r/SolidWorks • • 1d ago

CAD Variable revolves

Post image

Could someone help me out please? I want to do a revolve with the highlighted cross section that follows the contouring Gray. I've done it a thousand times but it was years ago and I cannot remember how to do it. If you have some insight I'd appreciate it

4 Upvotes

17 comments sorted by

4

u/Exciting-Dirt-1715 1d ago

That’s can be done with a swept cut, not a revolved cut

2

u/JacksWasted_Life 1d ago

Yeah you're right thank you

1

u/Auday_ CSWP 1d ago

Why not using extrude cut

1

u/JacksWasted_Life 20h ago

This is what I was going for. It's swept circular but the end of the cross section follows the ellipse.

1

u/Auday_ CSWP 15h ago

There is another way by revolve cut. a (cigar shape) above the surface and it will generate similar effect.

2

u/Vegetable_Flounder12 22h ago

wants a swept cut for arced removal .

sweep will work as if you use short side, but then there is still a hole.....

filled surface works best with split removal after.

1

u/Lumpy_Impress6107 17h ago

Actually a revolved cut will accomplish it.

1

u/Lumpy_Impress6107 17h ago

1

u/JacksWasted_Life 1h ago

This is definitely an interesting method that I've never considered in the past but it would be much more difficult to achieve the exact profile that I wanted to have by doing this sort of revolve

3

u/Vegetable_Flounder12 16h ago

doesn't necessarily match with the contour profile. the top profile looks more like blended arcs than an ellipse.

1

u/Vegetable_Flounder12 14h ago

looks like OP wanted elliptical profile.

revolved or swept arcs will achieve the same result, ignore the profile.

1

u/Lumpy_Impress6107 9h ago

Yea,, I noticed that also but I'm not sure if he doesn't want an elliptical shape there. The photo of the part looks elliptical. Perhaps for the blended arcs look a reverse dome?

1

u/thankHUWverymuch 1d ago edited 1d ago

Lofted Cut is what you need! With another profile at the 90 degree plane to your highlighted sketch.

3

u/Vegetable_Flounder12 22h ago

loft cut converges @ center. don't do it!

1

u/thankHUWverymuch 21h ago

Agreed, but surely this would be fine in this situation as there's a hole in his part? 

2

u/Vegetable_Flounder12 16h ago

posted @ 12:30 (after midnight) whilst seeing double :). should be fine.