I work in Ableton Live as a primary DAW instead of Logic or Pro Tools because I've become so quick in it and love the easy, fast routing, etc. Even comping vocals is very efficient. But the one thing I really lacked was a Beat Detective style quantization for live drum kits. I didn't mind the time stretching vs. chopping, because it typically sounds fine for my purposes, but the problem is that even when linking tracks, there was no way it wouldn't quantize every drum channel separately, which resulted in horrible phase issues. So my alternative was just doing everything by hand one measure at a time, scooting things to line them up to the grid. However, I FINALLY figured out a suitable way to do it. It's still not super easy or straightforward, but saves a ton of time compared to manually scooting every beat when needed :)
Steps:
1) Right click all the drum channels and click Link Tracks. Then you can record arm and record your drum takes. Do your comping to get to a final take. But don't worry a ton about timing. Of course, go ahead and manually scoot a few sections to get them generally close if there are any very loose sections or fills you don't want to get destroyed by the quantize. Once they are comp'd, right click any of the tracks and click "Consolidate" to combine them into single clips per channel.
2) Make a group of just the drums you want to use for the program to hear the transients. I have seen people do just kick and snare, but toms are probably good too. I happened to already have a group of just the drums (not overheads) that I called "tubs." I suppose even having the overheads in wouldn't hurt though... but haven't tried it that way yet... so may be able to even use your regular drum bus.
3) Make a new audio track (I named mine "drum timing track) and set the input of that track to whatever group you made (for me, "tubs" which is all the drum shells that are mic'd. I also set mine to pre-fx, because I had some compression on the tubs channel that may have blurred the transients.
4) Record arm the new track and record the whole song to bounce just the drum group you made to a new single clip which will be a mixdown of all the drums with transient info you wanted included.
5) After you stop it, right click the new clip and select "Extract Grooves." This takes a pretty long time on my MacBook Pro with M4 Pro.
6) The groove will now show in what's called the "Groove Pool" which is your list of grooves in the left (for me it was already under the browser area). Now change the quantize value to 100% if it's not already, and customize the beats you want. Mine is set to 16th notes.
7) Now go ahead and MUTE the new track you made which has the mixdown of drums. You don't want to forget and have that play, doubling the real drums :).
8) Make sure your drum channels you want to quantize are all linked as in step 1. If they are, then double click to select one/all (I clicked the kick drum). Now it highlights all the drum channels/clips. You'll see they are selected in the bottom left corner where it will say "7 Clips" for instance, depending on how many you have. Of course make sure it already has Warp lit up, and mine is on Complex mode, but you may want to choose Beats mode. (Just listen for any odd sounds in the overheads particularly when you can).
9) In the Clips view in the bottom left, under the Loop, position, length, etc... you will see a "Groove" section and it has a drop down that should be on "None." Change that from "None" to the name of the groove you extracted from your drum mixdown. Mine is called "drum timing track." Then click the little RIGHT ARROW icon above the name of the groove, while all your drum clips are selected. This will apply the QUANTIZE processing of 16th notes and 100% (or whatever you set) to the GROOVE, which will then apply to the tracks, but it somehow applies to the GROUP and not the invidual channels, so things are kept in phase.
It's not perfect, there may be some spots where you want to fix... but you can go in previous take lanes if you want to grab the original takes, or whatever. It has saved me a lot of time on two songs so far!
Let me know your thoughts and if this works for you, or there's an even better way/quicker steps on some of it. Thanks!