r/Nerf • u/Phonesink • 10h ago
Armory Your favorite “Feel good” blasters ?
Specifically ones that you consistently come back to mess with. What aspects make a “good” feeling blaster to you?
r/Nerf • u/Phonesink • 10h ago
Specifically ones that you consistently come back to mess with. What aspects make a “good” feeling blaster to you?
r/Nerf • u/MarioAteMyDarts • 1h ago
After my original plunger craked i decided too do something interesting which is a expanded plunger tube mod.
the concept came from a old yt video of a xtp mod done with the plunger tube out of a buzz bee baron, aside of the fact that those mega buzz bee blasters are quite rare and especially if your outside of the US, the mod required alot of shell cutting that would get rid of a plate that guides your bolt sled and gears and would leave your plunger tube exposed, soo not really ideal.
i though of using a xshot meteor plunger tube as a alternative, its big and is or was accesible but it would end up in the same situation or not even posible since its alot bigger than a baron tube.
then i though about using the plunger tube out of my failed xshot pro last stand concept mod since it was already broken and it looked like it was almost perfect for it almost like if it was meant for it, soo i started cutting and sanding some plastic of the shell too make the tube fit.
grabed the craked tube and cutted the front lip of it too then put it in the new xshot tube, i sanded the front hole of the new tube a little bit until the lip friction fits on it while checking it was still flush on the front inside, cut the excess plastic of the xshot head and cutted the front of the stock plunger rod, sanded the excess and drilled a little hole on both pieces too hold them together with a tiny screw, since the plunger tube sits a little higher i had to put the plunger rod as low as posible so it can go throw the catch and spring rest. (i had to redo this since i messed it up the 1st time)
while cutting the shell i got 1 out of the 2 side rubber pads out of it without destroying it which later on i glued it on the front of the xshot tube above the lip soo it sits against one of the blaster screw posts for support, once done with that i put teflon on the o rings, put some ACTUALLY FUNCTIONAL foam padding!, lube it up and test it, due too the cuts that i did on the front lip the stock barrel o ring struggles to go in smoothly even lubed and it suffers a little leak in there bewteen the barrel and plunger tube and it wont go in fowards at all if you add teflon tape under that o ring.
i tried sanding the insides of the lip and tested it multiple times but no luck doing that with sand paper without trying to not mess up the inside and i dont have a deburring tool too fix it therefor while im on my way too get one i left the barrels o ring stock for now despite the little leak, which is why the front lip was glued with hot glue and the plunger head/rod are held by a screw as a temporary test since they will be glued permanently once i adress these things.
i reasembled everything and give it a try and it definetly felt like it shot alot harder than before probably 90fps on its stock spring with spacer but ofc it only lasted 2 shots after the lip blew off.
overall this is actually my first expanded plunger tube mod i do on a blaster and after seeing it kind of work im definetly gonna be making alot more progress with it until it works smoothly, i also plan on getting a 5kg spring and brass for a short dart sealed breech system, considering i did 145fps on the last stand which had about 6kgs of spring force, 9-10 ccs less due too the limited draw and a 65ish% air seal, i might get about that or 150fps with this or maybe higher considering its using the full draw of the plunger tube and it will have a 100% air seal.
for comparison if my math is not wrong the slingfire's stock plunger tube has about 27cc of air volume with like a 50mm of death space on the front, the xshot last stand plunger tube (which is also used in the turbo fire, berzerko, max havoc, mad mega barrel, ranger x8, the blitz hammer, horrorfire doomsday and maybe the reflex 6) has about 56cc of air volume when is fully used which is like only 1 or 2 ccs smaller than the og nexus pro's plunger tube.
and yes if you dont care about brass breeches and short darts, it can still work with full darts completly fine with the expanded plunger tube.
r/Nerf • u/shoelesshistorian • 13h ago
r/Nerf • u/Severe-Bullfrog9680 • 14h ago
My main blasters for when I attend events!
XYL Unicorn has the longer barrel and beefier spring upgrades, plus a Bcar hidden inside the osprey. Averages around 180fps
Rival Pilot has been converted to use darts and has a blue Worker barrel plus a worker Bcar.
Overall guchi and doesnt seem like I'd be replacing them anytime soon. Cheers!
r/Nerf • u/Sprocraft • 46m ago
Purchased the 300 fps spring, steel plunger and catch set, zwq cyclone ex bcar and sabre t heavyweight darts, I did not know but I believe I need lube(s) for the plunger and catch? What lubes do I purchase and where can I purchase them locally, my kunlun is the clear case with red if that makes a difference.
Also I want to purchase a half dart drum magazine but don't have a 3d printer, I know some websites are shady and "stole" designs so I want to make sure I buy from reputable sellers, where can I buy these and how many darts are each? I'm preferably looking for something with a high dart count, but if it jams easily or something I'm open to other options.
Hey everyone! I’m doing a quick poll to see what you all prefer when it comes to how blasters are portrayed in my artwork. Personally I definitely lean toward the cutesy, feminine, anime-esque side of the hobby. While I love drawing like that, I also want to draw stuff that everyone can enjoy without feeling like the cutesy vibe is too heavy-handed.
Here are some questions I have...
1. Do you like art that only features blasters, no characters?
2. Do you like art that's in a meme format?
3. Do you want art related to printed blasters or only Nerf/DartZone/Xshot ones?
If you want to vote, send a comment down below :3
r/Nerf • u/Abby_theAnimeFan • 24m ago
So I recently got into this Hobby and am getting a nerf Elite n-Strike Retaliator soon because it aparently is easy to mod. Are there any tips you have for it? (I am trying to get it to become Long Range with good accuracy. If there are better Models that are also beginner friendly, please do Tell me)
r/Nerf • u/Far_Challenge_4273 • 1d ago
Kinda sad to see all the work that was put into this, regardless of how well, and see it just left here
Edit
It was suggested to me to post the location of the blaster so someone could maybe find it. If you live in the Utah area it’s the deseret industry’s in Orem, I’m unsure of the exact one tho. There were a few other blasters there too that might be worth looking at
r/Nerf • u/Iron_Dragon225 • 2h ago
Reposting bc mods took it down for some reason (I wasn’t told why so if I’ve broken a community rule here please let me know)
Hi yall,
I recently thrifted a nerf retaliator with the intent to paint it over my upcoming Thanksgiving break, but I’m having a little trouble figuring out what I might like to do. Additionally, I’m not super experienced with customizing blasters. If anyone could share a picture of their own customized retaliator for inspiration and/or any tips and tricks you know that would be helpful, it would be greatly appreciated.
Thanks!
r/Nerf • u/meingonk • 1d ago
recently attended Winter Nomads at Kulturcenter Wonderland in Denmark, very cool venue in an old dairy factory.
used my MS-GnK V1.3, having a high fps flywheeler in a small package seems to be the way to go for these events. My wife took the kids. Also ran a HC Diana with a DPI Trifolium board.
r/Nerf • u/Educational-Force776 • 4h ago
r/Nerf • u/DefyantM0ds • 1d ago
Python gets a SillyScope and new side prime. Still a very underrated blaster that's built like a tank! This one still runs the mgn12c rail for some extreme solid primes.
r/Nerf • u/FishShtickLives • 17h ago
Hello! I want to make a leedle dynamics Hammerhead because I really like it's functionality, but I'm not the biggest fan of how it looks. I want to remix some cosmetic parts just for myself, but Im not sure how to go about it. Should I do it in Blender? Autodesk Fusion? Do I try and edit preexisting files, or do I make my own parts from the ground up?
r/Nerf • u/Joker_of_Doom • 1d ago
Nothing fancy just a .step file:
https://www.printables.com/model/1919455-build-your-own-dart-zone-retro-shot-blazer-barrels/files
r/Nerf • u/Chistmas1997 • 15h ago
I’ve been working on a stryfe I’ve been slightly modifying, nothing crazy yet. But I bought a worker half dart magazine and the adapter because I wanted to fire half length darts. But the spring in the magazine is pretty crappy. I’m running dart zone half lengths right now. just wondering if I should just buy another mag or if it’s the darts. Thanks for any help in advance
r/Nerf • u/Minecraft_Disk_Seek • 13h ago
Hey everyone,
I'm having an issue with my Nerf Rebel Ops Deadeye. The barrel isn't spinning properly it always seems to get stuck in the exact same spot every time.
The only way I can keep it cycling is by manually spinning the barrel a little, firing, then the other shots come normally, untill it reaches that spot again. If I don't do that, it just gets stuck at that same position.
I've looked at the internals as much as I can, and nothing seems to be jammed or blocking the mechanism. Everything looks normal, but the barrel still binds at that one spot.
Has anyone experienced this before or know what could be causing it? I'd really appreciate any advice or things I should check.
Thanks! I Will provide the internals photos if necesary
r/Nerf • u/darkmaou • 2d ago
added sights and side ammo storage.
r/Nerf • u/j_kkingty • 1d ago
I got bored while studying for my exams and I decided to make my first nerf blaster. I just used an drain blaster and a silly shell adapter
r/Nerf • u/Local-Corgi-9291 • 1d ago
I’ve heard Rustoleum 2X Ultra Cover Satin Clear Coat was the best for Non Solvent Based sprays, but I keep seeing so many others recommended. Anyone got any suggestions?
r/Nerf • u/Sufficient-Hornet-43 • 1d ago
I've just finished building up a longshot with a 17/32 brass pusher breech and 10kg spring however 1 in 3 shots is either a squib or just farts out the front. i was wondering if yous would have any advice to fix this. I've polished the barrel and I don't think its the spring as the airseal is good as shown and when the darts come out properly they are shooting about 150fps (my guess I don't have a crono)
r/Nerf • u/FishShtickLives • 1d ago
I wanna get an optic for some if my blasters, but to be honest I dont really know what to get. Im sure its not that complicated, but Out of Darts didnt have a lot on their website so I thought Id ask here for recommendations. Im not expecting it to like, radically change my performance or anything I just think theyre neat lol
r/Nerf • u/Other_Ad_398 • 2d ago
I have a light addiction to thrifting generiChinesium blasters---so thrashy, semi-accurate (volume==accuracy), and teaches me just how small a wiring harness can be and still pass electrons. Some of these are deeply awful (no rev trigger? Just let 'em run!). But, at $5-15 each....worth the solderbites.
r/Nerf • u/roguellama_420 • 2d ago
r/Nerf
•
u/DefyantM0ds
•
2d ago
Look at it just balancing there on a banana mag and all like. These are such a snappy little blaster to use. Perfect for low sub 200 fps games and it takes a full size spring so its infinitely tunable getting close to 250fps! ...This ones for a good mate... but i still have my Pro Version and my personal colour collection :)