First of, no. Your misprinted card is not likely worth much more then a regular non-misprinted version, unless severe misprinting or an already rare or desirable card.
Remember, your card is only as valuable to the person willing to pay for it.
What is a misprint?
A misprint can be defined as any manufactured product that was not produced as intended and falls outside the established standards. These misprints most often occur on cards themselves but can also happen with booster packs and collection boxes.
Ok, down to the rough and gritty part. There are many different types of misprints for cards and packs. Some take a good eye to spot and some are so egregious you wonder how they made it off the line.
Cards are often considered damaged rather then misprinted depending on the error - basic guide for identifying damage from misprints.
Card Misprints:
Offcentre:
A off-center card is one that is cut in such a way that the sides of the cards are not even. If no alignment dot(s) are seen, the card is considered off-centre. This is the most common of errors.
A combination of card being turned at a wrong angle during printing and then being cut at the incorrect angle leads to cards being cut into the wrong shape.
This is when the typically rounded corners of the card can have 90 degree angled corners.
Flipped Back / Front:
An uncommon error where the back and fronts of the cards are flipped incorrectly. This is most famously found within the Pop 5 Series Mew card - as seen below.
An obstruction error occurs when a part of the plate used for printing is covered with something and it blocks the plate from making proper or all contact with the card on the sheet causing missing blotches of ink.
Holobleed is a common error especially with modern sets becoming more commonplace, where the holographic foil used on the cards art 'bleeds' or spills over to the rest or part of the card.
A mirror holo card is a error caused by the holo film that was meant to put pressed onto the card being very lightly pressed or not pressed at all meaning no foil is visible on the card.
A printer hickey is generally a very small ink error caused by something wrong with the printer causing a small blemish. This is another common error in modern cards.
These cards are often extremely rare and can range from missing a logo to being dramatic and missing large features. (This card is missing the 'Prerelease' Stamp on the bottom right of the art while still having the shadow from it.)
https://imgur.com/a/pB5yscB (Thanks again u/nlnj_a)
Got my two UPCs in the mail and as I was looking at the night one I noticed Umbreon had a second set of ears, whiskers and tail. This is the first time I’ve gotten any type of misprint.
Edit: If anyone has insight of what this would be worth it would be much appreciated!
I recently got my hands on a upc from target and opened it to find the pikachu has a manufacturing error, I had someone offer me $100. Should I take it or hold out for more money??
Opened an ETB of Perfect Order tonight. Had these white dots/splatter on the 2nd to last card of three different packs. Any information about this? Is this common?
Thought this was really interesting! Not sure if it’s anything of value or worth grading but I’m really surprised I didn’t notice this when I ripped the pack. I was going through my bulk for a card show and noticed today haha. Probably ripped this when the set first came out
Has anyone else seen this kind of print error on original era Japanese cards? This is a Jungle Flareon. It looks like the text is not fully filled in, but the outline of the text is complete. I hope its not fake and that there are other examples of such an error.
I’ve recently pulled this Floragato reverse holo and it has this visible line running across the whole card (runs right up through the image and across the name). It isn’t a physical ridge as there is no texture to the card where the line sits. Any ideas what might have caused this?
I pulled three copies of Drifloon 136/128 from the Pokémon 30th Anniversary set and noticed some pretty significant differences in color saturation.
Looking at the photo from left to right, the first card appears noticeably muted or washed out, the middle has stronger color saturation, and the third is much more vibrant.
The differences seem particularly noticeable in the green background, purple, and yellow highlights.
Has anyone else noticed similar variations in the 30th Anniversary cards?
I’m curious whether this is normal ink-density variation between print runs or something that could qualify as a printing error.
Would love to hear from anyone familiar with Pokémon printing variations!
Hi! I follow this community to see cool cards and never did I think I would be the one posting, however today on my birthday opening of Delta Reign I pulled this odd Frillish (027/103). At first I thought it was just the art since this is my first time opening, but then I realized it bled outside of the card art and onto the edges.
I've attached the video here so you can see I didn't bleach it or anything, and I'll put a clearer photo in the comments. What do you guys think? I feel like it's a pretty cool error because the pink looks sort of like a flashlight shining on the frillish, and the pink also reminds me of the female frillish colors! Even if it's nothing special, still a pretty cool find for my birthday :)
Hi all! A friend dropped off a collection for me to sell for her and in it there were these misprints. I am having a lot of difficulty trying to find comps and was wondering if there was a good term to search these on eBay or other places! I had never seen these before and now I yearn for the days of old mirror foils.
not a particularly notable card, but i noticed it when going through a stack i left in my desk drawer i was meaning to put away. looks like it got jostled down and a little to the left. don't think i've ever gotten a miscut before, so it's kind of interesting.