r/RevitForum • • 1h ago

Is there a way to freely rotate the Spot Elevation symbol?

1 Upvotes

Hi everyone!

I have a question about Revit and was wondering if there is a way to solve this issue.

I'm working on a project where the site is rotated relative to the project's original north orientation. When placing a Spot Elevation, I noticed that the symbol and text always follow the default orientation of the project's axes, remaining aligned with the X-axis of the 2D view.

The problem is that, since my site is rotated, I'd like to be able to freely rotate the Spot Elevation symbol so that it follows the same orientation as the site, making the annotations look cleaner and more consistent with the drawing.

Is there any way to freely rotate a Spot Elevation independently of the project's axis orientation?

I find it a little frustrating that such a basic annotation seems to have this limitation, if there really isn't a native way to do it.

I've attached an image to illustrate what I'm trying to achieve.

Does anyone know of a setting, family adjustment, or workaround that could make this possible?


r/RevitForum • • 8h ago

Modeling Techniques Residential Revit

Thumbnail reddit.com
2 Upvotes

r/RevitForum • • 20h ago

Troubleshooting Room Boundaries

0 Upvotes

In my project I need to place rooms, with dynamic room boundaries. For example, in the interior the boundaries should be in the middle of wall. On the facade walls the boundaries should be on finish, on curtain walls on the face.

I tried doing this by setting global boundary rule to wall finishes, turning off room bounding for interior walls and using room separators in the middle of them. But this kind of workflow is inconsistent because room separators for whatever reason snap to the middle of wall centerlines (which is pain for joints). I'm looking for ideas and workarounds/correct way of doing this.


r/RevitForum • • 1d ago

*Crossposted* Revit project sheet and drawing questions

Thumbnail reddit.com
0 Upvotes

r/RevitForum • • 1d ago

Revit LT vs Revit

3 Upvotes

Hey there folks!

Just here looking for some advice.

Over the past two winters I've been taking some online courses that focus on Revit. (SAIT out of Alberta but closely follow John Stines Design Integration textbook). I have found it very useful and am getting relatively decent at flowing through Revit and making some basic designs while going through work flows and trying to sequence things properly.

My current situation is that I am a Carpenter hoping to be able to provide Residential Designs for my own builds, and for other people in my community as well. As I dive deeper into Revit, I'm realizing more and more that the full program offers much more than I'll ever need and at its price point it doesn't feel super realistic.

I have also purchased the John Stines Residential Design textbook, but have yet to find the time to complete it. This will be my focus after I finish this course work I am taking.

I suppose my questions are, Is Revit LT worth it? Might there be better design program options for what I intend to use it for? The few things that are getting my hung up on it are some of the tools that don't come with Revit LT. I would like to be able to show some structural framing in my designs, trusses and things like that. Is there ways to do this in Revit LT. Can I produce high quality residential designs with this program?

Any advice greatly appreciated.

Thank you!


r/RevitForum • • 2d ago

how do you reissue spool sheets so the shop knows what changed?

0 Upvotes

We batch spool sheets out of MSUITE BIM. Detailing changes 6 spools out of 200, we reissue the whole set, and the shop can't tell which sheets are new and which they already built off.

What we've tried so far:

- revision clouds plus updating the revision in the title block

- separate REV package with only the changed spools

- one-page change log on top of the package. Foreman read it the first week and then stopped

Next I'm going to try printing the revision on the spool label and having the old sheet come back to the office when the new one goes out. Anyone have a spool sheet revision process the shop actually follows?


r/RevitForum • • 2d ago

Troubleshooting Rebar in revit

Thumbnail
gallery
3 Upvotes

When I set a value in la and lb of top bar of beam using naviate, there seems to be a problem, that the rebar can't be moved like in the first photo, even the arrow sign don't show up.

Does anyone know what might be the problem and how to fix this ?


r/RevitForum • • 4d ago

Templates Startup File

0 Upvotes

Hi everyone, I’m looking for a solid starting Revit template or rvt with nested components tailored for new single-family residential projects in the US Midwest. If anyone has a starter file they’d be willing to share—or recommendations for a good one to download—I would really appreciate it. Having to tweak the same settings from scratch every time I start a new project is getting a little tedious! Thanks in advance.


r/RevitForum • • 4d ago

could someone help me navigate revit

Post image
2 Upvotes

r/RevitForum • • 4d ago

Need help fixing "You no longer have access to Revit" / "Connect to the Internet" errors

Thumbnail
gallery
1 Upvotes

Hi everyone,

I’m running into a licensing issue with Autodesk Revit and could really use some help troubleshooting it.

When I try to open my project, I get a pop-up saying: "You no longer have access to Revit. The Revit license you're using is not valid. Your access to the software has been blocked."

I also get another prompt saying: "Connect to the Internet. You must go online to continue. Please connect now."—even though my internet connection is working fine.

Here is what I am currently using:

  • Revit Version: Revit 2024
  • What I've tried so far: [e.g., Restarting my PC, checking my internet connection

Has anyone else dealt with this? How can I get Revit to recognize my license and let me back into my files?

Thanks in advance for any advice!


r/RevitForum • • 5d ago

Families for Water treatment and sewage water treatment plants

3 Upvotes

Good day, modelers and engineers

I am kindly looking for any website or drive where i can download generic WTP & SWTP equipment families for my design models. Mainly clarifiers, UF filters, Rapid sand filters etc

I appreciate any assistance you can provide.


r/RevitForum • • 6d ago

Troubleshooting Semi-Transparent Ceiling and links help.

0 Upvotes

We have a few ceilings modelled in our apartments and on every view they seem to be semi transparent, even though we haven't changed the graphics. how do i stop this happening?

also how can I make a link be always loaded in but hidden in all views by default so we dont have to manually close them


r/RevitForum • • 7d ago

Doors in Revit

1 Upvotes

Can someone help me step by step or give me at least general knowledge on how to make a family door revit


r/RevitForum • • 7d ago

Roof Cricket Help

3 Upvotes

Ive been reading the original post,

(1. Sketch main roof.
2. Sketch Cricket.
3. Move cricket up or down until it intersects main roof (use offsets).
4. Join Geometry.
5. Shape edit cricket.
6. Snap lower points (as many as they are) to main roof surface (if youve done the above correctly, they snap perfectly)
7. Raise high point until spot slope reads required slope.)

but its not really helping me figure out this specific cricket. main roof slopes 1/4"/12". the parapet needs a cricket that has a ridge, but it also needs 2 valleys. All while maintaining 1/4"/12" slope at the cricket


r/RevitForum • • 7d ago

Identify a model by ID through the API

1 Upvotes

Hello,

Is there a reliable way to identify a central model by an id?

Lets say

user A is working on a central file on revitserver/ACC in his own local file
User B is also working on a local copy of that central file

How can i tell that these two users are working on the same central file, preferably with something that persists when moving the central file (Central file is saved into a new directory and user A opens a local copy from there, can i tell it's the same model as before but a different location)

Thanks in advance


r/RevitForum • • 8d ago

MCP and Revit

8 Upvotes

Ok. This is controversial.

Any one else using MCP through say PyRevit to drive Revit?

I am sorry but there is no way that Autodesk can keep up with it's own AI integration.

I know autodesk offers more "secure" and tested Integrations with updates.

But man there is no keeping up with using the likes of Claude. Where you can write a task and it will create its own code/ python scripts to implement via PyRevit.

The world is your oyster with what you can command it to do now

Also it's going to change the industry in terms of drafting needs. What took me hours to produce can be done in 10mins.


r/RevitForum • • 10d ago

How can i hide in view, the points of a grid surface

0 Upvotes

I made this in conceptual metric mass, and i want to put in a arquitecture project, but in the plans, 3d, sections, etc; i want to only see de solid objetc whitout any grids or extra lines. Can you help me please?


r/RevitForum • • 11d ago

Curtain Wall Door Panels

Thumbnail reddit.com
1 Upvotes

r/RevitForum • • 12d ago

Why do my 3D views keeping showing way off to the side?

Post image
1 Upvotes

I’m helping finish a project model that was started with an old model, with a whole bunch of previous stuff in it (adjacent buildings from previous projects). Every time I create a new 3D view of the current building, the cropped view shows up way off to the right. When I place it on a sheet, the outline is WAY bigger to the left of the actual view’s crop region.

There’s something over near the center of the old model that’s causing it but I can’t figure out what. I tried setting up a similar scenario in a new model, but 3D views there work fine. I thought I had something to do with survey and base point locations, but that doesn’t seem to be affecting anything in my test model.


r/RevitForum • • 13d ago

Wall Finishes by each room in revit schedule

0 Upvotes

Hi everyone, hope you are all good.

Does anyone here knows if there is a practical/quick way to add wall finishes by each room in revit schedule? I searched, but only find that it is possible with Dynamo and i've never used it, also i think it would take time


r/RevitForum • • 13d ago

Moving project level datum

2 Upvotes

I'm not in this model everyday and had others set it up. We just began the CD phase and noticed our basement level is set to 100'-0" while our level 1 is set at 112'-0". Level one needs to be at 100'-0" and the basement at 88'. We are using shared coordinates and have a linked site model so we can report the civil coordinates.

What is the best way to adjust the levels how I need them, at this stage in the project? Who knows if things are correctly constrained and MEP is pretty far along.


r/RevitForum • • 13d ago

Advice on dropping Revit back to LT version - after 20years

Thumbnail reddit.com
3 Upvotes

r/RevitForum • • 14d ago

Content Creation Parametric ceilings in Revit- Creating ceiling that mimics Louvre, Abu Dhabi

2 Upvotes

I'm trying to build a ceiling that mimics the style of the Louvre Abu Dhabi but I'm having a hard time finding youtube videos that aren't blurry or that I can understand/follow along to make parametric ceilings. Can someone please just write down the few steps I have to take in the beginning to create this type of ceiling? Like can I start with my floor plan, or do I open a new RCP or new family? I can figure out the rest I just cant figure out how to begin because my mind is also scattered from all the assignments this semester and my job and I am panicking.


r/RevitForum • • 15d ago

HOW TO REMOVE THE SYMBOL FROM UNICODE CHARACTERS... THIS SHOWS WHEN I EXPORTED MY FILE INTO PDF, NOW I HAVE NO CLUE HOW TO REMOVE IT

0 Upvotes