r/VIDEOENGINEERING • • May 03 '26

The 71,000 subscriber update

160 Upvotes

Hey folks,

Just posting to give a brief rules update. Nothing should change for most folks, but there are a few changes/clarifications to highlight.

  1. The no advertising rule has been changed to include market research and "try my app" type posts.
  2. There is a new rule about staying on topic, this is mostly to get rid of the small number of "enhance my video" type posts.
  3. The new rule about being accurate in your communications is mostly to discourage regurgitation of incorrect information and hearsay. Nobody is going to hit you upside the head with a copy of ST 2110-20, but there is also only so many times you can say "Blackmagic bad" or "you need a boundary clock for Dante PTPv1". If you're trying to help somebody and you aren't 100% positive about what you're saying, then just qualify it as such.
  4. AI generated content is now banned, except for translation purposes.

As always, if you have content you would like to share and it would ordinarily break one of the sub's rules, don't hesitate to reach out for an exception.

And don't forget to join the Discord either. https://discord.gg/ctKKpK8


r/VIDEOENGINEERING • • 3h ago

How to Avoid Spaghetti Westerns, Noodle City, and Converter Controversy - Requesting F/BOH Setup Advice

4 Upvotes

Maybe its my ADHD. Maybe I was born with it. And maybe it ISN'T Maybelline.

Ive been an operator for a few years, but this past year I have been more of a tech where I am more involved in setup. I am capable of making sure all my ins and outs go to the right place. Converting from sdi to HDMI to fiber, NDI - etc. If we have everything planned perfectly, I can pre build a rack with extra DACs, or slide them on top of each other and gaff it to the table. But for some reason, clients keep on adding extra things on every show. "we need another monitor over here. We need an extra out over there. One guy cant come so can we set up a zoom station.

We often say yes because - hooray more rentals, more money. But when that all happens during the load in, my plans for layout turn into Rats nests and Magewells braided with DAs.

Is there any advice/tips/tricks to help keep your FOH a little more organized so you dont have to rely on a tech surround to cover the ugly mess of wires?

I feel like my superiors are also on this subreddit so if y'all are reading this - know that this post is strictly for professional development!


r/VIDEOENGINEERING • • 13h ago

Where does each protocol actually fit? WebRTC vs RTMP vs HLS vs SRT vs RTSP, with real latency numbers

13 Upvotes

Disclosure: I work at Ant Media. We put together a side-by-side comparison of the main streaming protocols, and I thought it might be useful here.

Typical latency ranges from the guide:

- WebRTC: 0.2-0.5 s

- SRT: sub-second (depends on the network)

- RTSP: 1-3 s

- LL-HLS: 2-5 s

- RTMP: 3-6 s

- HLS: 8-30 s

The pattern it describes is the one many of us already run: RTMP, SRT or RTSP for contribution and camera capture, then a media server converting to WebRTC for interactive viewing and HLS/CMAF for large audiences.

Full write-up: https://antmedia.io/what-is-webrtc-and-how-webrtc-works/

I'd love to hear how you handle the contribution-to-delivery hop in your own pipelines. Any setups where this breaks down?


r/VIDEOENGINEERING • • 1h ago

RP120 with HE145?

0 Upvotes

Panasonic website says No, but manual has a few references to it that confuses me a ton. Did call them but I think they’re reading from the same web page I am. Anyone know for certain?


r/VIDEOENGINEERING • • 1h ago

Should I invest $2,200 in Meta Ads to grow my video production business? Looking for honest advice.

Thumbnail reddit.com
0 Upvotes

r/VIDEOENGINEERING • • 10h ago

Live Captions/Summaries

2 Upvotes

Hi all,

I’ve got quite a loaded question, wondering if someone can help?

I have a job next month where the client would like live captions onto a relay tv (easy, I’ve got options), however, they would also like a session summary in text after each session, as well as a transcript, that we would then upload to the event management app. Just wondering if anyone’s found an all in one solution? The closest match I could find is Wordly, however with multiple breakout rooms over 3 days, it seems really pricey. Not too concerned about pricing at the moment just need to gather some options

Cheers everybody!


r/VIDEOENGINEERING • • 21h ago

AJA FS1 - No output HD-SDI

3 Upvotes

At my workplace, we have around 10 AJA FS1 units, and every single one has developed exactly the same issue over the years: they eventually stop providing HD-SDI output.

Has anyone experienced this problem before? Does anyone know which component or crystal might need replacing to fix it?

Any help or advice would be greatly appreciated!


r/VIDEOENGINEERING • • 17h ago

Replace Yolobox

Thumbnail reddit.com
0 Upvotes

r/VIDEOENGINEERING • • 21h ago

Silly BM Question

1 Upvotes

Does anyone have a wiring diagram of the Black Magic Studio Fiber converter and or know what triggers the transformer for SMPTE power to kick on? Looking at a repair on one of our units and looking for some guidance/ information.


r/VIDEOENGINEERING • • 23h ago

Box Lens Vibration Dampening

1 Upvotes

Where I work, we broadcast live football at a local field where the spectator stands are all very springy metal, and when an exciting play happens and everyone is on their feet and stomping, the tight follow is struggling to stay still. All of that vibration goes straight up the stands and into the tripod.

My current idea is to get two pieces of plywood and sandwich some kind of vibration dampening rubber in between, and have the camera sitting on top. But I am not sure how well that would work, nor what materials I should actually be using.

Just need a sanity check and/or better ideas, thanks!


r/VIDEOENGINEERING • • 1d ago

Recs for ear pieces and wireless lavs

0 Upvotes

Hello,

Editing to be more specific: for those asking, the lav was requested by the talent. I would prefer wired and might push for that. They seem to want a lav set that will be both functional into the Yamaha and later used for out of studio shoots. Is that something I should advise against and just push for either wired or an on rack set? I can't think of an easy or logical way to get a mobile rack that easily connects to the in studio mixer. Is there a suggested set up for mobile lavs being used regularly in a studio setting into a mixer? Any advice would be appreciated.


r/VIDEOENGINEERING • • 1d ago

Help with a very odd E2 problem

1 Upvotes

We're using E2 software (laptop + streamdeck) to run a PDS4K. 4 HDMI inputs. Various outputs to video wall and streaming computer.

When we plug any Windows computer into any of the HDMI lines, it wont fill the destination screens. The image is too small. We are outputting 1920x1080 from the PDS. Changing the output resolution on the PC laptops does nothing. They are set at 1920 x 1080

I plugged a macbook pro into the HDMI lines using the same dongles and there are no problems at all. The mac populates the whole destination screen, no issues. Mac is also set to output 1920 x 1080. Any ideas?


r/VIDEOENGINEERING • • 2d ago

Adding a second camera. Is this where NDI starts being worth it?

5 Upvotes

Hello everyone! So Im thinking about getting a second camera. My current setup is a Sony ZV-E10 through an HDMI capture device into OBS, with audio coming through an interface. Everything sits fairly close together, so the cabling has been straightforward.

I’m now looking at the new Tail Air 2 for a second angle on a demonstration bench across the room. Tracking is part of the appeal, but placing the camera where I actually want it has also got me looking at the NDI edition.

The standard version can’t have NDI added later, which makes this a slightly more permanent decision than my usual “buy it and work out the cables afterwards.”

I’m pricing another HDMI capture path against the NDI version, Ethernet adapter and network setup. I’d keep the Sony connected as it is, so I’d also need to check sync between the two feeds and the audio.

For anyone who made that jump with a small OBS setup, what made NDI worth the extra setup? Camera placement, expansion, or? Thank yall for any advice.


r/VIDEOENGINEERING • • 1d ago

Older analogway matrix switch help

1 Upvotes

Hiya, so..

I've just acquired an older SMX200 matrix switch for cheap, wanting to use it for just 'normal' analog video switching from my xbox360/Dreamcast etc to one output over VGA. No scaling etc would be involved, but I'm hitting a dead end with trying to get it to do anything useful (apart from generate test patterns on the outputs and not a lot else)

I'd assume there's software or similar to get this to do something useful? Just again, hitting the dead end as to where to go, or what to do next to make it work.

I've tried RCS2 but that is somewhat broken and doesn't show any inputs, and I haven't the foggiest of ideas how to get it to display one input as the output.

Basically, I'd want it to be 6 inputs (of varying formats) and then being outputted to VGA (RGBHV) for my scaler and S-Video for my lil PVM CRT.

Unsure if I've bought a dud here, or I'm completely out of my depth, but.. my argument is, don't ask, don't get!


r/VIDEOENGINEERING • • 1d ago

Safely sending commands and receiving feedback from Barco E2s?

2 Upvotes

For a custom control app, what's the safest way to interact with E2s?

The RPC JSON stuff and Companion modules are great, but don't allow me to do what I want. There was a custom XML module on Companion but it's been deprecated for some reason.

I seem to recall that it's possible to cause issues, maybe interrupting normal show operation, by improperly interacting with E2s via network.

Any advice?


r/VIDEOENGINEERING • • 3d ago

Why are BBC journalists holding lav mics???

Post image
118 Upvotes

r/VIDEOENGINEERING • • 2d ago

Sony RCP-1500 to Trigger AJA Kumo Matrix

2 Upvotes

Hi everyone,

in my company we´re using Sony Camera Chains and RCP-1500s. I´m looking for a way to use the RCP´s preview trigger to change the output of a matrix to the respective camera signal to send it to the shading monitor. We´re using AJA Kumo 1616 and 3232 Matrixes.

Is there a way to set this up using only direct ethernet connections? Or is there no way around another device inbetween RCP and matrix that recives the preview trigger from the rcp and then translates it to the matrix via ethernet? This is the only solution I found so far.

I know I can set it up with a Streamdeck and Companion, but I´d prefer a way to do it directly via the RCP without needing a laptop plus streamdeck.

Alternatively, is it possible to use that trigger signal to control a Ross Carbonite Ultra? So I can press the preview button to e.g. switch a MiniME to the wanted camera signal as a workaround?

Any Input is much appreciated, thanks!


r/VIDEOENGINEERING • • 2d ago

DVCPRO50 PAL Needed

1 Upvotes

Anyone has any leads for DVCPRO 50 PAL version. 1-2 decks needed…
Preferably 1/2 rack full rack will also work


r/VIDEOENGINEERING • • 2d ago

Should we have a monthly self promotion thread?

15 Upvotes

Should we have a place so all the vibe-coded "try my apps" can post.

Ideas start small. Maybe I code a Powerpoint to ProPresenter converter, where could I hawk that. (I didn't but I would love one). It'll be awhile before it becomes a full fledge company.

We definitely don't need a press release section. That will get innudanted quickly with PR and AI slop.

What are your thoughts? Maybe it all comes down to what menick, evil, tom and V1steak want.


r/VIDEOENGINEERING • • 2d ago

Experience with Canbest LED?

0 Upvotes

Buying LED for the first time. Looking for about 25-30sqm. Been talking to Canbest who seems to have very reasonable panels with good specs. Anyone here have real life experiences? Or maybe some other tips to share for a first-time buyer?


r/VIDEOENGINEERING • • 4d ago

Backstage Barco Blackjack anyone?

Post image
106 Upvotes

Happened across these on eBay from an Italian seller about a month ago and they finally arrived today!

The deck was manufactured in Belgium where Barco is headquartered. Apparently having a 1 card instead of an Ace is what’s called a French deck. The more you know!


r/VIDEOENGINEERING • • 3d ago

Xpression urgent help

3 Upvotes

Hello, sorry for short notice. About to run a production and due to faulty SSDs had to wipe the gfx production machine. I'm looking for Xpression 12.5 installer quickly as going through Ross support would effectively take us out of production time.

Many thanks for the assistance!


r/VIDEOENGINEERING • • 4d ago

Blackmagic Broadcast cameras are both ”Gold“ and ”Trash“ in my country. Body

49 Upvotes

It’s Gold because some music event organizers love the cheap price and "cinema look" for concerts.
It’s Trash because for Sports, TV Studios, Government events, and High-End stadium concerts, nobody touches them. Real OB trucks here still rely on Sony HDC/HXC and Panasonic UC4000.
Don't get me wrong—their infrastructure and post gear like ATEM Constellation, HyperDeck, and DaVinci Resolve are genuinely great. It's just the broadcast cameras that struggle in heavy live environments.
Is it the same in your country?


r/VIDEOENGINEERING • • 4d ago

My experience with Telestream Wirecast support after upgrading to M5 Max: beware before migrating

5 Upvotes

I have been a paying, satisfied user of Wirecast (version 15) for years on my Apple Silicon M1 Max workstation. I never needed to contact customer support until recently, when I upgraded my setup to a new M5 Max Mac running macOS Tahoe.

Before installing the software on a brand-new production machine, I reached out to Telestream with two straightforward, preventive technical questions:

  1. Should I expect compatibility issues or system instability running Wirecast 15 across a massive four-generation Apple Silicon leap (from M1 Max to M5 Max) and the latest macOS?
  2. Only if compatibility issues exist, what are the reasonable upgrade options for a long-time registered customer?

First, my inquiry was completely ignored for days. When I finally managed to get a human reply after a formal follow-up, the response was deeply disappointing and commercially unfair.

Support bluntly stated that they "no longer test" version 15 and immediately pushed me toward paying $249 to reactivate an Insider Access Plan (which, notably, comes with auto-renewal pre-checked in the cart) or switching to an expensive recurring subscription.

In short, Telestream puts paying perpetual-license owners in an unacceptable bind: either you install legacy software on your new workstation as a guinea pig at your own risk, or you pay hundreds of dollars just to get a clear technical answer and guaranteed compatibility.

This lack of basic accountability toward existing customers is a massive letdown. For this reason, I am migrating my live production workflows to open-source alternatives like OBS Studio, which are natively updated, transparent, and free from these commercial traps.

Has anyone else here actually tried running Wirecast 15 on M5 Silicon / Tahoe, or dealt with similar support policies from Telestream recently?