r/Pottery • • 21h ago

Kiln Stuff Complete beginner help

Thumbnail
gallery
6 Upvotes

So I do my first test firing of my kiln , it’s skutt 822-3 , I fired it on 04 cone , medium heat , no hold . My cones came out like this on the photo , also kiln wash flaked off from my shelves , I assume I put too much kiln wash . I’m gonna reapply and should I fire kiln empty again ? Any tips would be helpful , thanks friends


r/Pottery • • 11h ago

Question! What do I tip my teacher?

2 Upvotes

My pottery teacher is going to help me to load and set up a bisque and glaze fire. This is not something that the studio typically does. But she is going above and beyond for me. I will pay for the kiln cost and we are timing the firing to days where she is already scheduled to load another kiln from one of the classes.
She said that I could tip her or not, that it was up to me. I definitely want to pay her for her time and the extra effort. But what would be a good amount to give her? I’m located in Texas.
Thank you!!


r/Pottery • • 23h ago

Artistic Ceramic community

0 Upvotes

Hello guys,

Whenever I seek advice, support, or encouragement about ceramics or the ceramics business, I often encounter a lot of negative feedback. I’m finding it hard to understand why. As an architect, is there only one way for me to do only architecture, even I have the capability to pursue other interests. However, I often hear phrases like “ceramics is hard,” “ceramics is expensive,” and “do your own shop”, “don’t think about ceramics business, if you have it as a hobby bla bla bla.” These statements don’t seem to reflect the reality of the field. And I believe this is not a honesty. It feels like there’s a negative vibe and a sense of superiority from those in the top positions. I think It’s important to be kind, especially when you’ve touched clay with your hands, even just once, you should know that being kind is the most important thing ✌🏻

Thanks


r/Pottery • • 14h ago

Glazing Techniques Tried the Gold Sharpie trick!

Thumbnail
gallery
70 Upvotes

Im surprised how well it worked!!


r/Pottery • • 19h ago

Question! Black Friday 2027

18 Upvotes

Have there been any good Black Friday sale announcements or ones you’re looking out for after good sales previous years? Look for good deals on tools, glazes, etc.


r/Pottery • • 21h ago

Artistic Wheel thrown jar with underglaze doodles - WIP

44 Upvotes

Recently I've been really excited about copying my ink doodle style onto ceramic surfaces with underglaze. I'm still developing my ability to draw/paint, and historically, this has kept me from spending lots of time on surface design work. I usually utilize atmospheric kiln effects or purposeful glaze application but don't spend a ton of time on making individual marks.

Discovering that I can doodle on my ceramic work just like I do on scratch pieces of paper has made the exploration process much more enjoyable. I can scribble and make patterns for hours without even realizing how much time has passed.

Anywho, this is one of a few "doodle-inspired" works and is destined for the soda kiln. I used Velvet underglazes (3–4 coats of white/black), and the doodles were applied with a slip-trailing pen.

Thanks for taking the time to look at my work!


r/Pottery • • 7h ago

Mugs & Cups I made illustrated mugs based on my favourite memories

Thumbnail
gallery
210 Upvotes

This idea has been brewing in my mind for the longest time. Finally got the chance to make these and I'm so happy with how they turned out. I haven't done a lot of landscape illustration painting on ceramics before but can totally see myself doing this a lot more.

Would love to know what you guys think 😊

Process: I use local white stoneware clay that I get here in India, where I'm based out of. I painted the landscape after bisque firing the mugs using a mix of mayco and amaco underglazes and then glazed it with mayco transparent glaze on the outside and corresponding amaco celadon glazes to match the scenery on the inside.

(Reposting because my earlier post got deleted, apologies i wasn't aware i couldn't post by small business name)


r/Pottery • • 17h ago

Kiln Stuff Saw this at work today, thought you all might enjoy

Post image
93 Upvotes

r/Pottery • • 17h ago

Question! Glazing advice/suggestions needed

Thumbnail
gallery
206 Upvotes

Hi everyone, I'm hoping for some guidance from the council here, I've been making a mug as a gift for my wife who is a huge Tolkien fan. I've carved the inscription from the one ring around the mug, but can't for the life of me figure out how to glaze it.

I've just attempted to glaze all over in a slightly fluxy dark glaze, then wax resisted over the writing before attempting to carve out the wax & glaze from the words so I could then glaze inside the letters with a yellowy orange (wax resistant keeping it only in the inlay). But that was a disaster . Just scraped all the wax and glaze off and washed the pot.

A bit stumped on how to proceed! Any thoughts or suggestions would be greatly appreciated!


r/Pottery • • 20h ago

Mugs & Cups MugMugMug

Thumbnail
gallery
264 Upvotes

r/Pottery • • 16h ago

Mugs & Cups I've recently enjoyed drawing cats.

86 Upvotes

I like cats. 🐱 #zixa


r/Pottery • • 16h ago

Question! What to ask when buying a used wheel

2 Upvotes

What questions should I be asking when buying a used pottery wheel? There's one I want to look at and other than the comparing the price to the same make/model new, I really don't know how to figure out if it's a good deal. Obviously age might be a factor , if it is a year old that would be "practically new" but if it's six or seven years old how would I expect that to affect the price. Are there any signs of wear and tear I should be checking?


r/Pottery • • 1h ago

Question! Advice for natural, muted finishes

Thumbnail
gallery
8 Upvotes

Hi friends! I’ve been really trying to achieve some of the natural, layered finishes like in the screenshots attached here and not finding much success. I’ve also reached out to some artists directly (not in a “tell me how you do what you do” way, more in a broad advice/direction way) and have not had any luck. Does anyone have thoughts on the materials I should be using to get closer to these finishes? Engobes? Slips? Underglazes? Mostly for the colors and layering, the texture I am already more comfortable with. I am not as interested in commercial shiny glazes for these pieces specifically. Thank you for your help!


r/Pottery • • 18h ago

Vases My childhood teachers vase.

Thumbnail
gallery
17 Upvotes

This is one of my more personal pieces. Depicting three of my most influential childhood teachers. My mother, my preschool teacher and aunt Kathy, and my high school teacher Anna. All hutterite women.

The floral motifs are inspired by the monograms that were etched on all kitchenware to prevent it from wandering into the neighbor's kitchen.

Body is made of plainsman clay Polar ice, slab built.

The designs are hand painted with finely mulled mayco Jet black underglaze.

The inside is clear glazed.

21.5 inches tall.

#pottery #ceramic #hutterite #art


r/Pottery • • 18h ago

Teapots Whippoorwill and moth teaset

Thumbnail
gallery
262 Upvotes

r/Pottery • • 18h ago

Teapots Some wetland critter inspired pots

Thumbnail
gallery
149 Upvotes

r/Pottery • • 18h ago

Mugs & Cups More new cups

Thumbnail
gallery
23 Upvotes

r/Pottery • • 20h ago

Clay Cooking dinner on my Flameware pan

Thumbnail
gallery
21 Upvotes

Cone 10 reduction fired flameware pan. Made this pan when I was in right before the entire Spodumene shortage. I rarely use it because I am afraid of breaking it because I might not ever be able to make on like it again


r/Pottery • • 21h ago

Question! Just how translucent are celadons?

3 Upvotes

Working on a project in porcelain that I’d like to underglaze a design on then final glaze with coyote clay franks celadon stormy sea. I’ve never used celadons before so my concern is the black underglaze either won’t be visible or will be suuuuper super hard to see.

Thoughts? Advice? I could try a different (lighter) colored celadon if this would be an issue, I just don’t know!


r/Pottery • • 23h ago

Kiln Stuff Kiln firing tips/tricks?

Thumbnail
gallery
3 Upvotes

r/Pottery • • 17h ago

Mugs & Cups Alice Madness Returns

Thumbnail
gallery
9 Upvotes

I’m so proud of this mug!


r/Pottery • • 3h ago

Question! Thoughts How can I improve my dog carvings. It is my absolute favorite thing to create that all started with a friend losing her pup! I have made 6 total so far but want to improve my approach. Right now i carve wet and underglaze then clear coat

Thumbnail
gallery
8 Upvotes

r/Pottery • • 5h ago

Help! Removing silicone oil from pottery?

1 Upvotes

Some silicone got on a low-fired pottery.

The silicone itself came off cleanly, but a dark, wet-looking stain remains where it touched. I think it’s silicone oil absorbed into the porous body.

Has anyone dealt with this? Any tips I should know about?


r/Pottery • • 6h ago

Teapots Teapots are hard to make.

Thumbnail
gallery
3 Upvotes

They’re definitely challenging, but so many intricate details to solve. It’s real fun.