Hello guys,
I recently purchased a small sample of uraninite from the Czech Republic at a mineral fair. Apart from its plastic case, the sample was wrapped in newspaper (the one you can see in the pictures) and placed inside a plastic bag.
A while ago, I had purchased an FNARSI GC-01 (equipped with an M4011 tube and RadPro installed), but I had never really found anything "spicy" to test it on. When I laid eyes on this rock, I made an impulsive decision to buy it.
The fair was quite far from home, about a full day's trip. I knew very little about minerals, so after doing some reading on Reddit, I figured that the main precaution I needed to take was to avoid inhaling any dust.
After a long day of walking and travelling by train (with the ore in my backpack), I eventually drove home, keeping the rock in the trunk of my car.
The following day, I showed it to a coworker (we had actually bought our Geiger counters together). We were outside, in the parking lot, with the rock on the trunk of my car. I removed the newspaper wrapping, but the sample remained inside its plastic case. I also checked the trunk with my Geiger counter, and everything seemed fine.
So far, so good.
Later that day, when I got home, I decided it was time to put the sample into long-term storage. I unwrapped it and prepared to transfer it into a metal container with an airtight silicone seal (originally designed for keeping food warm).
However, when I touched the plastic case, I noticed what seemed to be a fine powder on its surface. I assume it might have been generated by all the bumps and vibrations during the journey and possibly found its way through the case's seal.
At that point, I started to panic.
I placed the rock inside the metal container and then tried to clean my hands and everything I had touched using disposable wipes I had in my car. I stored the container in my basement, together with a photograph I had also purchased at the fair and which had been inside the same plastic bag.
As soon as I got back inside, I went straight to the sink, washed my hands, took a shower and put all my clothes in the washing machine.
Then I suddenly remembered that I hadn't cleaned my car keys with the wipes. I checked them with my Geiger counter and got a reading of approximately 1.3 µSv/h (the detector should be quite sensitive to beta radiation). I washed the keys, checked them again, and the readings were back to normal.
I then scanned my entire home, and everything was reading around 0.2 µSv/h.
Now, here are my questions:
- How much of this powder could I potentially have been exposed to? Could this pose a health risk?
- Should I scan my entire car and clean anything that reads even slightly above background levels?
- Should I also clean the photographs and the outside of the metal container?
I'm sorry for the long story. Unfortunately, I suffer from OCD, and this situation has been causing me a great deal of stress. I'm finding it difficult to stop worrying about possible contamination.
Thank you very much to anyone willing to share their knowledge and advice!