r/ModelShips • • 7h ago

Handmade

Thumbnail gallery
47 Upvotes

r/ModelShips • • 2h ago

1:700 Olympic Paint Ideas

Thumbnail
gallery
13 Upvotes

Hey all,

I recently purchased the Hobbyboss 1:700 Olympic, but I have a "What-If" paint job in mind.

I love the idea of painting her around 1913-ish, after the Titanic-sinking modifications, but before military service. However, I was thinking of when Olympic was launched in her white hull paint, and came up with a "What-if" idea, as if she kept her white hull throughout her oceanliner days.

What would be the best SMS colour for that white/light grey look? I have Insignia White, but looking at German Creme too.

Cheers all


r/ModelShips • • 9h ago

My journey with the Polaris so far

Thumbnail
gallery
41 Upvotes

I ordered the OcCre Polaris kit about two months ago, and I’ve absolutely fallen in love with this hobby so far!
I basically have zero woodworking or DIY experience, but I genuinely enjoy every hour I spend working on the kit. One of my favorite things is watching the ship slowly take shape, piece by piece.
The only part I’ve really struggled with is the first layer of planking around the bow. I probably made a few mistakes early on because I didn’t fully understand how the planks were supposed to come together in that area.
I think I understand it now, but I’m a little worried about how to fix the mistakes I’ve already made.
Do you think I can still salvage the bow by filling the gaps with small pieces of wood and sanding everything smooth? Or would I need to remove some of the planks and start over?


r/ModelShips • • 17h ago

HMS victory build log

Thumbnail
gallery
117 Upvotes

An update on build leaving the coppering till later, working on 32 lb cannons at present,

I'm looking for help.

The rigging ct1 in the kit, brown in colour and 2mm.is that the rope hanging out of the bow.


r/ModelShips • • 9h ago

Need some tips on making a wooden fishing trawler model

5 Upvotes

hey guys im planning to make a 60cm wooden model of our 60ft family fishing trawler as a surprise gift for someone special

i have zero experience in wood carving or model making 😭 but i really want to make it myself and get the hull shape as accurate as possible

its a double cabin wooden trawler and i only have photos for reference

should i carve it from solid wood or use frames and planks? also what wood and tools would be best for a beginner?

any tips would really help thanks :)


r/ModelShips • • 1d ago

Scottish Maid (1839) - so far.

Post image
58 Upvotes

r/ModelShips • • 4h ago

any good yet easy battleship model kits? (1/700)

Thumbnail
1 Upvotes

r/ModelShips • • 1d ago

Three Sisters California

Thumbnail
gallery
28 Upvotes

I am taking on my first restoration project for a friend. It is a 3-masted schooner with a raised poop deck and a single cabin, taking up most of the raised deck. I have been able to find an actual ship it is modeled after so my guess is it not an actual ship. Which could make the restoration easier as I can do what I want.

But before I jump any deeper into the restoration, I wanted to post a few pictures of the ship plus see if anyone knows of this ship, or potentially another 3-masted schooner with the 2 decks and only one cabin. If I can find another similar ship, that would be a huge help.


r/ModelShips • • 1d ago

San Juan Nepomuceno (1:90). Spanish Ship of the Line, launched in 1765, captured by the British Royal Navy. Sold out of service in 1816. Size - 960 x 400 x 750mm. 74 cannons. Took about 18mths.

Thumbnail
gallery
125 Upvotes

r/ModelShips • • 2d ago

New display set up/Recent Builds

Post image
91 Upvotes

I needed a bigger shelf to display the monster that is the 1/350 Fujimi Shokaku and had to do some rearranging of my recent builds.


r/ModelShips • • 1d ago

Ship model repair in NY?

4 Upvotes

As stated. I really need help finding someone near NYC/Westchester/Putnam county. My FIL’s ship was ruined. My wife loves it. I just want to make them both happy.


r/ModelShips • • 1d ago

I want to start getting into model ship making. Are there many models available for the Udaloy in 1:700 scale?

2 Upvotes

r/ModelShips • • 2d ago

Free test print for my 238cm (1/87) RC USS Massachusetts

Post image
4 Upvotes

https://cults3d.com/:5247991

Almost done with the 1/87 RC USS Massachusetts (238 × 37.9 cm, fits 200×200mm beds). Uploaded a free test print on Cults3D (AntBase) with the bow tip, a hull section with 10mm rod channels, and a turret so you can check tolerances before the full release :)


r/ModelShips • • 2d ago

Looking for model yatch plans to build

1 Upvotes

Does anyone know where to go?


r/ModelShips • • 2d ago

I 19 ijn submarine

Post image
14 Upvotes

This is my third model I’ve build and painted any tips are great


r/ModelShips • • 2d ago

Cardboard sailing ship

Thumbnail gallery
44 Upvotes

r/ModelShips • • 3d ago

Zuikaku and Akagi painted for victory at sea

Post image
26 Upvotes

Forgive me for my placement of Zuikaku ID, decal is not a perfect fit for 1:1800


r/ModelShips • • 3d ago

USS Enterprise and USS Fletcher

Thumbnail
gallery
124 Upvotes

Diorama created as a gift for my senior modern history teacher (ran out of time to take proper photos)


r/ModelShips • • 3d ago

A few more Victory pics, although I'm not exactly 100% when it comes to photography...... 104 cannons.

Thumbnail
gallery
149 Upvotes

r/ModelShips • • 3d ago

Any advice on Chinese kit quality and value?

2 Upvotes

I’m considering a larger scale build of a workboat or trawler. I love the look of this Tintin ship or this herring boat as an RC project.

I suspect the Chinese model will come without much rigging fittings or deck machinery and by the time I buy or make railings, winches, masts, antennas etc I’ll spend as much as if I just bought a high quality model.

Has anyone any experience with these sort of Chinese supplied models and can offer feedback?


r/ModelShips • • 4d ago

The progression of my Horatio Nelson's HMS Victory from The Battle of Trafalgar. 1:84. Length - 1202mm (805mm), width - 470mm, height - 875mm. Work took about 18mths, although spread out over 5yrs primarily due to university (mainly holiday work). Used superglue and varnish over pva and paint.

Thumbnail
gallery
89 Upvotes

r/ModelShips • • 4d ago

KMS Scharnhorst 1:700 Tamiya

Thumbnail
gallery
52 Upvotes

The predator of the seas (for wargaming). No flag since the crappy Trumpeter transfers from another kit dissintegrated lol.


r/ModelShips • • 4d ago

HMS Colombo AA Cruiser 1:700 Trumpeter

Thumbnail
gallery
45 Upvotes

An approximation of the dusruptive paint scheme was done freehand with Tamiya acrylics. No bottom hull in new Trumpeter kits is no problem since this is a wargaming project. However, the lack of a baseplate caused an upward bow curve that could not be fixed.


r/ModelShips • • 4d ago

King of The Mississippi paddle steamer, 1:80, with a bit of shark added at the bottom.

Post image
84 Upvotes

r/ModelShips • • 5d ago

Blue Nose II Schooner (Canadian Fishing Boat) - Fastest Yacht (1921 - 1946)

Post image
176 Upvotes