r/Lighting • • 2h ago

Need Design Advise Installing an Emitever 5-in-1 LED driver located under a built-in desk……. How would you get 120V to the driver?

Post image
2 Upvotes

The driver has metal knockouts and is intended for hardwiring to 120V electrical. Is there a stander solution here?


r/Lighting • • 20m ago

Product Review Lutron Caseta ELV+ Dimmer Performace Disappointment

1 Upvotes

I went ahead and bought a Lutron PD-5NE ELV+ which allows my DMF M series to dim down to 1% compared to the original cheaper Caseta Dimmer (no neutral required) which only could dim down to 5%.

My setup is four 4" DMF recessed dim to warm lights (M series/Artafex).

For double the price on the ELV+, the dimming performance was so subtle for the extra cost.

I was expecting the transformation to be huge and dim to the faintness light like a night light.

I made sure the PD-5NE is installed with neutral and set to reverse phased(it is the default setting but I double checked).

To put things in perspective, the normal Caseta dimmer I would score 80 and the ELV+, would be like a 85, which means double the price for such subtle performance.

IMO, unless you have 8+ lights on this ELV+ dimmer it wouldn't matter too much. Unless you have some noise or flickering issue which I don't have on either dimmers.

Please enlighten me if I am missing something.


r/Lighting • • 24m ago

Need Design Advise Suggestions on Recessed Lights and Grow Lights for Ceiling Near a Kitchen Window

1 Upvotes

My kitchen has a 6-ft wide window along one wall. The ceiling, which is slanted, makes a step there because of the slope of the roof. There is a horizontal section of ceiling along that window that's about 8 ft long by less than 2 ft wide. I grow plants there especially in winter, but I can't hang anything because they didn't put any rafters across the width of the section, so I have to use molly bolts instead of screwing into wood. So I plan to rip out that section of ceiling, put in some framing across the gap, and re-drywall. While I'm in there I'd like to install some accent lighting, and maybe some grow lights. I haven't bought a light fixture since the days of high intensity halogen so I'm not up on current products.

For the accent lights, I want one with bulbs I can change rather than a fixture that has to be thrown out when it fails. I guess a low-profile recessed fixture is what I need? And if it's dimmable that would be even better. Maybe put them every 2 ft along that 8-9 ft space?

For the grow lights, I thought about a couple of 4-ft LED strips of some kind.

Any suggestions or product recommendations?


r/Lighting • • 2h ago

Product Review My absolute saviour dealing with icicle lights partial outages.

Thumbnail gallery
1 Upvotes

r/Lighting • • 4h ago

Lighting Control Specific bulb type I'm trying to find for sconce

Post image
1 Upvotes

I am looking for a bulb that is not hard wired for a sconce that has a remote. I am wanting to put two identical ones on each side of a bed. The issue is that these kinds the remote controls both at the same time. I want to be able to control just one at a time so if one person wants their sconce off or on it doesn't change the other sconce. Any suggestions?


r/Lighting • • 5h ago

Need Design Advise Lighting Up Art Piece

Post image
1 Upvotes

Hey I have this art piece hung in my downstairs bathroom and I'd like to find a way to light it up in a battery powered way if possible? Can someone suggest what I should buy? Should I light it up from the top or the bottom? I just want it to look good when the lights are off. Is it possible to have the light turn on only when the lighting is dark?


r/Lighting • • 7h ago

Need Design Advise Light Fixture

Post image
1 Upvotes

Here is my current set up I need to change out the grey toned light fixture. Nothing modern or too busy. What would you suggest. I was thinking a rattan dome but I have no idea so any suggestions would be great thanks


r/Lighting • • 11h ago

Need Design Advise we need help: Would you fit front-only IP65 downlights under soffits?

Thumbnail
gallery
2 Upvotes

comparing downlights for a covered outdoor area. Quite a few say IP65, then further down the spec it turns out that only applies to the face. Rear is IP20.

Can why that works indoors. Under soffits, would you be happy with that if the space behind stays dry? Being under cover doesn’t always keep the rain out when it’s blowing sideways.

The Aone DL190G caught my eye because they list the whole fitting as IP65, front and rear. Connections still need protecting separately though, so that rating doesn’t cover everything once it’s wired up.

Trying to work out whether whole-fitting IP65 is worth making a requirement here, or whether I’m overthinking it with the rear tucked away.

On jobs you’ve gone back to, where’s water actually got in? Around the face, through the back, or at the connections?


r/Lighting • • 8h ago

Lighting Control Architectural Lighting Design: Transforming Residential, Commercial & Hospitality Spaces

Post image
0 Upvotes

Lighting is one of the most critical components in today's building architecture and interior design. The right lighting design can change the appearance of an ordinary space into something that looks good, is functional and is comfortable to use. Whether it's a luxurious home, commercial facility, hotel, restaurant, or corporate office, architectural lighting is a key element in elevating the experience of any space.

Founded in 2008, LightBook is an international architectural lighting design consultancy. LightBook's work spans from India to the Middle East to the UK, bringing creative thinking, technology and innovative lighting solutions together to create inspiring lighting environments.

What Is Architectural Lighting Design?

Architectural lighting design is the professional process of planning and integrating artificial and natural light into buildings and interior spaces. It focuses on enhancing architectural features, improving functionality, creating atmosphere, and supporting energy efficiency.

Professional lighting designers consider several factors, including building architecture, interior materials, lighting levels, colour temperature, fixture selection, glare control, and lighting automation.

A well-planned lighting scheme creates a seamless relationship between architecture, interiors, and the people using the space.

Why Hire Professional Lighting Design Consultants?

Hiring experienced lighting design consultants helps architects, developers, interior designers, and property owners achieve better lighting results.

Professional lighting consultants provide creative concepts and technical solutions according to the project's requirements, functionality, and budget.

The major benefits include:

  • Enhancing architectural beauty and interior aesthetics.
  • Creating comfortable and functional lighting environments.
  • Improving energy efficiency through modern lighting technology.
  • Highlighting building façades, materials, and textures.
  • Reducing unnecessary lighting and maintenance costs.
  • Integrating intelligent lighting controls and automation.

A professional lighting design approach ensures that every lighting element contributes to the overall architectural vision.

Residential Lighting Design for Modern Homes

Residential lighting design is essential for creating comfortable, welcoming, and visually balanced living environments. Different areas of a home require different lighting approaches.

Living rooms benefit from layered lighting, combining ambient, accent, and decorative illumination. Bedrooms require relaxing lighting arrangements, while kitchens and workspaces need functional task lighting.

For luxury residences, villas, apartments, and farmhouses, architectural lighting can highlight interior features, artwork, landscape elements, and exterior façades.

LightBook develops creative residential lighting concepts that complement architectural styles and enhance everyday living experiences.

Hospitality Lighting Design for Hotels and Restaurants

Lighting plays a significant role in the hospitality industry. Hotels, resorts, restaurants, lounges, and cafés require carefully planned illumination to create memorable guest experiences.

Warm lighting can establish a welcoming atmosphere in restaurants, while architectural lighting can give hotel entrances and lobbies a distinctive identity.

Professional hospitality lighting design considers guest comfort, visual appearance, operational requirements, and energy efficiency.

LightBook's hospitality lighting approach combines architectural understanding and technical knowledge to create inspiring environments for the hospitality and food and beverage sectors.

Commercial and Corporate Lighting Solutions

Modern offices, commercial buildings, retail spaces, and corporate environments require lighting that supports productivity, functionality, and architectural identity.

Effective commercial lighting design improves workplace comfort, supports visual tasks, and enhances the appearance of building interiors and exteriors.

Façade lighting is another important aspect of commercial architecture. Carefully positioned lighting fixtures can highlight building structures and create an impressive nighttime presence.

LightBook provides creative and technical lighting consultancy for commercial and corporate projects.

Lighting design that is sustainable and efficient in terms of energy use.

In today's architectural projects, sustainability has become more and more important. Using energy efficient LED technology, intelligent lighting controls, daylight integration and automated systems can help energy consumption to be reduced, while not being necessary. Lighting designers with experience assess lighting needs and suggest appropriate fixtures and control methods. The goal is to strike a balance between aesthetics, function, sustainability and long-term durability.

Why Choose LightBook for Architectural Lighting Design?

LightBook is a small international lighting design studio started by Vinayak Diwan. It has a multidisciplinary team of professionals that brings architecture, creativity and technical know-how to bear on projects involving lighting. LightBook's design process includes everything from concept development and lighting calculations to technical drawings, fixture specifications, site coordination and commissioning. LightBook has experience in both residential, hospitality and commercial and corporate, and will seek to provide innovative and effective visual environments.

Conclusion

Architectural lighting design is far more than just simply lighting a building. It's the essence of providing interesting visual experiences, adding architectural character, making things more functional, and aiding sustainable development. From luxury residences to hotels, restaurants to office, commercial buildings, the professional lighting consultancy will make a difference. Learn about creative and technical uses of lighting to change the character of architectural spaces with LightBook's lighting design projects.

Visit: https://www.lightbook.in/


r/Lighting • • 9h ago

Designer Thoughts IP65 vs IP66 vs IP67 for outdoor fixtures - a quick, no-nonsense guide

1 Upvotes

I've spent 16 years in lighting manufacturing and still see people pick outdoor fixtures by IP number alone. Quick breakdown:

IP6X = fully dust-tight. The first digit covers solids protection. The second digit is water: 5 = low-pressure jets, 6 = powerful jets, 7 = temporary immersion, 8 = continuous immersion.

For most garden and facade applications IP65 is plenty; if a fixture can sit in standing water, look higher.

Also worth checking how the rating was tested. Real IP reports come from a rain chamber with controlled intensity, duration and angle - not just a spec sheet claim.

Happy to answer questions - I work on the manufacturing side and deal with this daily.


r/Lighting • • 10h ago

Need Design Advise What size rod / pipe is best to fasten lights, mounts, and other gear to?

Thumbnail reddit.com
1 Upvotes

r/Lighting • • 16h ago

Need Design Advise I don’t like the lights the contractor wants to put in the basement.

3 Upvotes

We are redoing a poorly done, unpermitted, not up to code “renovated“ basement. This is not the only area we’ve had to do. It is getting quite expensive.

The renovators want to put 16 Westgate RSL–MCT5 pucks into the ceiling of a 1028 sq. Ft. basement with one window and a sliding door in one corner (so, some outdoor light gets in, but not much.)

They want to charge $111 per puck for parts and labor.

Currently, there are canned recessed fixtures, but who knows how legit they are.

I have sensory sensitivities and I hate these lights. The thought of spending evenings with the family under these lights is unpleasant.

id prefer something more diffuse and with a higher cri but the budget is being stretched quite a bit already.

Any recommendations?


r/Lighting • • 11h ago

Need Design Advise Lights

Post image
1 Upvotes

What's this? I can't get my lights in the right direction.

I essentially don't want to blind myself, but I also don't want them turned internally.


r/Lighting • • 17h ago

LED Drivers High CRI downlight advice needed - HALO ML56?

Post image
2 Upvotes

Having lived through the CFL years I thought LEDs would be easy, but it still seems hard to find good lighting. LEDs are super cheap now, but many don't even list CRI etc anymore, and I don't trust the claims made for many cheap ones. I've a big pile of discards...

However, my wife is complaining about the kitchen lighting (see picture).  The lights (prior owner) are HALO RL56BLE dated 2018.  The spec lists them as 600 lumen, CRI RA=93 / R9=69.  The light isn't bad, but does sometimes feel like "it's bright in here but still can't see very well". Ceilings 10ft.

So I've been looking for options with a bit more output and maybe even better color rendering.  The only thing I found that looks solid is the HALO ML series, specifically the ML56 97F variant with CRI RA=97 / R9=98, 900 lumens, along with a 693WB baffle, and maybe try the optional TIR 74 degree optic?

They are pretty expensive though - cheapest I've found (that doesn't look like a scam) is about $90 USD for the light, + $30 for the trim!   I understand I can't compare with a $5 bulb from Costco, but still >10x seems a bit steep!

Lutron is even worse at hundreds per bulb,  DMF I can't see pricing on the site but I'm going to assume is probably higher.

Questions:

  1. Anyone have experience with the HALO ML56's and are they any good?  Any configuration recommendations?  Anything better at the same price point?
  2. Anything cheaper that might suffice to improve on the current RL56s?

Any advice appreciated!

Thanks.

Halo ML56 Downlighting System spec sheet


r/Lighting • • 16h ago

Lighting Control Lighting Question 💡🤔

0 Upvotes

If you were up against trying to pull off a cinematic scene in a room with yellow walls, how would you approach it in terms of lighting?


r/Lighting • • 1d ago

Need Design Advise Lighting advice

Thumbnail
gallery
5 Upvotes

Exploring lighting options for my wood paneled bungalow. I am definitely doing a swag lamp by the bed side. But curious what you might suggest for layering the lighting. I’m not a big fan of LED, but my pops says it might be good to have some cans. Let me know your thoughts and what you might do, if it were YOUR space. Thanks in advance :)


r/Lighting • • 17h ago

Find Me This Fixture Help me with replacing this light!

Thumbnail
gallery
1 Upvotes

Hi! I have 5 of these recessed lights in my kitchen and I want to replace the super white bulbs with something warmer. The problem is that I just moved into my home and these lights are different than all of the other recessed lights I’ve easily adjusted. I don’t even know what the names of these are to look up how to change the bulb out. Can anyone help?


r/Lighting • • 17h ago

LED Strips Help with the product to buy for under self lighting

Post image
1 Upvotes

r/Lighting • • 22h ago

Need Design Advise Will an off-center ceiling light look bad?

2 Upvotes

In 2 bedrooms + a den. Builder put hardwired heat detectors in the center of these rooms, see pics. I'd like to have an electrician put a junction box for hardwire hookups in these rooms. Then most likely install ultrathin flushmount disk/puck LED ceiling lights for simplicity so I can get rid of all my floor/table lamps for various reasons.

Will it look bad if the new ceiling lights are off-center, keeping the required clearance of 12-18" (whatever the code is) from the heat detectors? Or is it worth it to pay the electrician to move the heat detectors a couple feet so that the ceiling lights can go there. The number of holes in the ceiling would be the same either way so no additional drywall patching costs.

A few notes:

- All 3 ceilings are on the second floor and there is attic access. Ceiling height is just over 8ft.

- All 3 ceilings are not perfect rectangles. As in the ceiling continues to a small hallway and/or narrows to a door entrance which you can see in the pics. So maybe being off-center won't be that much of a distraction due to this.

- All 3 ceilings are ~10-11ft x 12-13ft (not including the narrowing parts). So the recommended flushmount ceiling fixture is 20-24" diameter.

- The master bedroom (downstairs) does have a light fixture in the middle of the room & the heat detector is a couple feet away (off-center the room) - builder put it in this way. So seems okay to move the heat detectors off-ceneter at least from code perspective (of course electrician will verify).

Would love to hear your opinions!

Den: the area being lit stops at the skylight because anything beyond that has it's own recessed lighting (1 in the pic + 2 more not shown)
Bedroom 1: ceiling narrows at the upper right due to entrance
Bedroom 2: ceiling narrows at the lower left due to entrance and has it's own recessed light at the entrance

r/Lighting • • 1d ago

Replacement Ceiling fan light led replacement help

Thumbnail
gallery
3 Upvotes

Hey all! Led Light went out I think. my ceiling fan says not to exceed 14w for replacement but all I can find on Amazon is 15w led replacement. Is this dangerous? Is it ok? I’d rather stick to Amazon rather than go on Samsung website and order the exact replacement and spend more probably.


r/Lighting • • 1d ago

Need Design Advise New Build - Any Regrets Going Canless?

Post image
0 Upvotes

r/Lighting • • 1d ago

Lighting Control WLED Window Candle

Thumbnail gallery
1 Upvotes

r/Lighting • • 1d ago

Need Design Advise Looking to replace two gimbal ceiling lights

Post image
3 Upvotes

I have two gimbal lights; the cans they are installed in are 6". What is the best modern replacement for these two fixtures? They aim at a wall above a fireplace. It eventully will have a painting installed.


r/Lighting • • 1d ago

Designer Thoughts We built a free IES/LDT viewer and editor for Mac — feedback welcome

1 Upvotes

I’ve used Macs since 1993 and work in lighting design. Being able to work with photometric files directly on my Mac has long been on my wish list.

Our team at Vitrulux built IES/LDT Workshop, now available free on the Mac App Store.

It brings together:

• IES/LDT viewing, polar curves, 3D views and data tables

• Photometry comparison and editing

• Batch file preparation for DIALux workflows

• Quick Look previews in Finder

It’s a tool for working with photometric files, rather than a replacement for a complete lighting design package.

No subscription or in-app purchases.

Disclosure: I’m part of the team behind it. I’d welcome feedback from people working with real manufacturer files — especially what’s missing from your everyday workflow.

https://apps.apple.com/app/id6825924114