r/LegoDisplay • • 18h ago

Children in the 90s did not have TikTok - but they had Lego catalogs!

Thumbnail
gallery
38 Upvotes

r/LegoDisplay • • 1h ago

Display Case Suggestions

Thumbnail
• Upvotes

r/LegoDisplay • • 16h ago

Display cases I bought on KGBox

Thumbnail gallery
6 Upvotes

r/LegoDisplay • • 20h ago

Pirates Imperial Armada under attack!

Thumbnail
gallery
8 Upvotes

1996 sets


r/LegoDisplay • • 1d ago

My 90s lego sets installation. Volcano 🌋 is a humidifier under the plastic shape 🤣

Thumbnail
gallery
28 Upvotes

r/LegoDisplay • • 1d ago

Lego box

4 Upvotes

Does anyone know of a good acrylic box big enough to fit the Great Deku Tree set? I have a child on the way and I’d like to keep it in good condition until I can make time to build it.


r/LegoDisplay • • 3d ago

Speed Champions Movie Garage Displays

Thumbnail
gallery
500 Upvotes

I made some more custom garages to display Speed Champions cars, these ones are movie inspired.

If anyone is interested, instructions are available on Rebrickable.


r/LegoDisplay • • 2d ago

Lego Indiana Jones: The Original Adventures Roster: Major Toht 28/83

Thumbnail
youtube.com
2 Upvotes

r/LegoDisplay • • 2d ago

Sometimes you don't need an expensive wall mount

Post image
15 Upvotes

r/LegoDisplay • • 3d ago

The facehugger adds a nice touch to the living room wall.

Post image
21 Upvotes

r/LegoDisplay • • 3d ago

Star Wars New addition to the display, retired set: Ghost II

Thumbnail
gallery
17 Upvotes

I tend to buy sets when I find a deal, but my building time doesn’t keep up with my buying. The result is a bit of a backlog!

Finally broke into one I’d wanted for ages: the Ghost & Phantom II (75357) from Rebels/Ahsoka. It retired before I’d even watched either show, so I was lucky to find a BNIB one for less than the original RRP.

It’s such a cool set, and nice to build a bigger Star Wars ship that isn’t a Falcon! It’s solid and properly swooshable, so it’s more than a display piece, and the Phantom II docking into the back is a great touch. Ironically it’s more fun to handle than the UCS Falcon, which is beyond delicate.

For now it has a temporary spot on the main display, but it’ll eventually be wall mounted between the Dark Falcon and its regular counterpart, 75257 on a different wall, creating a separate display.

I would like to update it with the characters from Rebels rather than from Ahsoka, but its a small detail.

Thats it, wanted to post as I was excited to get into my backlog and to show not everyone buys sets to leave them boxed up and does eventually get them built when life allows!


r/LegoDisplay • • 3d ago

HOWZ YOUR LUCK !!

Thumbnail
gallery
21 Upvotes

I decided today, I would put some power, to my new minifigures cabinet. My intention was to drill straight through wall into garage and do all wiring, isolation in there.

So went in garage to try and find break through, eventually after a while searching, I find this what do you reacon ?.


r/LegoDisplay • • 3d ago

Marvel How to display minifig on monitor

Post image
1 Upvotes

I want to display my Lego doctor doom figure on top of my monitor I just don’t have the creativity to figure out how


r/LegoDisplay • • 3d ago

Harry Potter Shelf or table to display 2021+ modular Hogwarts?

0 Upvotes

I just moved and am looking for a better solution to display the castle. I was using the top of an IKEA Kallax shelf but after the great hall, hospital wing, owelry and boathouse I was already pushing it on space. I have the east wing and hagrids hut ready to build but want to find somewhere to fit it all before starting to build, is there anything that is recommended currently?

Thank you in advance!


r/LegoDisplay • • 4d ago

Marvel Which Iron Man display looks the best? 1 big shelf/3 small shelfs/ one big MOC?

Thumbnail
gallery
31 Upvotes

the moc is still work in progress and is inspired by this awesome moc by Flying Imagination


r/LegoDisplay • • 3d ago

Modular wall mount

1 Upvotes

I would like to mount some of my sets to the wall, but also like to rotate the sets so I do not have the same set displayed all the time.

I was thinking of a modular wall mount, where the part attached to the wall stays in place, but the set-specific mounting component can be swapped out—allowing you to rotate between different sets (sets of roughly the same size, of course). Does anyone know if something like this already exists?


r/LegoDisplay • • 5d ago

Finished Display

Post image
85 Upvotes

r/LegoDisplay • • 4d ago

Lights! Updated my office setup a couple weeks ago.

Thumbnail
gallery
61 Upvotes

r/LegoDisplay • • 6d ago

Modular I designed a custom 12-foot LEGO city mat, printed it on neoprene, and finally finished my modular city display!

Thumbnail
gallery
244 Upvotes

I've been collecting LEGO modular buildings for years, and I love arranging them on a table like a city.

I had a table measuring approximately 4 feet by 12 feet, and wanted to create a proper city to display everything.

The problem was that I didn't want the typical arrangement of buildings sitting on green baseplates, with roads surrounding every building. I wanted something that felt more like an actual city, with continuous blocks of buildings, a few sensible streets, landscaped sidewalks, parks, and a waterfront.

I also wanted to leave room for future modulars without having a bunch of empty green spaces making the city look unfinished. People recommended MILS as a solution but that would be extremely expensive.

My solution was to design an entire LEGO-style city as a custom-printed mat.

The idea was to assign every building a specific location, then design individual parks and plazas underneath those locations. As my collection grows, I can simply place new buildings over the printed scenery. Until then, the empty spaces still look like intentional parts of the city.

I ended up designing approximately 25 individual scenes, including a skate park, basketball court, playground, food-truck plaza, various gardens, and a Washington Square-inspired park.

At one end, I created an entire waterfront with a beach, lighthouse, bridges, docks, boats, and landscaped walking paths.

Then came the AI adventure.

I started with ChatGPT to help plan the geometry, calculate the dimensions, and design the individual scenes.

Unfortunately, its native image generator had two rather significant problems:

  1. Geometry. LEGO studs have a specific spacing, and every 32×32-stud section needed to align precisely with its neighbors. Roads, sidewalks, intersections, and building footprints all had to match. ChatGPT could create some beautiful artwork, but repeatedly ignored the actual geometry.
  2. Resolution. I needed the final artwork prepared at 300 DPI at the full physical dimensions of the table. That's approximately 43,500 × 14,550 pixels. The native image generator wasn't able to reliably deliver the resolution and precision I needed for printing.

I eventually switched to Higgsfield AI for the artwork, while continuing to use ChatGPT for planning, calculations, and organizing the individual components.

Higgsfield proved much better suited to the image-generation work, although it still took an enormous amount of iteration to get everything looking right.

Rather than asking AI to generate one enormous city, I worked on individual sections, refined them, and assembled everything into the complete layout.

There were countless revisions, corrections, and arguments with AI about what exactly constitutes 32 LEGO studs.

The printing was another interesting part of the process.

My original plan was to print everything on adhesive vinyl and attach it directly to the tabletop.

After researching the options, however, I switched to neoprene, essentially creating an enormous custom playmat.

The costs were surprisingly similar, and neoprene seemed like the better solution. It's removable, doesn't require permanently adhering anything to the table, and provides a nice surface for displaying the LEGO sets.

A special shout-out to Rollinmats, who handled the printing.

The final artwork was an absolutely enormous file, and they were great about working with it. More importantly, their first print came out blurry, and rather than simply shipping it, they noticed the problem themselves and reprinted the entire thing before sending it to me.

I really appreciated that attention to quality, especially on a project this large.

And now it's finally finished!

I've included a bunch of photos showing the design, some of the individual scenes and details, the completed mat before adding any buildings, and the final city populated with my LEGO collection.

All the roads, sidewalks, parks, beach, waterfront, and little decorative details on the mat are printed artwork. The modular buildings and other LEGO sets are the real thing.

The intention was never to replace building with LEGO. It was to create a detailed, cohesive foundation for displaying my collection without having to build thousands of square inches of landscaping out of bricks.

And because the parks sit underneath the buildings, the city can continue evolving as new modulars are released.

What started as a simple idea to organize my LEGO collection turned into a surprisingly elaborate exercise in urban planning, graphic design, print production, and discovering that AI has a remarkably casual relationship with mathematics.

But after all the iterations, it's finally done, and I'm really pleased with how it turned out.

Now I just need LEGO to keep releasing modulars so I can fill the rest of it!


r/LegoDisplay • • 6d ago

Star Wars Advice for displaying UCS Venator

Thumbnail
gallery
5 Upvotes

Hello, I just finished building the amazing UCS Venator and tried to display it on top of my wardrobe, the only feasible place in my room. It fits, but I'm not satisfied about HOW it's displayed. I feel like it would be better if it's angled down diagonally. Would that be possible? Anybody have any ideas on how to pull this off? Thanks!


r/LegoDisplay • • 7d ago

Newbie building Lego sets

Thumbnail gallery
11 Upvotes

r/LegoDisplay • • 8d ago

My Lego display.

Post image
3 Upvotes

r/LegoDisplay • • 9d ago

The Fellowship of the Ring

8 Upvotes

Trying to hit all the plot points of the first film with a combination of sets Mocs and my own work.


r/LegoDisplay • • 8d ago

Dark Falcon owners, I have a quick measurement/display question for you!

1 Upvotes

I have not built this set yet, but I plan to at some point. The only place that I have for display are the two shelves above my desk which are about 12 inches deep.

I don't care if the ship overhangs the shelf, that actually might be kind cool, but can I be sure that all the landing gear will be on the shelf for maximum support and weight distribution?

Here is the shelf area in question:

![img](94n05mwa8h0i1)


r/LegoDisplay • • 10d ago

Cars Project update on my rotating display for Speed Champions cars!

Thumbnail
gallery
119 Upvotes

A little update on a project I've been working on!

I've finally got my 3D-printed Carousel Lift working and finished enough to share. It's a manually operated rotating display designed to hold up to 8 model cars, and I think the Speed Champions F1 cars look pretty good on it!

The whole mechanism is almost entirely 3D printed, with over 700 individual parts. Getting everything to move smoothly and reliably took quite a bit of trial and error.

Would love to know what you think! Especially curious if you'd use something like this to display your own LEGO car collection.

The project has now launched on MakerWorld, so if you're interested in building one yourself, you can find it here:

https://makerworld.com/nl/crowdfunding/396-carousel-lift-3d-printed-car-display