r/RetroArch • • Aug 19 '26

New Android Play Store changes

31 Upvotes

As explained in the FAQ, about 5 years ago, Google implemented a requirement that all apps in the Play Store must conform to their Storage Access Framework API. At the time, there was no good way for us to do so, and even if we could, it would severely limit how we could interact with the filesystem. Since then, we have not been allowed to update the versions on the Play Store (or the cores they use), so we left them alone and recommended everyone sideload the apk from our website.

Fast-forward to the past few months (at the time of this writing) and Google says they're going to remove "old" programs from the Play Store entirely, and they're already hiding the app from many newer devices. One of our contributors took it on to get it in-line with the Play Store policies, since having an up-to-date-but-restricted release would be preferable to no app at all.

-------------------------------------------------------------------------

Q: What's changed?

A: Lots of stuff. Too much to list. 5 years of updates.

-------------------------------------------------------------------------

Q: All of my stuff has been deleted!

A: Nothing has been deleted, but the updated RetroArch is probably looking in different locations now, and it probably can't see the old locations if you try to change them back. The sideload-able apk from our website and/or the version from F-Droid or other non-Google storefronts should still be roughly similar to the old Play Store version in what locations it can access, so you could try switching to it instead.

You can also migrate your old data to the new locations. In the old version, all of the files are kept in the root of the device (often /storage/emulated/0/) in a folder called RetroAarch. In order to use them with the new play version, you can connect your phone to a PC and copy the files from (/storage/emulated/0)/RetroAarch to the new location at /media/com.retroarch/RetroArch (or /media/com.retroarch.aarch64/RetroArch if plus version).

-------------------------------------------------------------------------

Q: I moved all of my savestates to the new location (or switched to the sideload apk) but the savestates won't load!

A: Savestates are extremely volatile and are rendered incompatible by even minor changes to the emulated hardware. This makes them incompatible with other cores for the same system, and even sometimes with other versions of the same core. A lot of updates have happened in 5 years, and I would guess few if any up-to-date cores can load savestates made with a 5-yr-old core.

-------------------------------------------------------------------------

Q: What's with all of these cores? I don't want them.

A: Go to settings > core > manage > [corename] > delete.

-------------------------------------------------------------------------

Q: I don't see my favorite core in the online updater anymore!

A: The Play Store imposes strict limits on the number of cores we can make available through the app (more for the Plus version, but still limited), and we replaced a few that were available in the old version to match our other storefront releases (notably: MAMEs). You can still add arbitrary cores by downloading them manually from the buildbot webserver (in the subdir for your device's architecture) and then moving it somewhere RetroArch can see it, then using the 'install or restore a core' routine found in the 'load core' menu.

-------------------------------------------------------------------------

Q: Since updating, I'm getting a lot of crashes when I...

A: Please send the automated crash reports whenever possible. These go directly to us and are very helpful for pinning down and fixing this sort of thing. You can also make threads here, but please make sure you include logs and information about your device/system/environment so we can try to help you.

-------------------------------------------------------------------------

Q: Okay, nevermind, just give me a copy of the old version and all those old cores and I'll keep using them forever.

A: We don't have that.

-------------------------------------------------------------------------


r/RetroArch • • Jul 28 '23 Take My Silver

Technical Support: SOLVED FAQ: READ THESE BEFORE ASKING

149 Upvotes

This post will include common questions and their answers. If you came to this sub to ask a support question, please read/search through these before asking. If you ask a question that is already answered here, your post may be locked or deleted.

If you would like to suggest something be added to the FAQ, please use modmail, as I do not want this post to turn into a support free-for-all nor do I want a million public "please add this to the FAQ" posts/comments.


r/RetroArch • • 15h ago

Showcase Literally accidentally made a drunk driving simulator shader or lsd shader or something idk .. hahah oh wow 😳 labelling nsfw just incase NSFW

Thumbnail gallery
20 Upvotes

It's so trippy everything moves around like crazy warping... Got 2 version rn.. like it's a drunk driving almost can't react like under influence shader thing.. quite cool really should I make them public? More fun for friend challenges but not gaming probably 🤔


r/RetroArch • • 9h ago

I got Sonic running against three real recorded runs inside the original game

4 Upvotes

This is something I've wanted to do with old games for years.

Each ghost is a real recorded playthrough, replayed by its own emulator instance and displayed alongside the current player.
https://www.youtube.com/watch?v=Sgw8_IN3PNY

No scripted AI, no approximate trajectories, and no changes to the original ROM.

Here I'm racing through Green Hill Zone against three previous runs.

I'm developing this for NelfePlay, using RetroBat and a custom replay system.

Has anyone tried a similar approach with multiple emulator instances?


r/RetroArch • • 9h ago

Retro Achievements on Retroarch on PS5

Thumbnail reddit.com
0 Upvotes

r/RetroArch • • 21h ago

Technical Support: SOLVED PSA: If RetroArch 1.22.2 is opening as a tiny window for you, it's an issue with the way Wayland support was changed.

Thumbnail reddit.com
6 Upvotes

r/RetroArch • • 13h ago

Technical Support Unable to View Downloads

1 Upvotes

Currently using the TestFlight version on the iPhone Duo, and I can no longer see games I have downloaded through the app. They're still present, visible in my phone's file browser, and I had been playing earlier in the day.


r/RetroArch • • 21h ago

Technical Support How to fix lag on certain NES titles

1 Upvotes

Hello! I'm using Mesen on my Retroid Nova to play Kirby's Adventure and Megaman, but the lag is significant and there's often an issue where the left side of the screen scrolls weird as I move to the right.

I don't have this issue on other titles such as Mario 3 or Dracula's Curse.

Is there a way to fix this?


r/RetroArch • • 1d ago

Technical Support Retroarch reports wrong resolution

Post image
1 Upvotes

For reference, display 1 is my laptop display and it's a 1920x1200 panel. Display 6 is my external monitor and its resolution is correct


r/RetroArch • • 1d ago

Gameboy shader

1 Upvotes

I'm having trouble deciding which shader to use, any recommendations?


r/RetroArch • • 1d ago

Discussion About Stella core and mouse support.

4 Upvotes

Now Stella core allow the use of mouse devices, and it include spinners and trackballs that are recognized as mouses. The thing is, spinner games were you move something horizontally work normally with the X axis, but spinner games were you move something vertically, like Bachelor Party, the X axis won't work, but the Y axis will.

Why is that? Atari 2600 spinner only had 1 axis, now Stella core change the axis according to the game and it make spinner devices useless on vertical moving spinner games. It would be even easier to keep just the X axis working for all games. Maybe the Stella team was focusing on mouse users and wanted it to be more intuitive but it screw actual spinner users.

A option to use the X axis even on vertical spinner games should exist. Atari paddles didn't have 2 axis after all.


r/RetroArch • • 1d ago

Technical Support Controller disconnecting/reconnecting during stutter/lag

1 Upvotes

Having a handful of issues with a new PC build, this is just one of them. To starts, main specs are:

CPU - Intel Ultra 5 250K Plus
Motherboard - Gigabyte B860 DS3H WiFi 6E rev 1.3
GPU - PowerColor 9060 XT 16 GB
RAM - 32GB DDR5

I was playing Dig Dug on Mesen and during some lag when a lot was happening on-screen, my controller disconnected and reconnected. It showed the pop-up notification like 4 times. In the end, the controller is still connected, but not sure why this may be happening?

I have an 8BitDo Ultimate 3-mode. It was connected via 2.4ghz dongle, so I tried hardwiring via USB and I specifically connected it to my motherboard IO rather than the front panel and it still happened again later.

This is the same controller that I was using on a Dell Optiplex 3050 that was connected to my TV and I didn't have this issue on that PC.

This problem is not happening when playing other games on the PC outside of RetroArch.

I can't discern if this is an issue with the computer (since it didnt happen on the Optiplex) or an issue with RetroArch (since it's not happening with other games). Any help is appreciated.


r/RetroArch • • 1d ago

Technical Support retropad help: how to add or replace a key to the number 9 key?

0 Upvotes

theres a specific game i want to be able to play called yume nikki on rpgmaker etc, i am able to load the core and do everything but i am simply not able to enjoy the game, the retropad that retroarch gives you doesnt have the 9 key, all other keys are replaced seamlessly and are fine, but it's just that one single key that makes me unable to progress further into the game without saving and i automatically restarted with no progress saved due to me unable to save in the game itself as i am unable to wake up, im wondering how to add a keybind or even replace a button or key (?) to the number 9, i apologize if my wording sucks, its hard to explain if you aren't aware of yume nikki already... :,)


r/RetroArch • • 1d ago

Activating Native Steam Controller Support in Retroarch

Post image
0 Upvotes

Crosspost of the solution to an issue for Steam Controller owners like me.


r/RetroArch • • 1d ago

Technical Support Visual bug with Ocarina of Time

0 Upvotes

I've been struggling for about 1 or 2 hours trying to find a working rom for Ocarina of Time for N64, one set of roms had a few missing textures in the shape of black squares and I couldn't even see the starting menu because it was just a black screen. The other set of roms had a specific issue where the game's visuals would freeze when trying to access the inventory, and they wouldn't revert back as I exited the menu (the sounds played as it was pulled up and away).

Idk how to fix either problem, and I got fairly frustrated, so I stopped.

Anyway, some help would be greatly appreciated.


r/RetroArch • • 2d ago

First Time emulating on Android

Post image
10 Upvotes

r/RetroArch • • 1d ago

How do you use the newer Steam Controller with Retroarch?

Thumbnail reddit.com
1 Upvotes

r/RetroArch • • 1d ago

I'm losing my mind

0 Upvotes

so I have been trying for two days to get the right retroarch msix for my xbox one s, but the device portal keeps giving me the not compatible error. I have tried the vs one, the uwp one and the xbox one (all signed) but nothing seems to be compatible with my device (yes I have also tried private github versions, nothing is working. any suggestions?


r/RetroArch • • 1d ago

Retro gaming

0 Upvotes

Hey everyone!

I'm a retro gaming enthusiast who enjoys playing classic games through emulation.

I use RetroArch to revisit games from different generations and platforms. I also enjoy unlocking achievements through RetroAchievements.

I'm always happy to discover new games and connect with other retro gaming fans!

What are your favorite games to play on RetroArch?

Cheers!

RetroAchievements profile


r/RetroArch • • 1d ago

Discussion Saw 3DS emulator core in menu. Would it work for Pokemon US and X?

0 Upvotes

Saw a 3DS core in the core menu for downloading and I was wondering if it works


r/RetroArch • • 2d ago

Technical Support Help with netplay issues

1 Upvotes

So tried some testing between myself and a friend. Both on windows machines, we have around 20ms when we ping each other in CMD. On RetroArch however, it jumps up to around 32ms on average. Is this expected?

Also sometimes we get spikes of lag that's pretty consistent when we play. I assume perhaps its the software trying to keep the both of us in sync. Is there a way to minimise these spikes of lag, and make the experience better? Any settings I could experiment with? We both have very fast wired connections.


r/RetroArch • • 2d ago

Technical Support Sega Genesis Plus crashes when loading rom

2 Upvotes

Here is the log: https://pastebin.com/PB22QrdA

It includes both the retroarch crash log and the reliability monitor information.
Some other information:
- I"m running RetroArch on Windows 10
- If I run the rom on 'Sega Genesis Plus (Wide)' the game runs fine, only issue is outside the 4:3 ratio video box of the game, on the left hand side random pixel blocks appear during in-game mode (ie when I'm playing it)
- I've tried to redownload the 'Sega Genesis Plus' core, used 'Update Installed Cores', it continues to crash, also renamed the 'Sega Genesis Plus' core from .dll to .old, then dowloaded the core again, but it crashes.
- tried several games (Midnight Resistance, Speedball 2, Sonic the Hedgehog 2), they all crash.
- by crash I mean: I will load content, the game then the retroarch logo will appear, and there seems to be a pause and then the application will close.

Please help, thank you


r/RetroArch • • 2d ago

Technical Support So it's anybody having trouble with N64 cores just recently?

0 Upvotes

I wanted to play Zelda Ocarina of Time, and I want retroarch because of the amazing shaders, actually I played the game just like a month before and it worked fine, pretty sure I was using ParaLLEi it's the predetermined I have, the other two when I tried to use it go slow, ParaLLEi works fine, but now it has problems on the texture, sounds a little weird and the worst part, open the menu on the game (the thing you do a lot to select items) takes a lot of time, I press start and the game freeze the image, looks like the game just freeze or it's gonna crash, wait like 5 seconds and then the menu open, It's just unplayable.

It's not even my device nor the shaders (all of this it's without shaders) because the game before worked just fine so idk, if someone it's having a similar problem or something, maybe I need to adjust something with the core but with many options I tried and don't appear to help.

I know I can play the game too with the port people made but I was sad when I see the port doesn't include options to make the game look nicer (not talking about making the game look HD), more CRT N64 like retroarch does


r/RetroArch • • 2d ago

parallei n64 doesn't load retroachievements with zipped games

0 Upvotes

mupen and emun64 it works fine, parallei it needs to be unzipped for some reason. is there a fix?