r/Trebuchet • • 22h ago

I'll have to bring the big guy out to fling this thing! How much can your machine fling?

Thumbnail
youtube.com
3 Upvotes

r/Trebuchet • • 23h ago

beginner help for trebuchet

2 Upvotes

i am trying to build a small trebuchet to go around 3-5 meters. the base is limited to a 50cm x 50cm dimension. can anyone give me some tips and advice to make this work??


r/Trebuchet • • 1d ago

Issue with hook/release

Post image
3 Upvotes

Noobie here. I am having mixed results with the sling releasing the pumpkins. Some have launched perfect and some have release very early. I just cobbled this hook together with what I had on hand. I used two tool hangers. But from what I have seen most of you are using a polished pin on a 45 away from the bottom of the throw arm. If anyone would be willing to DM me with a photo of their release i'd appreciate it!


r/Trebuchet • • 2d ago

Need Help

4 Upvotes

I made a whipper, but I think pretty much everything is off. Ratios, beam length, all of it. Pretty much just made this up as I went along with the idea of tweaking it as I need to when it was built.

But I can’t even test it. The “payload” won’t stay put long enough to launch it. How do you guys hold the payload/pouch in place?


r/Trebuchet • • 2d ago

Noobie looking for help

2 Upvotes

Just built my first trebuchet! So far the results are mixed. After testing about 10 pumpkins two went about 100 feet! The rest didn't release properly. Please excuse the lack of terminology. But can anyone show me detailed pictures of how they hook the releasing side of the sling to the throwing arm? I just want to compare what I have done to what others are doing. I'll post again tomorrow when I can get a day time photo of what I have.


r/Trebuchet • • 6d ago

What's the first rule of catapulting?

3 Upvotes

r/Trebuchet • • 9d ago

The Battery at my last exhibition, and some number crunching on the winning tournament shot at Lewisville Punkin Chunk. Turns out it was a +/-670 m shot. My PB, the machine's PB, and a State record. 300 Arms at 225:1 mass ratio. +/- 115.3 m/s, running at +/-93% efficiency...Sick

Thumbnail
gallery
24 Upvotes

r/Trebuchet • • 13d ago

You can feel the power.

Thumbnail
youtube.com
16 Upvotes

r/Trebuchet • • 14d ago

My trebuchet in action

Post image
1 Upvotes

r/Trebuchet • • 16d ago

More video from tournament

Thumbnail
youtube.com
3 Upvotes

r/Trebuchet • • 17d ago

A litte trebuchet

35 Upvotes

r/Trebuchet • • 17d ago

We won again.

Thumbnail
youtube.com
9 Upvotes

r/Trebuchet • • 25d ago

Simple modern and historic release mechanisms.

15 Upvotes

r/Trebuchet • • 25d ago

Whipper to HCW re-configuration 3rd shot #trebuchet #woodworking #punkinchunkin

Thumbnail
youtube.com
2 Upvotes

r/Trebuchet • • 25d ago

help with release mechanism

4 Upvotes

does anyone have any ideas on how to make a good firing mechanism if my counter weight is 200 pounds


r/Trebuchet • • Oct 19 '26

Thanks yall!

57 Upvotes

Thanks for all the input, I’ve got it firing nicely! Getting ready to start increasing weight and optimizing release! My goal is for it to be an impressive spectacle, not particularly an optimal build, so I’m stoked with where it’s at for today.


r/Trebuchet • • Oct 18 '26

Anybody have any plans that they would be willing to share with me or any ideas for building my own trebuchet please I've been wanting to build one for years but I don't know how

9 Upvotes

r/Trebuchet • • Oct 17 '26

Forged Trigger

Post image
17 Upvotes

A friend of mine built a trebuchet and asked me to make him a trigger for it. I had an extremely hard time finding any examples of trebuchet triggers online. I found a drawing, but then designed this one myself loosely based on the drawing. I just wanted to share this in case it helps anybody else in the future. He hasn’t installed it yet, so it hasn’t been tested, but I can’t think of any reason why it shouldn’t work. I can provide updates once he tells me he’s installed it, but I’m not sure when that will be.

I just wanted to share this in case it helps anybody else in the future.


r/Trebuchet • • Oct 12 '26

How do small groups insure a pumpkin-launching trebuchet for public events?

5 Upvotes

Hi all! A friend and I run a small volunteer kids’ physics program in western Massachusetts. Kids build desktop trebuchets at library workshops, and we’re planning a 10-ft+ wooden counterweight trebuchet to launch pumpkins at a few free community events in fall 2027 (roughly 100–300 spectators each).

Insurance is our biggest question. Online event insurers (K&K, Sadler, etc.) exclude “pumpkin chucking.” One agency told us carriers that will write it usually have minimum premiums of $3,500–$5,000+, but we’ve also heard of a similar event paying around $350 for a one-day $1M/$2M policy through a specialty carrier. We’re working with a broker now.

If you’ve run or launched at a pumpkin chunkin’, trebuchet or catapult event:

  • Who carried the liability coverage: you, the host, a club, or a festival policy?
  • Roughly what did it cost, and was it one-day or annual?
  • What did the insurer require (spectator distance, inspections, age limits)?

Any leads appreciated, especially in New England. Thanks!


r/Trebuchet • • Oct 11 '26

595meter Intercontinental ballistic pumkin.

34 Upvotes

Our best shot during the Belgian pumpkin chunkin competition.


r/Trebuchet • • Oct 09 '26

Trebuchet Design Help!!!!!!!

1 Upvotes

Hello, I am a student who is taking part in a local pumpkin chunkin cometition. I am here to seek some help and guidance to make a first Trebuchet launcher for this competition. The design dimension requirements are (60cm x 45cm x 45cm). Help is greatly appreciated if available.


r/Trebuchet • • Oct 02 '26

Cool winch

Thumbnail
youtube.com
3 Upvotes

r/Trebuchet • • Sep 28 '26

Help!

32 Upvotes

Looking to get more distance. How do I do that? More counter weight or is my release pin angle wrong or is it something else. Give me ideas to try please


r/Trebuchet • • Sep 26 '26

Trebuchet Repair Help

Post image
6 Upvotes

Hey y'all, I'm trying to repair an old trebuchet for a student org.

Everyone who built and maintained the trebuchet graduated years ago without writing anything down, so I wanted to ask for some advice here.

The height of the trebuchet is between 5-6 ft and the length of arm is around 6 ft from the pivot point. From what I heard, the trebuchet was abandoned because it was firing backwards and falling apart in general.

The biggest thing I need to repair are the pouch and the release mechanism.

The previous pouch was made of duct tape, but it's been completely torn to shreds so any help on preferred designs or tips for making a new one would be appreciated.

The release mechanism is really stumping me. I've attached a picture, but I can't figure out what the point of the second nail is. I've tried looking into it and every design I see only has a single hook. Any advice on if I should pull one of the nails out and how I can adjust the curve of the remaining nail would be great.

If there's any measurements I should take then let me know and I can try adding them as a reply or something. I'd appreciate any help y'all can provide.


r/Trebuchet • • Sep 05 '26

Need names for it fellas

Post image
9 Upvotes