r/Staccato_STI • u/Mitiki22 • 3h ago
Staccato Jack Carr is this our P4.5X?
P4.5X?
r/Staccato_STI • u/Charming_Island_9373 • 14h ago
I work in Law Enforcement and I have carried a Glock my whole career (Glock 17 and Glock 19). I have been recently wanting to make the switch over to a Staccato but I can't decide on the P4X or the XC. I understand that the HD models were technically geared more towards Duty Use but everything online says the XC is better all around. Is there any LEOs out there that have carried either one of these and if so how has it been?
r/Staccato_STI • u/MakingPeachesHappy • 1d ago
Designed a mag release and does the trick. No longer will I have to adjust my grip for reloads!
Working on updates for this version and maybe a few others.
r/Staccato_STI • u/Empty_Row6906 • 2d ago
New to the 2011 scene and recently got this XC and RCR for an absolute steal during a demo day at my local FFL. Got the staccato care as well for it when I purchased it but was wondering how that works if I decide to swap the grip out with an aluminum one. If something needs to be replaced or updated will they still do such or would I need to put the factory grip back on?
r/Staccato_STI • u/goldenboy9595 • 1d ago
Anyone mounted one of these on their c4x? Just curious how it looks and fits. I like the idea of having the smaller EPS Carry footprint with the larger EPS window. Would love to see some pictures if anyone has this setup. Thanks!
r/Staccato_STI • u/ToeBeginning9830 • 2d ago
Just installed my DPM guide rod with the long black spring and I noticed it’s sticking out a tiny bit. Anyone else have that issue or did I not install it back correctly? Getting these rods in is a pain in the a$$.
r/Staccato_STI • u/dudworks • 4d ago
Update to my last post
Bought a used Defender for $160 instead of a DPP. Glad I got it because the side buttons are nice and the dot looks fine to me
Jarvis drop in barrel took about 3 months to get here. Haven’t shot it yet so we’ll see if the wait was worth it.
PMM comp looks great but the air gap (2nd pic) is excessive so I might send it somewhere to get it timed properly. It seems like this is pretty common with PMM comps
r/Staccato_STI • u/g0jii • 4d ago
Here is my collection, two of the three are LAPD Edition.
r/Staccato_STI • u/AdditionalWin7982 • 5d ago
Finally finished this build and all I can say is wow! The frame from drive arms co is awesome and the porting from slide works engineering makes this thing my absolute favorite pistol I own.
r/Staccato_STI • u/12yuval12 • 4d ago
Thinking about ordering a TXC Delta or CVRT for my Bul Armory Ultralight 3.25 (fluted barrel). TXC only makes them for the Staccato CS 2024, and the two guns are supposed to be close in size.
Has anyone actually tried this combo? Does it click in and hold with the retention, any looseness around the dust cover, and is the shorter barrel an issue? Pics welcome. Thanks!
r/Staccato_STI • u/Platypus_Stunning • 4d ago
Crowdsourcing our next Stacatto HD Cerakote project.
Which option do you guys like? Will be doing progressive ports on this one. Will probably use the driven arms grip as well.
r/Staccato_STI • u/CarBallRocketeer • 4d ago
Evening gents,
Is it worth waiting for Black Friday to try to purchase an HD P4 or P3.6? And are there any direct mount options for optics or just the HOST plates?
Never owned a double stack 1911 before and I’m interested in taking the plunge to escape from the Gen 6 Glock trigger.
Preciate y’all!
r/Staccato_STI • u/toasted_bread_5000 • 6d ago
Hi there. I am looking for an optic and plate combo that people have good experiences with. I currently use a Holosun 507 Comp with the Staccato HD HOST RMR Mounting Plate and my left optic screw has sheared off of the slide requiring me to send it in to warranty to remove. I have since bought stronger, higher quality 12mm screws (using vibra-tite vc3 + torqued to spec) but the left one keeps loosening after use.
Does anybody have any experience with an optic combo and plate with this specific gun, in which their screws don't loosen with use? I shoot the gun pretty fast so the stress may take its toll, but I really don't like having to re-tighten my screws in the middle of every range trip. Really I am just looking for some combo that can go through thousands of rounds without needing to worry.
Ideally an optic with a big window similar to a Holosun 507 Comp, but honestly I dont even care anymore. I'll take anything that doesn't back out with heavy use.
EDIT: Staccato customer service told me they have the exact screws for my optic and plate combo, I am going to use a nylon brush to scrub the threads, then try those out when I receive them. I guess if that still doesn't work out I will send it back in to warranty to check the threads. Maybe when the holosun screws snapped off inside of my slide, it messed them up. Will update the thread on my results.
r/Staccato_STI • u/sunstarechampion • 6d ago
r/Staccato_STI • u/InevitableSea69 • 6d ago
Staccato is releasing approximately 100 original Staccato P 4.14 CPO models soon.
r/Staccato_STI • u/Dry_Economist_2119 • 7d ago
I have a C2 that I am going to start carrying everyday and I have an extra TLR7X from my 43x but cannot get it to fit. Do I need a different key/plate or will I need to get a new light?
r/Staccato_STI • u/Philly3458 • 8d ago
Took this little HD C3.6 to the range again today and reminded me how amazing a pistol it is. Never a malfunction, accuracy off the charts and handles recoil superbly. Worth every penny if lives are on the line.
r/Staccato_STI • u/TourneyCollector • 8d ago
I'm considering letting this piece go, but I'm not sure what they're fetching nowadays.
Infinity trigger with an extended atlas shielded thumb safety.
Just need some input from the experts.
r/Staccato_STI • u/Schizo_Postin • 8d ago
Alright, first Staccato. I’ve read “oh the Staccato P is the extra most bestest suppressor host ever.”
And I wouldn’t know. Maybe I’m doing something wrong. Let me explain my setup and maybe you all will see something I’m not. The host is a staccato P I bought new back in August of this year. It’s approaching 1k rounds. Flawless function unsuppressed.
Suppressor 1: SiCo Spectre 9k. Yes I’m using a booster. Yes Its lubricated with white lithium. Will run 90% reliably with factory recoil spring shooting supersonic ammo. However I do get failures to feed or live rounds ejecting during cycling. I’m not sure if the increased back pressure is causing the slide to cycle too fast knocking the next round in the magazine out, or what. Usually happens towards the end of the magazine. Shooting subs just straight up doesn’t work with factory recoil spring. Failure to eject city. Sluggish slide. DPO 11 pound spring helps quite a bit, but still not all the way there. Subsonic load of choice is blue box federal HST 147 grain and federal Syntech 150 grain.
Suppressor 2: Mojave 9. Straight up will not work at all. Subs, supers. Nada. The gun won’t even begin to unlock unless I run the can in short config with supers. Then I get a short stroke and failure to eject. I even called dead air I was so perplexed, they recommended I use nickel based anti seize as booster lube. I did, same results.
I’m at a loss. I dunno if I should go up in spring weight, down in spring weight or what. Open to suggestions.