r/SpringfieldArmory • • 13h ago

A cpl of my favs. Fun fact, my kuna weighs more than my Honey Badger

Thumbnail
gallery
17 Upvotes

r/SpringfieldArmory • • 15h ago

Echelon Dead Trigger Every ~30 Rounds (After Warranty Repair)

3 Upvotes

Looking for insight on a recurring dead trigger with my CA-compliant Springfield Echelon (with the magazine disconnect safety):

Every now and then and for no reason, I get a completely dead trigger while shooting and it keeps happening. For example I shot 2000 rounds through it with no issue and then recently started again

When I drop the mag and rack the slide, a live round ejects! so it’s feeding and going into battery fine.

Reinserting the same mag and rechambering the exact same rounds fires normally until it happens again ~30 rounds later.

Context:
Out of the box, it wouldn't fire a single round. I sent it to Springfield for warranty work (they didn't specify what they fixed), and now it shoots, just with this recurring dead trigger.

The magazines run flawlessly in
my Echelon 4.0C, so it isn't a mag issue.

I suspect the CA magazine disconnect safety in the COG is losing contact or tripping under recoil.
Anyone else run into this on a CA-compliant Echelon or know a permanent fix before I send it back to SA again?


r/SpringfieldArmory • • 16h ago

I love the modularity

Thumbnail
gallery
93 Upvotes

r/SpringfieldArmory • • 19h ago

Sharp Bros & Mischief Machine Grip Panels

Post image
15 Upvotes

r/SpringfieldArmory • • 1d ago

Streamlight TLR-7x sub/ hellcat pro

Thumbnail reddit.com
1 Upvotes

r/SpringfieldArmory • • 1d ago

She is ready

Post image
24 Upvotes

r/SpringfieldArmory • • 1d ago

Added a .300 to my little Springfield family

Post image
58 Upvotes

r/SpringfieldArmory • • 1d ago

Bad detent spring or user error?

Post image
5 Upvotes

Slide locked forward at the range and I could no longer manipulate the safety lever. Dropped the mag, forced the slide back & ejected the round. Chambered and fired a round to make sure everything was fine and the safety lever popped off completely. Bad detent spring or user error? Not sure it makes any difference but my left handed friend was shooting it at the time.


r/SpringfieldArmory • • 1d ago

My EDC Hellcat Pro Setup

Post image
54 Upvotes

My edc hellcat pro setup. Still haven’t changed the Viridian dot, mainly because im indecisive about using a plate or filing down the rear posts. Let me know what yall think. I’m open to any suggestions!

Apex trigger Tlr-7x Sub True Precision threaded barrel Rook Precision comp


r/SpringfieldArmory • • 1d ago

What the…..

Thumbnail
gallery
3 Upvotes

Got e mail the Echelon 4.0FC Pro back in stock as of 9:00am. 9:06am no button to add to cart BUT the get notified button is available. Damn is this really selling out like that.


r/SpringfieldArmory • • 1d ago

Slide hitch

Thumbnail reddit.com
1 Upvotes

r/SpringfieldArmory • • 2d ago

Doing too much 😅

Post image
67 Upvotes

I'll probably never get tired of the XD line and messing around with them. Laser stippling this one soon and some slide windows/porting and I think I'll be done.


r/SpringfieldArmory • • 2d ago

Why is the Echelon Pro better?

4 Upvotes

I’ll start by saying that I am aware that this is a Springfield sub and the responses are likely biased, that’s ok.

I’m looking to add another EDC to the lineup and I’ve narrowed it down to the M&P metal carry comp and the Echelon Pro 4.0fc. Why should I choose the Echelon? For reference, I currently carry a gen 4 Glock 19 with a light & dot. I own an M&P 2.0 10mm PC, love it. I also own an older full size XDm 9mm that’s been great. I’ve held the carry comp and the standard echelon, but not the pro. Both felt great in the hand. I plan to try and rent/shoot both, but figured I’d come here too on this lazy Sunday.


r/SpringfieldArmory • • 2d ago

I fell victim to Florida's no sales tax holiday. It's the 10th time this year. I might as well go spend the rest of my paycheck and slap an SRO on this bad boy.

Thumbnail
gallery
56 Upvotes

Echelon Pro Comp 4.5F


r/SpringfieldArmory • • 3d ago

Almost done with her

Thumbnail
gallery
124 Upvotes

I didn't realize how much better the larger frame for the Echelon fits my hand until I got to hold one side by side with my current setup. Now all I need to do is get a new frame, get the correct size magwell and backstrap as well as a black steel gas pedal.

Definitely one of my favorite guns to shoot.


r/SpringfieldArmory • • 3d ago

Inforce

Post image
30 Upvotes

Not bad 🤙


r/SpringfieldArmory • • 3d ago

Springfield Echelon Optic question

2 Upvotes

Which pin set to direct attach the Holosun EPS?


r/SpringfieldArmory • • 3d ago

What red dot would yall recommend with the a2 front post?

Post image
5 Upvotes

r/SpringfieldArmory • • 3d ago

She's Comin along

Thumbnail gallery
12 Upvotes

r/SpringfieldArmory • • 3d ago

Am I tactical now?

Post image
111 Upvotes

r/SpringfieldArmory • • 3d ago

Finally fixed my XDM Elite Precision (5.25"), now it is a fantastic range gun

Thumbnail
gallery
10 Upvotes

As I mentioned in previous post, I encountered the notorious issue for XDM, supporting hand accidental hitting the slide release caused pre-mature slide lock back ( Need a solution to XDM elite precision (5.25"), premature slide lock back, modification options : r/SpringfieldArmory )

I used torch and plier/wrench/table vase, just bent the left hand side slide release upside down. I actually put a piece of rubber hose around the release to make it feel better (not shown in the photo). Now problem solved! 100% reliable, never expect this old gun becomes a fantastic range/home defense gun again. super accurate, very flat (I ported it). Just too big for carry.


r/SpringfieldArmory • • 3d ago

Kydex holster.

Thumbnail
gallery
13 Upvotes

Figured id share with the group. I made my first holster on my xd mod3. The first one I messed up, the second one I did pretty good( i got carried away on the retention hole) , it sits concealed well, clicks in nicely, can't complain. I added a light and the only holster I could find was $180, with clamps, wood, kydex kit and the pvc pipe, I came in under $100.


r/SpringfieldArmory • • 3d ago

Echelon mix and match compatibility?

1 Upvotes

Hi all,

New to modular platforms like the Echelon. I’ve said that Springfield should just sell the COG by itself for like the past year and now that they read my mind and took my advice I’m super interested in picking up a COG and building it from the ground up.

That being said, I did have a total noob question - is it really as simple as sourcing a COG, buying a grip, barrel, and slide and then slapping it all together? Any quirks or small bits to make sure not to forget? Do grips normally come with mag releases? Are pretty much all grip modules going to be compatible with pretty much all barrels and slides?

Thanks in advance gang,


r/SpringfieldArmory • • 3d ago

Lookin for a decent holster for my mod 4

Post image
29 Upvotes

Purchased a few months ago just need some solid recommendations tbh. I don’t wear jeans so I’ll need something that can go with a fabric clip. Or just tell me what y’all think I need to get


r/SpringfieldArmory • • 4d ago

BEST AIWB HELLCAT HOLSTER?

2 Upvotes

I’m sure this has been asked 100 times but I couldn’t find anything recent in the search bar, so please drop your recommendations for best holster for EDC. I am in and out of cars all day and drive a lot. Hellcat is stock and staying that way. Thanks!!