r/Revolvers • • 2h ago

WGW: Grail Acquired

Post image
59 Upvotes

I’ve wanted a 3” 624 for about a decade now. I finally managed to find one at a reasonable-ish price at a time when I had the money to spend and the inclination to spend it.

Now I have to get set up to reload yet another weirdo Revolver Degenerate caliber because paying 80 cents to a dollar per trigger pull is for the birds.

Oh, and of course I need a carry holster for this thing. Fortunately, Problem Solving Tool went live with their N-frame MCG on Monday so I ordered one with the quickness.


r/Revolvers • • 4h ago

WGW year of 1972

Post image
65 Upvotes

We have a model 36 3inch barrel (chiefs special) and a model 67 (combat masterpiece) - Originally adopted widely by law enforcement and security agencies as a corrosion-resistant, low-maintenance duty sidearm before .357 K and L frames took over.


r/Revolvers • • 9h ago

5, 6, 7, and 8 shot

Post image
99 Upvotes

r/Revolvers • • 5h ago

WGW - LCR & 942

Post image
41 Upvotes

My current revolver lineup consists of the Ruger LCR and Taurus 942. I’ve shot thousands of rounds this year, and these are two of my favorite .22 LR firearms.

The next additions will be the S&W 617-6 and either the Ruger Wrangler or Super Wrangler.


r/Revolvers • • 37m ago

Celebrating my first WGW with my Charter Arms Undercover .38

Post image
13 Upvotes

This thing is a “hand me down” that was originally purchased 16 years ago. I sent it in to Charter Arms for what I suspected was a timing issue that I had noticed and they fixed a boatload of stuff under warranty.

What was replaced: Firing pin, firing pin spring, cylinder release screw, hand,
cylinder stop, cylinder stop plunger, cylinder stop spring.

The hand was defective which is what caused the timing issue. Along with fixing everything mentioned, it appears they may have even cleaned it more than I did—and from the time it left my hands to the time I got it back, only 11 days had gone by.

I know these are not the most high end revolvers, but Charter Arms has done right by me with this experience. Happy wheel gun wednesday!


r/Revolvers • • 3h ago

WGW - sinister noir.

Thumbnail
gallery
17 Upvotes

Making my Model19-10 look a bit more menacing. This is my favorite firearm and is largely why I’ve gotten into reloading. Since buying it in May, I’ve shot ~ 1100 rounds through it and probably dry fired with snap caps another 2000 times. The trigger has smoothed out nicely.


r/Revolvers • • 8h ago

Wgw

Post image
29 Upvotes

Just in case a moose or bear wants to start some shit while I'm hunting


r/Revolvers • • 6h ago

Wheelgun Wednesday

Thumbnail gallery
22 Upvotes

I still think this one’s my favorite. Definitely don’t shoot it enough. What’s your favorite wheelgun?


r/Revolvers • • 15h ago

Help me value this revolver

Thumbnail
gallery
92 Upvotes

Hey all. This is a follow up post. My buddy offered to sell me his S&W 27-2 6”. He allowed me to take it home, open it up and inspect it, as well as shoot it. It shoots well and feels nice. I fully disassembled and reassembled it, cleaning and greasing every necessary component in order to have an accurate representation of it. He does have the original case and the paperwork for it. Although it’s dirty and a little worn out if that matters. There is some rust on certain parts that would not come off. There is also a chunk missing from the grip. I am not sure about the rifling. It’s there but not as proeminent as my AR’s.

I am completely new to revolvers but not new to guns. Please help me put a value to this gun as I see online prices all over the place. He said he paid $1200 for it used many years ago, but didn’t put a price on it. He asked me to make him an offer. I really like this gun but don’t know what it’s worth. I’m sure you guys can help.

Thank you in advance.


r/Revolvers • • 8h ago

Colt Single Action Frontier Scout & 642 rough values

Thumbnail
gallery
17 Upvotes

I’m trying to ballpark some values for a neighbor that is looking to part with some firearms. Two things he’s going to let go of are a never fired 2009 build 642-2 still in the box and the much more interesting 1959 Colt Single Action Frontier Scout in .22 magnum.

As for the 642, it’s a run of the mill air weight with zero miles on it, still in the original box with everything. Unfortunately it’s a 2009 mfr date and has the lock, so besides a modest increase in value from all it comes with I’m guessing it’s prob worth about $350-$400. I actually am interested in buying this to pair with my 640 but want to offer him a fair price.

As for the Colt, it has some mild wear from normal use but not much at all. With the F suffix serial number, Colt dates it as a 1959 model. It’s in .22 magnum and I don’t believe it came with a .22LR cylinder given the year. Black plastic scales. I don’t believe he has the box. What would be a reasonable price for this? I’m interested in buying it from him and while he said he’d give me a buddy price, he has no idea on the value and I want to be fair with him. Resources online put these things anywhere from $700 up to $1200 and appear to be quite the collector pieces.


r/Revolvers • • 6h ago

WGW

Post image
11 Upvotes

If you've read this series you'd understand why the book is in the pic.


r/Revolvers • • 3h ago

Great tips for snubnose use

6 Upvotes

Ray Bennett offers good counsel here. My own snubnose of choice is a classic Charter Arms Undercover .32 from about 1980. I keep it loaded with full wadcutters.

https://youtu.be/QuAdO0OqObw?si=tkWTolM8VyAc399y


r/Revolvers • • 4h ago

Magnum snubnose shooting grip advice

4 Upvotes

(Post has only been edited to correct typos)

I cut my pistol teeth on semi autos like the Beretta 92 FS and the Glock 22 Gen 5. I tried several small pistols as well, like a Taurus Spectrum 380 and a Kahr Arms PM40. Started adding some small frame revolvers to my EDC options over the last year or two. I've owned a couple decent 38 Special models, but recently decided to step up to a 5-shot .357 Mag.

So far I've only shot Hornady CD 125 grain FTX rounds, and Winchester Silvertip 145 grain rounds. I switched the small rubber OEM grips out for a Hogue rubber monogrip. Shooting so far has been ok, but I wonder if there are some good tips on gripping the gun better. I could get away with a grip similar to how I grip my semi autos while I shot 38 special (obviously not laying my support hand thumb past the cylinder gap). But with Magnum loads, I clearly need to batten down the hatches, so to speak. Any info on better grip technique for magnum small frame revolvers is appreciated.


r/Revolvers • • 6h ago

New Production Model 10

4 Upvotes

I'm looking at acquiring a new-production Model 10 (10-15) or a NIB 10-14... I've always wanted a *NEW* Model 10. I've owned multiple used ones over the years, but this time 'round, I want a new one.

I don't care about the internal lock, and I like the round butt and gravy barrel of the 10-14... any advantage to the new 10-15 ?


r/Revolvers • • 21h ago

best Budget revolver 200-400$ 3-5 inch 357 Charter arms, Taurus, Rossi,

Thumbnail
gallery
43 Upvotes

Getting a 357 400$ max budget I’m really eyeing up the charter arms professional I like the wood grips and the night sights are nice but Taurus has gotten some “they have gotten better” mentions in posts.


r/Revolvers • • 1d ago

Picked up this model 10-2 today for a steal!

Post image
76 Upvotes

Bought from original buyer with all paperwork and box. I think 550 was a steal for this. Never shot. Made December 1976.


r/Revolvers • • 1d ago

Old school

Post image
68 Upvotes

My first duty revolver a model 66 then went to the 686 always backed up by my model 60 no dash.


r/Revolvers • • 22h ago

Advice, Expertise!

Thumbnail
gallery
32 Upvotes

629-2 classic hunter non-fluted cylinder, 6” magnaport or 629-3 classic 6.5”.

Hoping somone with more expertise and experience could advise me on the better purchase here: 629-2 magnaported and unfluted cylinder classic hunter vs a 629-3 classic. A friend of mine is selling off a few of his collection and I’m hoping to purchase my first 44 mag. Correct me if I’m wrong but I understand a bit of the rarity aspect with the 6” 629-2 but the 629-3 I assume would have the endurance package for heavier 44 mag loads. All comments welcome!!


r/Revolvers • • 22h ago

A little Antique Tuesday shooting (Webley MK1)

27 Upvotes

It’s been awhile since I posted my circa 1890s Webley mk1 revolver in action. Aside from the occasional jank common in a 136 year old revolver, still runs smooth in single and double action.

Using low pressure smokeless 45ACP handloads: 3.5gn win 231, 190gn LSWC (pure lead cast), CCI large pistol primer, mixed range 45ACP brass, 1.25-1.26OAL

Cheers from Canada 🇨🇦


r/Revolvers • • 1d ago

Identifying a revolver

Thumbnail
gallery
38 Upvotes

Hey folks. I have a friend who is selling his revolver and he sent me these pictures. I’ve never owned a revolver before and have little knowledge about them. But I have shot it before and I like it. I know it’s a 357 mag and he has mentioned having some trigger work done.

He sent me the following pictures. Could anyone please identity what model this is and how much it would be worth used? It looks like a model 27-2 to me but I really am not sure. Thanks!


r/Revolvers • • 1d ago

S&W 27-2

Thumbnail
gallery
476 Upvotes

Carved Mammoth ivories on this one


r/Revolvers • • 23h ago

Hello. 22lr double action question

8 Upvotes

Hi. What is an affordable, reliable 22lr double action option?


r/Revolvers • • 1d ago

Ammo recommendations

8 Upvotes

Just ordered my first wheel gun, S&W 642 UC. New to the world of 38 special so looking for recs on good target ammo and carry ammo considering price and availability.

For my 9mm I typically just use Federal target or Blazer FMJ at the range and Hornady critical defense for carry. Is it as simple as grabbing the same stuff in 38 special or should I look into more specific manufacturers? Anything to definitely avoid?


r/Revolvers • • 1d ago

66 in the woods

Post image
165 Upvotes

r/Revolvers • • 1d ago

Hunting with the Model 500 | The World's Most Powerful Handgun

Thumbnail
youtu.be
6 Upvotes