r/ROCm • • 3h ago

AMD ROCm 10.2 Released With Latest Optimizations, Expanded Ryzen Laptop Support

Thumbnail
phoronix.com
19 Upvotes

r/ROCm • • 14h ago

How to Underclock or Undervolt AMD V620 32GB?

Post image
3 Upvotes

r/ROCm • • 3h ago

3 x AI 9700 build - 96gb VRAM

Thumbnail gallery
2 Upvotes

r/ROCm • • 1h ago

I built ROBJØRN, a free one-click overclocker for Radeon Pro V620 / V540 / V520 / V320 server GPUs.

Post image
1 Upvotes

The heist for more power local LLMs 🪓

Datacenter GPUs ship tuned for racks of servers running 24/7. That means safe power limits, capped clocks, and settings you can't touch. AMD's standard tuning tools don't support these cards, so that extra performance is locked away.

So I built a Viking to go get it.

Robjørn (Rob + Bjørn, a Viking Robin Hood) is a one-click overclocker for:

Radeon Pro V620 · V540 · V520 · V320

Load your card's firmware. Drag a slider. Hit Apply. Done.

Why you'll like it

  • 🛡 Never flashes your card. Your firmware is only read, never written. One click puts everything back to stock.
  • 🎯 Built from YOUR card. It reads your card's own power table, so every slider starts at your card's real stock values.
  • 🔒 SHA-256 locked. Every table is hashed, and the apply script refuses to write anything that doesn't match.
  • 🚦 Safety rails. A layout check runs on every firmware load, and Apply is blocked if anything looks off.
  • ⚡ Presets or full control. Stock · Efficient · Mild OC · 2350 MHz (V620), or tune every value yourself.
  • 🪶 One tiny .exe. About 185 KB. No installer, no Python. It runs on the .NET Framework built into Windows 10 and 11.

3 steps. That's it.

1. Grab your firmware. GPU-Z → click the save icon next to BIOS Version, or run amdvbflash -s 0 card.rom. ⚠ It has to be the ROM from the exact card you're overclocking.

2. Load it and tune. Pick a preset or drag the sliders. The Pending Changes box shows exactly what will change before anything happens.

3. Click "Apply on this PC." Approve the admin prompt. Your card restarts with its new limits. (Prefer doing it by hand? "Export files" gives you a .reg, a PowerShell script, and a Linux pp_table.)

🔥 Read this before you chase 2350 MHz

These are passive server cards. No fan. They're built for server chassis that blast air straight through the heatsink.

2350 MHz on a V620 is NOT possible without proper cooling. In a normal case, the card hits its hotspot limit and throttles or crashes long before it gets there.

You need:

  • A blower or fan shroud forcing air through the card
  • Hotspot and memory temps on screen while you test (GPU-Z / HWiNFO)
  • Patience. Not every card hits the same clock. If it crashes, drop 25–50 MHz.

Memory overclockers: unstable VRAM doesn't always crash. It can quietly give wrong AI and compute results. Go up in small steps and test each one.

Robjørn warns you when you push into this territory. Listen to the Viking. 🪓

Compatibility (honest version)

Tested on (v1.0): test firmware built to AMD's own table layouts (the same definitions the Linux driver uses) for all three chip families. Loading, editing, export and SHA-256 checks all pass.

Real card dumps: ⏳ none verified yet. This is a preview release, which is where you come in. 👇

FormatBuilt forSame format, untested
Navi 21V620RX 6800 / 6800 XT / 6900 XT, Pro W6800
Navi 12V520, V540 (tune each GPU)RX 5500 to 5700 XT, Pro W5700
Vega 10V320V340, MI25, Vega 56/64, WX 9100

Not supported: Vega 20 (MI50 / Radeon VII), Navi 24, RDNA 3 (V710, RX 7000), RDNA 4, Polaris and older.

🙋 Help make it verified

If Robjørn runs well on your card, comment with:

  • Card model
  • BIOS part number
  • Table SHA-256 (from the app's Compatibility tab)

Every confirmed firmware gets added to the built-in verified list and shows ✓ Verified for everyone after you.

Download

-------> DOWNLOAD HERE

Verify it before you run it: certutil -hashfile Robjorn.exe SHA256 It should match: a2b914f628faafc85b5ca194f1b4da915b09594cb44a127a5cefdb3cd3ee0292

Windows SmartScreen may warn you the first time because the exe isn't code-signed. Source code is included in the zip.

Undo anytime

Click Remove overclock, or run apply_windows.ps1 -Remove as admin. On Linux, a reboot brings back stock.

Overclocking can make systems unstable and shorten hardware life. Robjørn never flashes your card. It only changes the power table the driver loads, but you use it at your own risk. Built-in limits (1250 mV, 1.5× stock power, 110 °C) stay on unless you unlock extended ranges.

Take from the datacenter. Give to the homelab. 🪓