r/admincraft • • 19h ago

News JVM CVE: JAVA SERVERS AFFECTED

183 Upvotes

CVE-2026-114938

There is a bug in how the JVM decodes Base64-encoded information on servers capable of using the AVX-512 instruction set.

To mitigate, add `-XX:-UseBASE64Intrinsics` to your startup flags and restart all of your servers.

Once all versions of Java have been patched, this will no longer be required (though this may take several hours or days). Monitor for patches.

More info here: https://calif.io/java4shell/

If you want to receive pings when new CVEs like this impact the community, you can join the Admincraft Discord and self-assign the Security pings role.


r/admincraft • • 21h ago

News Java4Shell - OpenJDK Vulnerability (Remote Code Execution)

54 Upvotes

FYI: https://calif.io/java4shell/

I will be taking my servers down as a precaution, wanted to share this to everyone to prevent compromise.

It looks like the best current fix is to add -XX:UseAVX=2 on x86-64 hosts to your server startup scripts. But, do your own research.


r/admincraft • • 4h ago

Help/Question Can Ryzen 3 7320u Laptop with 16GB RAM run a server?

2 Upvotes

I have a Ryzen 3 7320U laptop and i plan to make a server with around 30-40 plugins. most of them are around 300-600kb~ish and 4 are above 3mb.

Can i run this using headless linux server and a local pterodactyl panel at the same time? if so how many players can this run and how can i improve it? can anyone give me a heads up on what i will encounter and tips? thanks!


r/admincraft • • 11h ago

Discussion I'm building Nebo, a Minecraft proxy written in Rust (1.16.5 – 1.21.11) – early test build, looking for feedback

0 Upvotes

Hi everyone! I'm building Nebo, a Minecraft proxy core written in Rust. It is built around the 1.16.5 protocol and accepts clients from 1.16.5 up to 1.21.11, so players don't have to look for a specific client version.

What it has so far

  • Built-in captcha that players must pass when joining
  • Basic bot protection
  • Built-in limbo server where players wait while they are being checked

Current status

This is a very early test build (v0.1.0) and not a final version. Connecting to the limbo is still unstable on some versions, and player packet validation is not finished yet. Please don't use it on production servers.

Project info

Nebo is completely free, open source (MIT license), and has no monetization of any kind.

LLM disclosure

The README and this post were written with the help of an LLM. The code was written by me.

I would really appreciate feedback, bug reports and ideas. I plan to keep maintaining and updating the project.

Repo: https://github.com/zxctako25/Nebo


r/admincraft • • 15h ago

Guide 3 things that changed in Minecraft 26.x that make old server guides fail

0 Upvotes

If you've followed a server setup tutorial recently and the server wouldn't start, it's probably not you — the rules changed this year:

  1. **Version numbers are year-based now.** 26.1, 26.2, 26.3 instead of 1.21.x. Any guide "for 1.21" is a generation old.
  2. **Java 25 is required for 26.1+.** On Java 21/17 you get `UnsupportedClassVersionError` and an instant crash. Quick map: 26.x → Java 25, 1.20.5–1.21.11 → Java 21, 1.18–1.20.4 → Java 17.
  3. **The whitelist is ON by default since 26.3.** Your server can be perfectly healthy and friends still get rejected until you run `whitelist add <name>` (exact name, case-sensitive) in the console.

Those three accounted for almost every "server won't start / friends can't join" thread I've seen lately. Hope this saves someone an afternoon.


r/admincraft • • 1d ago

Help/Question How do servers like DonutSMP make their custom /settings UI? (Paper 1.21)

2 Upvotes

Hey guys,

I'm working on my own survival server and trying to make a custom /settings plugin. I know basic Java and usually rely on AI to help me put plugins together, but I'm stuck on two things:

  1. How do big servers like DonutSMP actually make those clean, modern settings interfaces instead of a basic chest GUI? Is it handled with ProtocolLib/packets, or something else in Paper?
  2. I'm also having a hard time coding a per-player mob spawning toggle (where a player can disable mobs spawning near them without breaking it for the rest of the server).

If anyone knows how that UI setup is usually done or can point me in the right direction, thanks in advance!


r/admincraft • • 2d ago

Help/Question Frequently crashing with Integraded boogaloo on a small server

0 Upvotes

Hello im trying to run a small server with the Integrated boogaloo modpack for some friends. Ive been having s lot of issues with crashes and on the curseforge page it said to have at lease 6gb of ram, we have 8 but we still find it crashing a lot. Our frends trdies it out in singleplayer with no crashes. Im not sure what the issue could be, im using apex hosting with a server close to our location. I know its an intensive modpack but im not sure why we've been crashing so often. If anyone has any experience with the pack and may know some issues when it comes to hosting please let me know.


r/admincraft • • 1d ago

Software Resource I built a self-hosted Minecraft server manager that handles mods and modpacks the way Prism Launcher does. Looking for feedback from people who run servers.

0 Upvotes

Hey r/admincraft. I've been working on Isopod, an open-source (MIT) dashboard for running Minecraft servers on your own hardware. I got tired of using Crafty and similar server management tools for mods so I decided to create my own.

What it does:

  • Instances like Prism Launcher: each server is its own instance, with its own version, loader, and mods
  • Loaders: Vanilla, Fabric, Forge, NeoForge, Quilt, Paper, Purpur, Folia
  • Modrinth mod search built in, with automatic dependency resolution, warnings for loader/version mismatches, and client-only mods hidden
  • Modpacks from Modrinth or CurseForge in one click (CurseForge needs a free API key)
  • Bedrock: native Bedrock Dedicated Server, or a toggle that installs Geyser + Floodgate so console/phone players can join Java worlds
  • Pre-update snapshots: before you change the MC version, loader, or mods, it snapshots world + mods + config so a bad update is a one-click rollback
  • Crash watchdog: auto-restart, stops after 3 crashes in 2 minutes, and shows a crash report with suspected mods
  • Scheduled world backups with retention, a live console with RCON, and a file manager

It runs on Docker (one compose file) and uses itzg/minecraft-server under the hood. The dashboard serves plain HTTP and controls Docker, so keep it on your LAN or behind a VPN. Don't port-forward it.

LLM disclosure: I used AI coding agents (mainly Claude) heavily while building Isopod. I wrote the plans and specs, reviewed the changes, and tested everything on my own servers. Every PR and release also goes through an automated security audit.

GitHub: https://github.com/Isopod-Project/Isopod

It's at v0.4, so expect rough edges. Bug reports and feedback on what's missing are very welcome, either here or as GitHub issues.


r/admincraft • • 1d ago

Software Resource I made an open-source tool that makes AI coding assistants test Paper plugins on a real server and in-game

0 Upvotes

AI disclaimer: mcflow is a tool for building plugins with AI coding assistants (mainly Claude Code), and most of mcflow’s own code was written with Claude Code under my direction and review. If AI-assisted development isn’t your thing, fair enough, this post probably isn’t for you.

AI coding tools are fast at writing Paper plugins, but they guess a lot. They make up APIs and use methods from the wrong version, and they tell you something works without ever running it. mcflow is my attempt to fix that by giving the AI a fixed way of working:

What it does

  • mcflow init sets up a workspace for your target Paper version (1.17 or newer): workflow rules for Claude Code (plus AGENTS.md for other AI tools), skills, helper agents, and folders for plugins, resource packs, research and assets.
  • mcflow doctor checks your setup and tells you exactly what to install. It looks up which Java your Paper version needs and finds the JDKs you already have.
  • A local test server the AI controls through an MCP server: start, stop, restart, run commands over RCON and read logs. It never uses /reload.
  • Test bots that join, chat and move around, plus swarm load testing and spark integration.
  • Real in-game checks through a small Fabric client mod (1.17 to 26.3), so the AI can look at what it built, like a custom GUI, instead of assuming it’s right.
  • A shared knowledge base of techniques that were proven in tests or in-game, each tagged with the Minecraft versions it was proven on. It’s shared through GitHub pull requests, never direct pushes.
  • Code search for the AI through TokToken, downloaded from TokToken’s official releases and checksum-verified.

Install (Python 3.11+ and pipx):

pipx install git+https://github.com/LadonON/mcflow.git@v0.1.0

Works on Windows, macOS and Linux. CI runs a real Paper server through the whole flow on all three. The in-game checks need a Minecraft Java Edition account.

It’s MIT licensed and this is the first release, so expect rough edges. I’d really like feedback from people who run servers or write plugins: what would make you trust an AI-written plugin enough to put it on a production server?

GitHub: https://github.com/LadonON/mcflow


r/admincraft • • 4d ago

Help/Question Minecraft Radmin VPN issues after PC upgrade — huge ping spikes and keepalive timeouts

3 Upvotes

Radmin VPN causes extreme ping spikes, packet loss and Minecraft keepalive timeouts

Hi everyone! I'm looking for help diagnosing a strange Minecraft networking issue that started after a PC upgrade.

We use Radmin VPN for Minecraft multiplayer, but one specific computer has been experiencing serious connection problems.

Original issue

After upgrading his PC, my friend started experiencing extreme ping spikes whenever he connected to a Minecraft LAN world through Radmin VPN.

His character would freeze, chunks would stop loading, and he would eventually fall into the void and get disconnected.

Initially, we suspected a connection issue between our two computers. However, the exact same thing happened when he connected to another person's Minecraft LAN world through Radmin VPN.

We tested Tailscale as an alternative, and everything worked perfectly.

After extensive troubleshooting, regular Minecraft LAN connections through Radmin VPN eventually started working normally again.

Currently, LAN worlds work without any issues. However, the problem still occurs with a dedicated Paper server.

Current issue

The dedicated server runs Paper 1.21.11 on a separate computer and is accessed through Radmin VPN because the host's ISP doesn't provide a public IPv4 address.

The problem only affects one specific client. All other connections work normally.

When the affected client connects:

  1. The initial connection succeeds.
  2. The player completes password authentication.
  3. Latency increases from approximately 60–70 ms to 200–350+ ms.
  4. Severe lag and packet loss occur.
  5. The connection eventually times out.

The server console displays:

"was kicked due to keepalive timeout"

"lost connection: Timed out"

Affected PC specifications

- CPU: Intel Core i7-12700F

- Motherboard: ASUS B760M WiFi

- RAM: 32 GB DDR5 (16 GB allocated to Minecraft)

- OS: Windows 11

- Network adapter: Intel Wi-Fi 6E AX211

Additional details

- The affected computer is located in Germany, while the server is hosted in Ukraine.

- The issue appeared after the computer was upgraded.

- Radmin VPN normally reports approximately 60–70 ms latency.

- Severe latency spikes and packet loss appear during Minecraft connections.

- Other online games, including CS2 and Roblox, work normally.

- Other Minecraft clients have no connection problems.

- Regular Minecraft LAN connections through Radmin VPN now work correctly.

- Tailscale worked correctly even when Radmin VPN was experiencing problems with LAN worlds.

What could be causing this?

Could this be related to Radmin VPN's networking implementation, the Intel AX211 adapter, Windows 11, MTU, or TCP packet handling?

The most confusing part is that regular Minecraft LAN connections now work perfectly through Radmin VPN, while connections to the dedicated Paper server still experience severe packet loss and timeouts.

Has anyone encountered similar behavior or found a solution?

Any technical suggestions would be greatly appreciated. Thanks!


r/admincraft • • 4d ago

Discussion Confirmed workaround for BDS NetherNet InitialConnection-145 on LAN consoles

3 Upvotes

I thought this might be useful to other people running a vanilla Bedrock Dedicated Server since the move to NetherNet.

I have been able to reproduce, and automate, a workaround for the Boat / InitialConnection-145 error when consoles try to join a BDS through normal LAN discovery.

My current setup is:

BDS 1.26.63.1 on Ubuntu/Docker
transport=nethernet
online-mode=true
allow-list=true
LAN visibility enabled

The original problem was very consistent.

After BDS starts, it loads normally, signs into the NetherNet signaling service and reports healthy. An Xbox on the same LAN can see the server under LAN games, but attempting to join fails with the dreaded Boat / InitialConnection-145.

The failed console attempt does not even reach the normal player connection stage in the BDS log.

This appears to be the same issue being tracked as BDS-23108.

Workaround

I found that making one successful authenticated NetherNet client connection directly to the BDS after startup appears to "prime" the running server.

I used bedboo, a Bedrock client library with NetherNet support, and set up a small authenticated headless client using one of the allow-listed Microsoft/Xbox accounts.

After BDS starts, the client connects directly to the server on the LAN, successfully enters the world, then disconnects.

The BDS log records:

Player connected
Player Spawned
Player disconnected

Immediately after this has happened, the Xbox can join the LAN server normally.

The important part

The effect appears to last for the lifetime of that BDS instance.

If BDS is restarted, the Boat / InitialConnection-145 problem returns.

Run the authenticated connection once again and console LAN joining works again.

Because my server is restarted during its daily backup, I have now automated the process so that after the restart the headless client waits for BDS to become healthy, connects, spawns and disconnects.

The same primer also runs automatically following a reboot of the physical server.

Unattended test

This has now worked during an actual scheduled unattended backup/restart.

The server restarted at 05:00, the authenticated client connected and spawned at approximately 05:01, then disconnected.

Nearly 16 hours later, without another primer connection or BDS restart, a different player joined successfully from a PlayStation 5 through normal LAN discovery.

The PS5 was on the same LAN as the BDS. This was not a remote or tunneled connection.

So far I have therefore confirmed the workaround with both Xbox and PlayStation 5 LAN clients.

What this seems to show

There are already reports under BDS-23108 that one successful direct client connection after BDS startup can cause subsequent console LAN connections to start working.

My testing seems to confirm that behavior and shows that the initial connection can be automated rather than requiring somebody to manually join from a PC or mobile device after every restart.

It does not fix the underlying NetherNet problem. It appears to put the running BDS instance into whatever session/signalling state is missing immediately after startup.

Importantly, this does not require disabling online authentication or the allow-list. Both remain enabled on my server.

If anyone else running vanilla BDS with Xbox, PlayStation or Switch LAN clients is seeing InitialConnection-145, I would be interested to know whether the same one-connection "prime" works for you.

Next step will be looking into remote access as my PlayIt tunnel was nuked with the loss of RakNet. I'm going to look into Waterdog.


r/admincraft • • 5d ago

Help/Question G’day, me and some friends are trying to build a server on a tight budget.

2 Upvotes

We have a spare i5-10400, and a 8gb ram stick, but we don’t know if we should:

A) Use the i5 and upgrade ram to 16gb;

B)Buy an xeon/old i7 that runs ddr4, and upgrade to 16gb;

C)Buy a xeon that uses ddr3 which would be cheaper;

And one of the xeons we are considering is the e5-2690 v2 & v4, v2 which runs on ddr3, and other xeons.

Edit:we’ll be running 100-200 mods, but it’s a 4-7 player server


r/admincraft • • 6d ago

Software Resource Locate Plus: /locate anything, not just structures. Server-side, now on Fabric, NeoForge and Forge

10 Upvotes

I posted this a month ago as a Fabric mod. Since then it's picked up NeoForge and Forge and two more Minecraft versions, so figured it was worth a second post for the people who passed on it the first time because of the loader.

What it does: you type /locate block diamond_ore 64 blocks and it tells you where the nearest one is, draws an outline on it you can see through the ground, and gives you a button that teleports you somewhere you can actually stand. Same for entities (/locate entity #skeletons 10 chunks) and items (/locate item diamond — digs through chests, shulkers, frames, mobs, the floor, player inventories). There's also an area survey that counts everything in a radius and writes the coordinates to a file, and an inspect command that tells you a block's light, redstone, spawnability and container contents.

It's server-side only. Players don't install anything. Results go only to the person who ran the command, big scans are sliced across ticks so the server doesn't hitch, and nothing is force-loaded unless you add forceload yourself.

Loaders: Fabric, NeoForge, Forge on 1.20.1–1.20.4 and 1.21–1.21.1. 1.21.11 and 26.1–26.1.2 are Fabric for now, others soon.

Also shipping 2.2.2 today, a bug-fix release. The one worth calling out: if a server was stopped hard in the middle of a forceloaded scan, those chunks could stay force-loaded permanently. That's fixed: chunks are now held in memory only for as long as the scan needs them and released afterwards; the world file is never touched. Full changelog on the download pages.

Modrinth: https://modrinth.com/mod/locate-plus
CurseForge: https://www.curseforge.com/minecraft/mc-mods/locate-plus
Source (LGPL): https://github.com/forestmask/locate-plus

AI use: this post had help from AI with grammar. AI had no involvement in the mod itself.


r/admincraft • • 6d ago

Software Resource Minecraft Sound Browser – hear any Minecraft sound right from your code in IntelliJ (Plugin Demo)

0 Upvotes

Ever written Sound.ENTITY_PLAYER_LEVELUP, launched the server, joined, triggered it – only to realize you wanted ENTITY_EXPERIENCE_ORB_PICKUP? I got tired of that loop (and of alt-tabbing to the wiki), so I built a free, open-source IntelliJ plugin that lets you preview every Minecraft sound without leaving the IDE.

Demo (50 s): https://youtu.be/De9SJF3p-5I

Screenshot: https://raw.githubusercontent.com/DverkaSK/minecraft-sound-browser/main/docs/screenshots/overview.png

Play button sounds straight from your code

  • A small button appears right after every sound reference – click it and a mini player opens under the line
  • Works with every major platform:

    • Sound.X – Bukkit / Spigot / Paper (including pre-1.9 names like Sound.LEVEL_UP)
    • SoundEvents.X – Fabric (Yarn) and Mojang mappings (NeoForge / Forge / Paper internals)
    • SoundEvent.X – Minestom, SoundTypes.X – Sponge
    • static imports (import static org.bukkit.Sound.*)
    • string keys: "entity.player.levelup", "minecraft:entity.player.levelup" (Adventure, commands, datapacks)
  • Your own custom sounds too – everything in your project's assets/<namespace>/sounds.json (ModSounds.BOSS_ROAR, "mymod:boss.roar") plays from your local .ogg files
  • Java, Kotlin, Groovy, Scala, JSON and plain text (.mcfunction)

🔎 A full sound browser

  • Every sound event of every release since 1.7.2 (snapshots optional) – switch versions in one click
  • Organized into categories: Blocks › anvil › place, Entities › zombie › hurt, Music Discs, Interface…
  • Search understands every naming style: zombie hurt, entity.zombie.hurt, ENTITY_ZOMBIE_HURT, minecraft:entity.zombie.hurt
  • Favorites for the sounds you keep coming back to

🎧 Previews that sound like in-game

  • Interactive waveform – click or drag to seek; play/pause, replay, loop
  • Step through every variant of a sound event, or pick a weighted random one like the game does
  • Live pitch (0.5×–2.0×) and volume that match the arguments of playSound
  • Per-file volume/pitch from sounds.json applied, so what you hear is what players hear

📋 Copy in the format you need Key, namespaced key, Bukkit constant, a ready player.playSound(...) call, Adventure Sound.sound(...) or a /playsound command – with your current pitch already filled in.

🪶 Lightweight

  • Nothing bundled: sounds are fetched on demand from Mojang's official servers (respects IDE proxy), SHA-1 verified and cached
  • Anything played once works offline
  • Works in any IntelliJ-based IDE 2024.3+, Community edition included
  • MIT-licensed

Get it:

Feedback, bug reports and feature ideas are very welcome – especially if your platform or mapping isn't detected yet!


r/admincraft • • 6d ago

Help/Question Is port forwarding safe for minecraft?

9 Upvotes

I host a private Minecraft server for my friends and me. It's running locally on my main gaming pc and I use port forwarding via my Xfinity router/modem that I rent from them. Is this safe? I don't use the default Minecraft server port, and I have a whitelist on. I was also wondering if, on the Minecraft server, there's a log file of logins/login attempts


r/admincraft • • 7d ago

Help/Question Cheap/good way to obscure IP for small server I am running.

4 Upvotes

Hello all,

I am only moderately tech sav, and have run a Minecraft server for my direct friends before. However i would like to run one with some online friends, and am a little uncomfortable with just broadcasting my IP address.

I have googled and seen some "tunneling services" but I do not know what exactly the set up process of some of these looks like. I have never used a command line program before and get a little lost when attempting set up.

So I would like to ask for some ideas on how to set this up/ recommended ways to do so.

I would also like to ask for advice on how to set up a discord bot to restart the server remotely if it crashes as this will be a modded server.

Edit: I ended up going with Playit for a way to run it on my machine


r/admincraft • • 7d ago

Help/Question Viability of using a M1 macbook air for self hosting a server

3 Upvotes

Basically the title, I have an old M1 macbook air that I recently started using again as a secondary home server of sorts, started using it for a very rough file storage and remote access server at home and was wondering how viable it would be to self-host a minecraft server on it.

I've used aternos before and it has been fine but there are definitely cases where the server was laggy or struggled when I was playing, and given that I have the M1 lying around(I use a separate M5 air) I was wondering how much more effective it would be.

EDIT: It is an M1 macbook air with 8GB of ram and 500GB of internal storage, recently wiped so storage is fully empty.


r/admincraft • • 7d ago

Help/Question Morespearenchants plugin deletes the players inventory and enderchest when removed

1 Upvotes

I want to remove the Morespear enchants plugin because it's op and annoying but whenever i try to do so the players enderchest gets deleted

Paper 26.2 is there a way to remove the enchants from the weapons even of offline players plz and thank you


r/admincraft • • 7d ago

Help/Question Hardware Requirements for an Upcoming Minecraft Survival Server

0 Upvotes

Hello,

I’m looking for advice on the hardware requirements for a Minecraft survival server scheduled to launch in about a month. The server is not open yet, but our Discord community currently has around 200 members and is growing. I expect a launch peak of approximately 70 concurrent players, with around 30–50 concurrent players afterward.

The server will run Any Optimized Paper Fork, with performance optimizations including asynchronous mob spawning and pathfinding, as well as entity limits.

I expect to use around 40 plugins. Most are administrative, such as LuckPerms, Vault, and LiteBans, or focused on improving the player experience without being especially resource-intensive. These include AuraSkills, BetterEnchants, EMF, Nexo, and LandClaimPlugin. The gameplay will be mostly standard survival, with a few light RPG elements rather than a heavily RPG-focused experience.

I also plan to pre-generate a 35,000 × 35,000-block area around spawn and use the Terralith datapack for custom world generation.

In summary, the server is planned for:

- A launch peak of around 70 concurrent players, with 30–50 expected afterward

- Around 40 plugins

- Optimized paper fork with performance optimizations

- A 35,000 × 35,000-block pre-generated area

- Terralith custom world generation

- A launch in about a month

What hardware would you recommend for these requirements?

Thank you for your time and advice.


r/admincraft • • 8d ago

Help/Question My roommate wants 2 dedicated cores and 4GB for our 6-player Paper server, I want 4 shared vCPUs and 8GB

16 Upvotes

Same money either way, roughly $25 a month split five ways, and we've been going back and forth on it for a week.

Right now the server runs on one roommate's gaming laptop and only exists when he's awake. Dorm wifi blocks inbound, so port forwarding was never an option. playit worked but the guy who plays from his parents' place on weekends kept rubberbanding on it. We all graduate in May and after that half of us will be on the East Coast and the rest in Texas or California, so we want something that stays up 24/7 and anyone can hop on whenever.

What I think changes the answer:

- 5 of us, peak 6 if someone brings a friend, usually 2-3 online at night

- Paper 1.21.x, no mods. Plugins are CoreProtect, LuckPerms, Simple Voice Chat and a couple of QoL ones

- World is about 9GB, a few farms but the big mob farm is the heavy one. Two people basically live on elytra

- View distance 10, simulation distance 6

- Linux is fine, I'm the one who'll be running it

My side: RAM is what hurts us now. The laptop gives Paper 4GB and we get GC stutters every time someone flies into new chunks. With 8GB I'd give the server 6, pre-gen a border with Chunky and be done. 6 players on Paper doesn't need dedicated cores imo.

His side: shared vCPU means noisy neighbors right when the mob farm is running, Minecraft mostly cares about single-thread anyway, so 2 real cores with 4GB and tighter flags would feel smoother.

Which one of us is wrong here? And with people spread across both coasts, is there a location that's tolerable for everyone or does somebody just eat 80ms?


r/admincraft • • 8d ago

Help/Question Synchronizing real-world seasons with Minecraft server (Aternos), looking for the best setup / plugin configuration

2 Upvotes

I am running an Aternos server and I'm trying to figure out the best way to sync Minecraft seasons with real-world seasons (so when it's winter or autumn in real life, the server matches it automatically)


r/admincraft • • 8d ago

Help/Question Language Files Easy Accurate Translate?

0 Upvotes

Bit of an odd one, but I have changed several US English languages files for my server's required resource pack. Mostly renaming and repurposing "dead" items.

My question is, is there a way to easily translate my edited files into other languages?

If not, what languages do you suggest I edit manually as someone going to publish through curseforge and host in Virginia USA through Apex Hosting?


r/admincraft • • 9d ago

Help/Question Best way to host a server on 10 devices?

20 Upvotes

Hi, me and some friends have a private server we do every summer. This year, we want to upscale a bit. Our school was going to throw away some old devices, but we were able to convince them to give them to us. Turns out, there's quite a lot of processing power in them.

We want to host our server using these, but finding a motherboard to fit the RAM is too expensive. That would be a last resort, so we don't want to go that route. We're thinking of somehow using all 10 of the machines to host it (as we're using some pretty resource intensive mods like jjthundertothemax). Is there a definitive best way to "frankenserver" everything together?


r/admincraft • • 8d ago

Discussion Mob and Item Clear Mod for Neoforge Minecraft 1.21.1

0 Upvotes

Im used to my server being Fabric based, but recently we changed to Neoforge. I expect there to be a popular entity clearing mod, such as SkiesClear, but cant find one on Modrinth. The only requirements I have for this kind of mod are: Neoforge, Minecraft 1.21.1, and to be able to clear dropped items, hostile mobs, and cobblemon at a configurable time.