r/NightVision • u/olivelikesgreen • 12h ago
just finished fully setting up my helmet, safe to say i adore it
gallerythe nvg i have is a pvs14 gen 3 green phos (obviously lol)
r/NightVision • u/Fancy_Sound6753 • 2d ago
Built in February of 2025 and only had 1 hour of actual use when an emission popped up. These tubes have never seen hard use let alone get dropped. Super disappointed to find this on the first night of my camping trip. Sent a repair request, hope they honor the warranty given its bigger than the spot tolerance I believe.
r/NightVision • u/OrdinaryChimp • Sep 30 '26
Original post: https://www.reddit.com/r/NightVision/comments/1qd8ubx/i_am_getting_sued_for_a_quarter_million_euro/
Its been a while since the last post on this subject. We have been busy building the KB DT-M and a sensor fusion device. Now that the lawsuits hot phase is over and clarity has emerged. I want to give everyone an update and a glimpse into how we handle this whole situation, because if things are not clarified, customers and our partners will assume the worst.
First I want to rule out the worst case scenarios. KB is not going to fall off the face of the earth, even in the worst case scenario outcome. A certain competitor, no longer worth naming, could in the absolute most unfavourable outcome win and be awarded 250k and we’d have to halt the KB DT-2 production. This is a sum and an outcome we can comfortably absorb at this stage, as we are quickly diversifying and expanding our product offering. I am privately backing KB myself, have put close to 1mil$ of my own money into the company and am not going to let 250k kill it. I’ll put another million in if needed without breaking much of a sweat.
Now with that being said, the chances of them winning is next to none. We have done our legal research. And now filed our response some weeks ago, addressing every allegation in detail with supporting evidence and arguments with our extensive legal research backing up the claims. They got some work cut out for them to say the least. However this whole process is probably going to drag on another few months.
We are now moving on, they can come up with counter arguments to our defence, which I doubt will hold much water given the flimsy arguments they stemmed in the initial suite. But all of this has not stopped us from continuing our work and focus on what actually matters here. I realise they win if we let this distract us too much from our core focus, which is to build cool stuff. And let me tell you, building cool stuff we have done. So much so we thought it was worth spending a bit on a SHOT SHOW boot for next year 2027 to showcase what we’ve been busy building.
On the product side of things, we expect to start shipping out the first couple KB DT-M devices in the next month or two. We have managed to collect overwhelmingly positive feedback from our military trials, which we have implemented. At this stage we are also finalising a patent application for a new IPD solution for the KB DT-M which we’ll be filing in EU and the US. Removing any previously prevailing uncertainty around our legacy IPD solution on the KB DT-2. We took precautions not to ship the KB DT-2 into the US with the legacy IPD, this has now been remedied and addressed moving forwards.
We have been iterating at a fast pace, mis-steps happen naturally, course correcting and moving forwards is what ultimately matters in order to support our customers and partners with the best technology and gear. We want to thank those who have stood by our side throughout.
Edit: forgot to mention about Shot, for those interested we'll have booth 61011 on Level 1 in the Law Enforcement section!
r/NightVision • u/olivelikesgreen • 12h ago
the nvg i have is a pvs14 gen 3 green phos (obviously lol)
r/NightVision • u/MechanicalTesla • 9h ago
• AstroShader iso 310 and 3 second exposures x 15.
• The Horsehead and Flame Nebulae
• The Pvs14 Gen 3 monocular night vision device with the following specifications:
• Photocathode Sensitivity: 2058 FOM: 2700
SNR: 37.5 EBI: .7 Halo: .7 Center resolution: 72
• Unfilmed/filmless Gated 18UM 11769 style is also mentioned.
• svbony sv48p 102mm With SVBONY SV188P Telescope Diagonal, 2" 90°Mirror Diagonal 99% Reflectivity
• Sky-Watcher 150i
• Tele Vue 55 mm eyepiece
• Sharpcap polar aligned and synscan pro one star alignment.
• Lightroom minor touches
• Baader H-alpha 2" Narrowband CMOS Optimized 6.5nm Filter
r/NightVision • u/Blackout_Ballistics • 3h ago
The SureFire RC4 Flash test is now live on the channel! It’s important to check out our disclosure before you watch this video!
We will be featuring the RC4 Mini next!
Let us know how you think this can performed!
r/NightVision • u/potatohandpie • 4h ago
After filtering out my needs, I've narrowed down to the AGM ReachIR 35-640 and Nocpix LUMI H35. I'm not familiar with the Nocpix brand so hoping to see if anyone here can give me insight on them (there's about a $100 savings with them).
r/NightVision • u/NicksNightVision • 1d ago
r/NightVision • u/NightfallOptics • 15h ago
Nightvision Ghosting & Streaking Explained
Ever noticed a temporary streak, shadow, or ghost image when looking through night vision? Here's what's actually happening!
Ghosting or streaking is a common characteristic of image intensifier tubes, especially high-performance Gen 3 systems.
When a bright light source enters the tube, it can temporarily cause a residual image or streak due to the response of the photocathode and microchannel plate (MCP). As you can see in this video, the streak gradually fades away and the image returns to normal.
Why does this happen?
Night vision intensifiers amplify extremely small amounts of available light thousands of times. Bright or concentrated light sources can temporarily affect the tube's response, creating visible streaks or ghost images.
- Common in modern Gen 3 image intensifiers
- Often more noticeable around bright or concentrated light sources
- Typically temporary and fades naturally
- Does not automatically indicate a defective or damaged tube
The important distinction is temporary streaking versus permanent image damage. If the effect fades away and the image returns to normal, it's generally a normal characteristic of image intensifier technology.
At Nightfall Optics, we believe in educating our customers so you understand exactly how your equipment works!
Have you experienced streaking with your night vision? Drop a comment below! 👇
r/NightVision • u/Von_plaf • 4h ago
So I am looking to get my first own monocular night vision, for years and years I have been using the standard issued PVS14 with the Norotos rhino mount and bayonet mount with all the different helmets I have had.
But I was looking at getting a used NVG for my self, So a buddy gave me an ok offer I guess.
UANVM Tanto with Carson optics, NVT5 tube 1600+ FOM white phosphor, less than 40 hours of use time and no blemishes
Have ordered a new padded NVG pouch for my kit, We are not gonna talk about how we use to store the issued PVS14 with out doing stuff and not fitted on helmet ;)
But as a 15+ year long user coming from the stock issued PVS14 and Norotos mount and to something more modern like the Tanto what should I look out for when buying it and keep and eye on when using it ??
r/NightVision • u/SamCrowy • 6h ago
Recently, lots of new debris specs have popped up on the right side of the my 1431s, every time I unscrew the lense to clean it, new specs seem to appear.
Has anybody got any advice on how to properly clean them?
r/NightVision • u/AppearanceAwkward134 • 17h ago
Forgot to post this a couple weeks ago, traded an ap5p with a good amount of mags and other mp5 parts for this Jerry 31 setup, came with the helmet, bag, bunch of batteries and case. I've got a bridged PVS14 setup figured this would be a decent setup for a spare for my wife/homies.
r/NightVision • u/FasstTech • 11h ago
I've been looking into image intensifier tubes for night vision applications.
There are quite a few things to consider, such as FOM, SNR, resolution, phosphor type and overall image quality.
For those with experience in night vision, what do you usually prioritize when choosing a tube?
Green or white phosphor? Gen 2+ or Gen 3?
Would be interested to hear your thoughts and experiences.
r/NightVision • u/pointblankjustice • 22h ago
So what you're seeing in the video is a Photonis WP Gen 2+ tube (XR5 reject), looking at a blank wall in a dim room. The normal blems and pepper are visible, as expected. When I increase ambient light (turning on a flashlight behind my back), it's as if every faint or even imperceptible bit of pepper blooms into a full-blown blem/spot. I've built and handled dozens of Gen 3 devices but admittedly very few Gen 2+ or Echo devices, so I have no idea what I'm looking at here and hoping someone has some insight. It functions perfectly fine under normal dark conditions.
r/NightVision • u/Prestigious_Roof_543 • 1h ago
I need a rifle scope. I’m not going to be folks any hunting. This is mostly for fun and at the range . But I do live deep in the woods.
I was going to get the palmetto state armory deal for a vortex strike eagle gen 2 with mount for 220.
But someone is trying to sell me a new in box wraith
Is the night vision from the wraith totally garbage? Or would it be a cool add on feature for what I’m hoping will act as a budget rifle scope
r/NightVision • u/BigFrawger • 3h ago
I often see the tube assembly or parts for image intensifier tubes, how would someone go about making a tube?
r/NightVision • u/Infinite-Ad-6808 • 15h ago
Long time listener, First time caller here. Im trying to see better at night without a flashlight, and I'd really like to get into tge clip on thermal game. Looking for the best price/bang for my buck! Heard good things about the infiRay clip on's but that was awhile ago. Please go easy on me
r/NightVision • u/ahelplesslamb • 23h ago
Currently have a bino setup with elbit tubes with these specs: 64/64 Resolution, 35.6/35.6 SNR, 2278/2278 FOM, 1.59/1.45 EBI, 0.77/0.75 Halo, 56142/56018 gain
Have an option to upgrade to this set trading in my tubes + $1200: 76/76 Resolution, 34.3/34.4 SNR, 2606/2614 FOM, 0.76/0.81 EBI, 0.78/0.78 Halo, 56406/55358 gain
Are those tangible enough differences for the price increase?
r/NightVision • u/WS-6 • 1d ago
I’m not sure if I’m fully regarded but taking pictures through tubes is difficult.
I freaking love the NODs. L3 38 SNR+. I’ll learn the ways of pictures.
r/NightVision • u/Western_One_9932 • 1d ago
Howdy!
I have an MP5 with a surefire mini scout vampire. I'm just looking for a high quality, low form factor IR laser (no illuminator needed).
The GL4 looked perfect, size wise but it's apparently a hunk of crap. What does this thread recommend? The steiner OTAL looks interesting but I'd love to hear from you all and maybe see some other fellow subguns for what works. IE, a peq15 or dbal would be obnoxiously large.
Thanks!