r/RX8 • • Jun 17 '24

Meta For New and Potential Owners - Weekly

31 Upvotes

Hello and welcome to r/RX8!

If you are new here and are looking into getting an RX8 here are some extremely useful links:

Many basic issues are covered there, but it can be difficult getting answers to questions that might be less obvious, so if you still have questions after going through those links or if something is not as clear as it could be feel free to make your own post for the fastest response from the members here.

If you are posting about a car that you're interested in buying be sure to mention your location and the currency you're referencing!

Many posts just saying for example "4k" or "9k", 9k what?

Please be sure to follow the rules, and take a look at our posting guidelines here:


r/RX8 • • Jun 24 '24

/r/RX8 Is back open!

176 Upvotes

Some of you may have seen the previous mod locked the sub yesterday because he got *really* mad that someone argued with him.......

He attempted to completely lock down the sub by setting it to restricted and removing himself as a moderator, leaving only automod on the moderator list - I don't think he realized that would leave the sub completely open to an auto-approved takeover request, but here we are.

Sub is back open and has returned to regular posting permissions.


r/RX8 • • 2h ago

Prospective Owner 40th anniversary worth

3 Upvotes

Hey guys, a client of mine is selling a 2008 rx8 40th anniversary with 18k miles (30,000 km) it’s the dark grey on red interior and it’s in near perfect condition, has been sitting in a heated garage for about 2 years. 1 owner, no accidents, no dings. He offered it to me for 10,000$ CAD (initially asking 14k) which is about ($7000). I’d appreciate any advice if it’s worth it or not as I have to give an answer tonight

Many thanks in advance!!


r/RX8 • • 3h ago

Prospective Owner R3 - Anyone considering selling?

2 Upvotes

I've been bombing like every platform possible with annoying posts like this. Previous RX-8 owner and I really regret selling mine. I've had some positive changes in the job/financial realm and desperately want to buy an R3 (USA preferred, CA within possibility). Would consider most conditions if the car is drivable, very lucky to live within an hour of a reputable rotary specialist.


r/RX8 • • 8h ago

Maintenance Backfire when starting.

4 Upvotes

When i coldstart my Rx SE, sometimes it backfires starting. And once it did that 3 times in a row. 2 times not giving a little bit gas and one time just a little bit gas. When i tried flooding the engine, it started just like normal, quick and easy. Does someone know why, cus I have not a single clue.


r/RX8 • • 21h ago

Modding Screen for average speed and cruise control set speed

Thumbnail
gallery
25 Upvotes

Took me about 3 days to do. Stock ECU patched to send cruise set speed, the rest was already there and I just tuned in. Install is a pain because the screen is below the cluster face & not looking forward to do this again on my other 8.


r/RX8 • • 1d ago

Modding 13b Variable Intake Runners

Thumbnail gallery
19 Upvotes

r/RX8 • • 1d ago

Prospective Owner How do you like the alcantara Center console

Post image
25 Upvotes

r/RX8 • • 23h ago

Modding Supercharger vs turbo Rx8

7 Upvotes

Hey guys I’m building a rx8 R3, I understand that the turbo tech is better all around but for the guys that have super charged their car. How do you like it? What kinda power do you get it and what about torque? These rotaries are so dead on torque.


r/RX8 • • 22h ago

Maintenance Can anyone recognise the sound?

3 Upvotes

A new odd sound coming from the front corner of the car (uk passenger side). Only lasts a minute or two. Not the air pump, given the position. It seems to disappear with revving and/or warming up of the engine. Something oil related?

Although might be a coincidence, it has appeared with the temperatures dropping near 0c.

I changed oil pump 2 years / 15k miles ago.


r/RX8 • • 1d ago

Showoff New RX8

Thumbnail
gallery
183 Upvotes

Just picked my second rx8 since i made the big mistake of selling my previous one, glad to be back 🙌


r/RX8 • • 2d ago

Maintenance My RX8 pops and jolts a little under hard acceleration around 5000rpms, what could this be?

Post image
40 Upvotes

My RX8 recently has started popping and jolting a little under heavy acceleration around 5000rpms and I don’t know what the issue is. I’ve searched online and it said it could be faulty spark plugs or ignition coils. I plan to change my ignition coils this Friday because my RX8 has just hit around 34,000 miles. I may have did an oopsie because I changed my spark plugs 3 weeks ago without changing the wires😬. If you guys could provide any extra information this would be helpful.


r/RX8 • • 3d ago

Maintenance Winter is coming, how do I prep my RX-8 for storage outside?

9 Upvotes

Winter is coming, and here in Germany (Brandenburg) the roads get salted. My 2006 RX-8 (Shinka) is the car that makes me smile, and it already has some rust problems on the underbody. To preserve it, I got it a seasonal 04/10 plate, so it’s allowed to drive from April to the end of October on public roads.

Unfortunately I only have a carport, so it’ll be out in the cold all winter. Which tend to be very humid, so rust will probably get worse anyways? :(

This is my first time storing a car over winter. I’ve tried to read up on it, but I couldn’t find much about storing a rotary. Most of what I found was about regular cars and the "advice" often contradicts itself. That’s why I’m asking here.

What I’ve done so far:

  • Ordered tire savers to prevent flat spots
  • Got a charger to keep the battery topped up

Is there anything else I need to do before or during storage? For example, should I start the engine once a month and let it run for about 20 minutes, or is that a bad idea? I have very little clue. :/

Thanks in advance!

// Here’s a photo of the carport where it’ll be parked. It’s a bit messy I know... :c

A Happy Little Boy sitting in his port

r/RX8 • • 3d ago

General a place where owning an rx8 would cost an arm and a leg

Post image
6 Upvotes

IYKYK


r/RX8 • • 3d ago

Showoff RotaryStock in ElMonte

Thumbnail
gallery
60 Upvotes

Not many of us today, but had fun. Hopefully they hold actual sevenstock next year


r/RX8 • • 3d ago

General 2005 RX-8 low compression. Rebuild my engine?

6 Upvotes

I'm looking for some second opinions.

I have an RX-8 with a 13B-MSP Renesis that supposedly has approximately 20,000 miles on a remanufactured block.

I didn't get paperwork or compression test oh well sue me 😔. $8,000 got me a clean 60,000 miles chassis car with supposedly 8,000 miles on the block. it now has 76,000 chassis and ~20k miles on the supposedly second engine

The car actually drove and drives great. Pulls strongly at higher RPM, and idles smoothly, but I've been having some issues.

The tester showed approximately 291 RPM (brand new battery), and I recorded the ALT readings.

Front rotor: - Chamber 1: 6.3, 5.9, 5.6 bar

  • Chamber 2: 6.2, 6.0, 5.7 bar
  • Chamber 3: 6.0, 5.7, 5.9 bar
  • Average: 5.92 bar

Rear rotor: - Chamber 1: 5.9, 5.7, 5.5 bar

  • Chamber 2: 5.8, 5.7, 5.7 bar
  • Chamber 3: 5.8, 5.7, 5.8 bar - Average: 5.73 bar

My understanding is that Mazda's factory minimum is approximately 6.8 bar corrected to 250 RPM, which would put both rotors below specification.

  • The engine takes longer than normal to start, both hot and cold. It gradually catches, then idles normally......I believe this to be ignition related, didn't start doing this, and the sluggish starts till bhr coils...

- It has some sluggishness under low-RPM load, particularly pulling away in first gear.

- It comes alive at higher RPM and otherwise drives surprisingly well.

- I previously experienced a P0301 misfire under load.

- I traced that misfire to a BHR ignition coil issue through substitution testing. With OEM coils installed on both front-rotor positions, the misfire disappeared. The rear still has BHR coils. I'm currently waiting on a replacement set. I don't have the other 2 OEM coils

  1. Do these compression numbers indicate that a rebuild is necessary, assuming the ALT readings are correctly calibrated to 250 RPM?
  2. Is it possible it can still drive as well as it does with those readings?

r/RX8 • • 3d ago

New Owner Chicagoland/ Suburbs mechanics

2 Upvotes

Hello everyone! I was wondering if anyone knows a reliable and trustworthy mechanic who knows their way around a rotary engine for my 2004 rx8. I got it not too long ago and I want to have some work done on it before winter hits.
Thank you for any help!


r/RX8 • • 4d ago

Maintenance Slipping clutch or....?

3 Upvotes

EDIT#2: Just drove it and noticed it happens below 3k rpm as well. So it's not just at 3k rpm.

Hey guys, yesterday my 8 started to do some weird stuff. When accelerating in like 1st or 2nd gear, around 3k rpm, it feels like there is a very slight hesitation or slipping or gently holding it back. It was raining so I thought the tires might be slipping at first, but it continued in the dry later. I don't even know if I would call it hesitation but it feels weird. Like a minor lag in the rpm range. But just in the 3k range. Everywhere else is fine. I never experienced a slipping clutch so I wouldn't know what that feels like. Also this clutch has less than 10k miles on it and I never abused it. No big rpm drops off the line. But lots of stop and go driving in NYC traffic. It's an exedy clutch with an act flywheel. I tried what Google suggested, to floor the gas pedal in high gear and to see if the rpms will go up alot to see if the clutch is slipping but rpms stayed steady. Could this be air in the system. I do have some sweat coming from the master cylinder next to the clutch pedal. Do these symptoms sound like that might be it? I ran codes, but only secondary air pump came up which I will be addressing shortly. Thanks guys. Edit: I should add that the motor and ignition parts all have less than 10k on them. Ngk plugs with mazda coils. Cat is high flow with same mileage


r/RX8 • • 4d ago

Memes Rotor got a little hungry

Post image
21 Upvotes

r/RX8 • • 5d ago

Modding Rust removing and evap system delete

16 Upvotes

I stripped down my 8 to bare shell and replaced the sills and rear quarter panels and now i am debating how to deal with all the surface rust and what to modify and prepare for my swap what mods do you think i should do and how do i delete the evap system since I don’t need it just cap the fuel tank with a small filter and call it a day?


r/RX8 • • 4d ago

General Anyone in Houston or near now how to lap irons ??

1 Upvotes

Rebuilding my first 13 b and the irons look like they’ve gotten hot af. If anyone knows how to lmk I can pay and also want to learn.


r/RX8 • • 4d ago

Maintenance Help sourcing an S2 rear diff

2 Upvotes

My rear differential grenaded itself yesterday. I'm seeing roughly $4k+ for a new one from Mazda. I know S2s weren't common so hoping someone here might had a lead on a used one​


r/RX8 • • 6d ago

General Fresh rebuild

Thumbnail
gallery
209 Upvotes

So happy to finally have her back. Shout out to Rotary Engine Works LLC and Josh Saucier for bringing her back to life!


r/RX8 • • 6d ago

Showoff Mazdaspeed x Shinka

Thumbnail
gallery
412 Upvotes

Mazda who hurt you 😭