r/PLC • u/LiDAR3DGUY • 8m ago
Video Corrugated facility as digital twin
used LiDAR scanning to create a detailed 3D digital twin of the production floor, capturing equipment, machinery, and the surrounding environment.
r/PLC • u/LiDAR3DGUY • 8m ago
used LiDAR scanning to create a detailed 3D digital twin of the production floor, capturing equipment, machinery, and the surrounding environment.
r/PLC • u/SendGhostGuns • 1h ago
I’m adding temperature sensors throughout a refrigerated warehouse to trend temperature data back to a PLC. I’m looking for a 2-wire, loop-powered (4–20 mA) option. A local display would be nice but isn’t required, and temperature is the only signal I need.
What hardware have you used for this, and what would you recommend?
r/PLC • u/TimmothyMadison • 1h ago
Has anyone done anything cool
For their homes with an AB plc ? I have a 5069-l310erm from a leftover project that followed me home … trying to find the best use for it
r/PLC • u/AggravatingIce2846 • 3h ago
Hey y'all -
I am a newly-certified journeyman electrician who works in distributed power generation for a generator OEM. My job is mostly programming niche controllers for generators and solar equipment, with a good side of testing, configuring protective relays, commissioning switchgear and troubleshooting simple instrumentation issues. I have an unrelated business degree.
I like my job a lot, but a year and a half in and I'm finding it to be very repetitive and rather unengaging.
Is there room for me in IC&A? Is the pay any good? I want a job where I'm actually solving new problems routinely, instead of fixing the same stuff on the same equipment.
r/PLC • u/Fun-Increase-1127 • 11h ago
Some time ago, i don't even know what i did, my iFix stopped working. When i try to open an existing dynamo, or try to set a foreground, position or any animation i get thrown to VBA with a Compile error: Variable not defined for FixTimeDefControl1, or when trying to make a new picture, same error for CommonDialog1. I tried uninstalling and reinstalling, uninstalling and deleting all GE/Proficy/iFix files before reinstalling, but nothing helps. Any solutions?
r/PLC • u/Terrible_Command3683 • 17h ago
I work in a large water treatment plant as a water treatment and make in the low 100Ks in NJl. Is it worth it to take classes in PlCs to advance my career?
r/PLC • u/Suitable-Ad4325 • 21h ago
Hi! Another post abt migration ikr? I know I should just go on linkedin and apply but I've been reading some threads around here and in other communities about the trades, industry and immigrating to Canada, to give some background I have a 2-year vocational school diploma in automation and robotics, I've worked as a maintenance apprentice for 1 yr at a cement plant, and now I'm working as a commissioning tech in robotics.
I've been thinking for some time now about moving to Canada for a few years, somewhere like Alberta or BC (closer to the rockies!)
I know Canada is not as much of a machinery export hub as my region is, but I know that manufacturing industry is still big and maybe I could reasonably find a job after getting a working-holiday visa or lining up a job beforehand with the young professionals visa programme, and I've been doing some research abt these 2 regions and I still had some questions, so if someone with more background on the industry could shed more light on my ignorance I'd more than welcome it!
What's labor demand like right now? Is it a good market? Which companies tend to hire younger juniors, and migrants? (i'd guess staffing agencies and recruiters would be a good place to start)
How much commissioning/controls work can you do in BC or Alberta without a ticket? Where is the line between unticketed controls and red seal industrial electrician? Is it possible (and feasible) to start an apprenticeship in BC with the WHV hoping to get a job placement?
Happy to hear any feedback, thanks so much for reading!
r/PLC • u/waitforit2010 • 23h ago
I got a job offer as a Controls Engineer (remote & travel) in the material handling industry (conveyor belts and warehouses). However, I don't know much about it besides what the job description states.
My background in automation is very limited since I spent 1 year as an Electrical and Controls Engineer at a paper manufacturing plant before this job offer. I dealt with electrical engineering (power and low voltage systems) and automation (PLCs, VFDs, and switches). Going from an industrial paper plant to a warehouse will be new to me. Material handling also seems heavy on automation solely when compared to manufacturing (paper) that does both electrical and automation.
Can I get some insight from those that have done both?
r/PLC • u/AcceptablePromise577 • 23h ago
Hey everyone, just wanted to share a bit of my setup and current situation.
I'm currently in my final year of prevocational secondary education (approx. grade 10/age 15-16), and while most students in my class struggle with basic start-stop holding relay circuits even with a wiring diagram in front of them, I've been given free rein by my teachers to work on industrial setups.
Instead of doing basic indicator-lamp practical boards, I built this complete industrial control panel entirely from memory/head without needing a blueprint:
My school's practical teachers are currently looking into how to handle my MBO (vocational college) transition next year because even the industrial panel-building companies where I've done internships let me wire enclosures completely solo. They're trying to figure out how to keep me from dying of boredom during basic classes since I'm already operating way past the standard curriculum level.
Has anyone else here been in a similar spot where school felt way too slow compared to actual industrial automation work? How did you handle it?
r/PLC • u/jexrsy669 • 1d ago
Hi everyone,
I’m looking to get a realistic idea of what I should be earning right now. Here is a quick background on my situation:
Experience: 3 years working as a Maintenance/Automation Technician.
Education: Currently pursuing a Bachelor’s degree in Industrial Automation and Robotics part-time.
Skills/Responsibilities: troubleshooting, machinery modernization, building systems from scratch (
no PLCs, just pure relay logic), industrial component mechanical repairing, working with low-voltage power distribution (230V / 400V AC), working with pneumatics, corrosive acids
For those of you in the industry, what kind of salary range or hourly rate should I be aiming for with this background? Does being a part-time engineering student give me much leverage yet, or do companies mostly look at the degree completion first?
Location-wise, I'm based in Poland
Appreciate any insights or advice!
r/PLC • u/BillSea1612 • 1d ago
Hi all,
I started out as a PLC and commissioning engineer and later moved into IT. I still love this field, and I’m now exploring an idea for a startup. Before I go any further, I’d like to know whether you run into the same problem I did.
At a small robotics company, I wrote the FAT/SAT procedures. Writing the procedures and running the tests kept getting out of sync. I’d release version 2, and the commissioning engineer on site would still be testing against version 1. Results ended up on the wrong revision, changes got lost…
My idea is a tool that covers the whole FAT/SAT process, from writing the procedure to running it on site and signing it off, so everyone always works from the same version.
Some questions for you:
I’m not selling anything. I just want honest feedback, including “this isn’t a problem”.
r/PLC • u/Last-Humor8668 • 1d ago
Hi guys, I've just got an offer from a chinese conveyor OEM as a Field Service Engineer and will board on next month. It is said on the job description that I will be working closely with PLC. As an ee grad I dont think there's any significant challenges working with PLC. However, I got my exposure with PLC from class and several online trainings only. What should I prepare for this role?
r/PLC • u/KyotoCrank • 1d ago
We use Keyence HR-X handheld barcode readers, and at seemingly random times the scanner base that connects to the PLC via ethernet will completely lose the ethernet connection. The light on the ethernet port goes out when the problem occurs, and I can fix it by unplugging both the ethernet and the power to the scanner base, and reconnecting them.
There is not a duplicate IP address issue. And I don't think it's a timeout/energy saving issue, because it doesn't occur on all devices when we come back to work after holidays or the weekend.
I have tried different ethernet ports and different ethernet switches.
It's completely random and it can go a week before it happens again on a random scanner.
We have several of these scanners, and it happens to all of them.
Any help at all is super appreciated. Thank you!
Hi all,
I’m from Europe and fairly new to building PLC control cabinets, mostly for HVAC systems. I recently heard that some customers judge a cabinet by the brands inside it. Specifically, using ETI (ETIMAT) breakers can make a panel look “cheap” compared to Schrack or Siemens, even if everything is properly rated and built to IEC 61439.
How true is this in practice?
I’m not trying to cut corners, just trying to decide if paying more for a premium brand actually pays off in how customers see my work.
Thanks!
r/PLC • u/DueWillingness6358 • 1d ago
Hello, community!
I am currently programming an automated system based on five Omron controllers and five Fanuc robots. I am doing the programming, naturally, in Sysmac Studio. The previous developer, whose project I am refactoring, used function blocks to initialise the robot and launch the PNS programme. However, the problem with this approach was that the robot would not resume movement after a pause. Consequently, I decided to create separate programmes for each robot, using state machines instead of function blocks; these do not interact with one another but correctly send output to the UI without interfering with each other’s operation.
My question is: is my approach considered best practice, or would it have been better to stick with the functional blocks after all?
r/PLC • u/West-Appointment-877 • 1d ago
Hi, I'm new here. The hmi pp300 has a status " check cam fill and setting "
This has prevented the machine from starting. Hmi does not accept acknowledgement. No visible led error on the PLc. Mechanical alignment is okay on the machine cam area.
r/PLC • u/packinpennies • 1d ago
Hi all,
I have been quested to program a rod-bending machine that is undergoing a retrofit project. The original controls were DOS-based, and feedback was taken from absolute encoders to control hydraulic proportional valves driving hydraulic motors on 3 axes.
The new controls includes a 5069-L310ERS2 (non-motion) Compact GuardLogix PLC and the system has POINT IO 1734-SSI input cards for the absolute encoders, and analog output cards to drive the proportional valves.
The original plan as laid out by some calls to Rockwell included setting up virtual axes (which are supported in the non-motion PLC models) to leverage the motion planner to control this similarly to a servo drive, and then send the velocity output to a PID loop to control the hydraulic proportional valves. We are looking to control one axis for bend angle, and the other two axes for trolleys with clamps to move the rod to specific linear positions.
However... I cannot determine how to map the inputs from the 1734-SSI card into the virtual axis as position feedback so we can use the motion instructions. Is this possible? How might one go about this if so?
If not... is there an alternative to the motion planner approach we might consider?
r/PLC • u/Gaddinime • 1d ago
From the powerflex 4, I have a start and stop (terminals 1 and 2), 0-10V in on terminal 13, analog common on terminal 14, and RS-485 shield on terminal 16.
If I want to switch this to a 525, am I correct in assuming that the only difference in wiring is the shielded wire. Instead of terminal 16, it would instead go to C1?
r/PLC • u/Puzzleheaded_You9631 • 1d ago
I have a s7-200 plc I want to program for fun but when I looked up the prices of the software needed for it, my jaw dropped because it’s somehow more expensive than my tia portal v18 pro license. I tried to look on retails site but they’re also supper expensive though I have noticed most of them are brand new, so is there a way to get a used one for cheap or even a working computer with a micro WIN v4 license?
r/PLC • u/AcanthisittaNo8207 • 2d ago
I have problem solving this task:
The system controls the ingredient mixing process depending on the selected recipe.
Requirements: Buttons I10.0 (Recipe 1 Selection), I10.1 (Recipe 2 Selection). LEDs Q6.0 and Q6.1 indicate the selected mode. Button I10.2 starts the process (START).
Recipe 1: Turn on valve 1 (Q6.2) for 4s, then valve 2 (Q6.3) for 4s, and finally turn on the mixer (Q6.4) for 10s.
Recipe 2: Turn on both valves (Q6.2 and Q6.3) simultaneously for 6s, followed by pulsed operation of the mixer (Q6.4) – 2s on, 2s off, repeated 4 times.
Additional conditions: During the operation of both recipes, LED Q6.5 (Operation) must be lit. Emergency stop via button I10.3 (RESET) interrupts the process at any time
Is it possible to do it using simple contacts and coils, or is it necessary to use rising/falling edges too? Here on pictures is my current progress, reset isnt added yet but its simple. I have problem making it work like it should according to instruction.
r/PLC • u/The_designer001 • 2d ago
Made some improvements to our setup at the site. Here's a small before and after comparison.
Still learning and improving things. What do you guys think?
r/PLC • u/LordBroccoli68 • 2d ago
I have to write a simple ladder diagram program in STEP 7, but my university does not provide the program, and I cannot always go at the specific times they provide computer access for STEP 7. Is there any free tool I can use to write the ladder diagram and test it? Preferably with the same timer and counter blocks simatic has.
r/PLC • u/Substantial_Depth126 • 3d ago
Hi there, I'm an industrial electrician, 21 years old. I've got some ladder logic concepts including a project of a pallet wrapping machine with a Delta plc.
Now I want to learn Tia Portal the proper way. How do you guys recommend to start?
r/PLC • u/logictechratlab • 3d ago
I've got a question regarding remote access that complies with ISO 13849-1.
ISO 13849-1:2023 (5.2.4) states:
Safety-related software of the SRP/CS shall not be modifiable by remote access unless the local validation of the safety function is performed.
It states that the safety-related software cannot be modifiable unless there is local validation. But how can you even do this? How can you protect your software, so it's not modifiable unless there is local validation?
Or is it a typo in the norm and it should be modified instead of modifiable?
To me it seems like, if you allow access to the safety program remotely, you can only comply with this norm if it's in a written procedure. But even then procedures are easily ignored.
Anyone have any ideas on how to comply with this, without dropping remote access :)?
Or am I misunderstanding this completely?
r/PLC • u/Typical_Aide_9548 • 3d ago
Hi I am changing a panelview 1000 to PV7 connected to a SLC05/4 . I am using a ANC-100e to connect them.
The migration from panelbuilder went ok , and some data are showed , and numeric input are working fine.
The problem I have is with the data from registers in N and F up then certain values .
With a N7:19 I can see the value, but with a N7:160. A message "Data Table N7:19 - N7:160 is too small or missing" ( N7 in Logix is 256 elements size ) , same as Float F31:11 is working great but with F31:72 fails , giving to me the same message , only changing to F Memory. (F31 is 255 elements size )
It seems to me , the HMI is asking more words than the DH+ can handle , but I am not sure if I am ok.
My question is , do I have to re map all the upper memory spaces to a new data table in lower memory spaces (for example N7:160 to N40:0) but is a lot of work , or there is another easier way to fix this .
I already try to put in a new screen one numeric indicator pointing to N7:160 , and it gives to me the same error message , just from 0 - 160 , am I missing something ?