 metres of length.

You can read a bit more behind the scenes stuff on my latest blog post.


r/LEGOtrains • • 1h ago

Electric Loco ACELA & Blue Line Railroad

Thumbnail
gallery
• Upvotes

So far my favorite train builds


r/LEGOtrains • • 5h ago

My recolor of the Bricklink Railroad Locomotive into the Super Chief, with A and B Units

Thumbnail
gallery
50 Upvotes

One of my favorite locomotive since playing with a full consist of one on my dad's model train set when I was younger. Reverse engineered from instructions for the A unit, then modified into the B unit using the teaser images before those instructions were released. All pieces were on Pick a Brick in the correct colors when I was building the locomotives.


r/LEGOtrains • • 3h ago

What a great set. Having a lot of fun.

Thumbnail
gallery
17 Upvotes

Minor mod to show some activity on 910066 F unit. Just some spare parts already in the set.


r/LEGOtrains • • 1d ago

Underground DC Metro Station

Post image
470 Upvotes

r/LEGOtrains • • 21h ago

Big Boy on the run

218 Upvotes

My big boy model running for the first time in public at the OKC train show


r/LEGOtrains • • 12h ago

• Tried running my Powered Up Arctic train along a fallen mossy log in Sydney bushland—the S-curve and uneven bark had other plans.•

20 Upvotes

r/LEGOtrains • • 23h ago

BDP Old Engine Shed Extension

Thumbnail
gallery
90 Upvotes

I liked the original look of the old train shed, but there were some things I wasn't so keen on: the extra siding which couldn't properly align with track switches, only being long enough for a City sized engine, and even then, there wasn't much room for things 8 studs or wider.

This shed has been widened for a 10 stud clearance, 12 being the max door width. Inside, it stretches a little over three rail pieces worth in length. The siding wasn't needed, so that's gone. Though I held on to the rear shack and side yard details, except for the fence.

The base plates used are two 24 x 32 rounded corner plates, fairly common among really old sets. I almost considered removing the lathe, but instead I just rebuilt it to partially go into the wall at the very end. It's extremely close, but my western engine can fit fully inside, both directions.

Overall, I'm pretty satisfied.


r/LEGOtrains • • 1d ago

Diesel Choose a tiny tweak for Santa Fe Super Chief 10020

Thumbnail
gallery
77 Upvotes

I have an original 10020 Super Chief and it's great but literally since I was a child the gap in the way Lego handled the curve on the "cheek" of the cab has bothered me. It was the best that you could do with 2002 bricks but I am considering tweaking mine to make a better integrated curve.

Which option do you like more?

Maybe your answer is to keep it as it is, but y'know...my toys my rules I guess.

Option 2 is more like the current Bricklink locomotive does with a similar 3x3 curve. I think Option 1 looks a tiny bit "friendlier" although the curve does not match perfectly.

...

Thanks to Rebrickable user Galaxy 12 Imports for posting the .io file here..


r/LEGOtrains • • 1d ago

Ayo

Post image
44 Upvotes

r/LEGOtrains • • 1d ago

Steam 2-6-4 T Fictional Mixed Freight Steam Locomotive MOC

Thumbnail
gallery
70 Upvotes

Just finished this project I have been working for the past few weeks, my 2-6-4 T mixed freight steam locomotive. The locomotive is powered by a single L PU Motor in the boiler and the battery box is in the tender, in theory it should be able to handle R40 curves but we shall see. Overall I am very happy with how this turned out, it was a very fun and challenging build as there was very little room to accomoadate for the motor and battery. I will add more complex valve gear once I build it in person, as the current design accounts for it. I took a lot of inspiration from the CNJ 4-6-4 T locomotive for this design. Ideally this locomotive will be my main passenger train when I do start building my own layout or for when I go to train shows.


r/LEGOtrains • • 1d ago

BDP BDP F7 can be recolored into the Super Chief

Thumbnail
imgur.com
45 Upvotes

r/LEGOtrains • • 23h ago

Wiring up directional headlights/taillights for my 6-wide TEE VT 11.5 – controlled by two synced Mould King M-0006 hubs

Post image
9 Upvotes

r/LEGOtrains • • 1d ago

MOC RC Articulated Locomotive

Thumbnail gallery
9 Upvotes

r/LEGOtrains • • 1d ago

Discussion I had a funny thought about the upcoming train set.

Thumbnail
gallery
140 Upvotes

The number on the side of the Vintage Steam Train is the same number on the original MOT trains, so I can't help but consider the possibility that the upcoming High-Speed Electric Passenger Train could have a reference to the Metroliner.

Especially since the real-life Metroliner was, by some technicalities and standards, a high-speed electric passenger train service.

Not that the LEGO Metroliner really looked like a real Metroliner, but the American idea was there.


r/LEGOtrains • • 1d ago

Rolling Stock 40ft Colgate intermodal

Thumbnail
gallery
110 Upvotes

I have a Lego themed bathroom and I made this moc of a 40ft container on a flat bed to hold my family's toothbrushes (ok..not all the family just mine and the kids :) ) custom vinyl on my cricut. Attached to the wall next to sink Thought you'd appreciate it.


r/LEGOtrains • • 1d ago

BDP It's built

Thumbnail
gallery
137 Upvotes

So I have finished the main build for the Brick Railroad Locomotive and I'm now waiting on the large motors and a restock on the hub I added both road name stickers to it so all I have to do is. Dig down and reverse them


r/LEGOtrains • • 1d ago

Passenger D&RGW/ D&S Alamosa Car Moc

Thumbnail
gallery
90 Upvotes

Pretty much my first crack at train moc building - but heavily influenced by some cool techniques I found online. I haven't seen a ton of D&RGW equipment in Lego narrow gauge, but I think to get the correct look you do have to do proper narrow gauge. Shout out to the internet for making all these techniques so accessible!

Started off with the Alamosa parlor car. I think I got pretty close to the prototype on this one.

Working on basically just building as much D&RGW rolling stock as I can and then hopefully I'll do some locomotives and such down the line. Really wanna try #20 and some of the WPY diesels that the Durango and Silverton has been running as I don't think I've seen anyone do those justice yet!


r/LEGOtrains • • 1d ago

Brick Railroad locomotive and ( Blockjunction ) LNER A4 “Mallard”

Thumbnail
gallery
62 Upvotes

No layout for now 🫤


r/LEGOtrains • • 2d ago

ALCO Century Series

Thumbnail
gallery
175 Upvotes

I'm working on instructions for both the C424 and C420


r/LEGOtrains • • 1d ago

ES44AC Looking for Feedback

Post image
55 Upvotes

I've been working on this on an off for a few years and was just wanting feedback on what looks right, what looks wrong or could be reworked, proportion issues, or suggestions on things that are missing, etc. I did my best to represent everything as accurately as possible. I'm terrible at using the render feature in Studio so please excuse the bad lighting. If anyone has suggestions on render settings let me know.


r/LEGOtrains • • 1d ago

LEGO IDEAS - Update Video #3 - Locomotive Roundhouse w/ Motorized Turntable

26 Upvotes

Vote here to make this roundhouse a reality: https://ideas.lego.com/product-ideas/fb1733e1-27d6-4192-9349-1138176a6c93

00:00 Introduction
00:24 What is Lego Ideas?
01:19 Combine Multiple Sets
02:05 Stickers v. Printed
02:40 Extra Exterior Detail
03:08 Alternative Build
03:43 BlueBrixx
04:16 Lego Train Community
04:52 Outro


r/LEGOtrains • • 1d ago

MOC Opinions needed on moc

Thumbnail
gallery
14 Upvotes

(Full disclosure, grown man here with limited building skills and pieces, working with what i got)

i've been working on a sort of a one size fits all train car inspired by the 4559 cargo railway set; The idea is that with only so many train wheels, there's a limited number of train cars i can build, so i wanted one that serves any purpose. Placing in the cargo containers (same dimensions as the containers the cargo trains come with nowadays) gives the impression of one singular unit, especially if the paintjob lines up. Different containers gives it a different role like cargo hauler, passenger train, maintenance car (i was thinking of building a double container length crane platform).

THE QUESTION:

cant decide how to build the ends; i want both ends to be the same, i built these with alternating versions so i could pair them up for photos

version A: simply rounded off the end; the white section is meant to imply doors to allow crossing between cars? maybe? also there's a lot of space on the sides, i was thinking of hollowing it out so smaller containers could be slid in or something, like on the 4559 train again

version B: basically a cab so it can be driven even if the locomotive is on the other end. Bit inelegant design, but i do prefer more blocky looks, and i am proud i was able to pull off the side windows. Only problem is that i dont have any more of the center window, all i can do is substitute it with stacking 6 transparent plates like i did on the left one. Not sure if this vibes with the rest of the car though, dont really like the idea of that much autonomy (especially with cabs on both ends; and the car itself is not meant to be "motorized", just features cabs), and i can reuse the window design on a future loco anyway

Which one should i go with? or should i go with something else altogether? (either way im keeping the arrowhead roof design)


r/LEGOtrains • • 1d ago

A closer look at the Azure Allure. My custom climax loco!

Thumbnail gallery
14 Upvotes