r/bonecollecting • • Sep 12 '20

Advice Processing a Carcass 101 - the bones of bone collecting

1.2k Upvotes

Ok, so given how many comments we get requesting info on how to process a carcass, I figured it was time to update the stickie for this topic. Enjoy and, as always, feel free to comment and I will append this as needed. Just a reminder to A) always check your local and federal laws to make sure it is legal for you to possess parts of the animal, and B) if you are in an area prone to rabies or other diseases (rabbits and tularemia, armadillos and leprosy, etc), please take adequate precautions when handling dead animals, especially fresh carcasses. Always use gloves when handling a fresh carcass.

HOW TO PROCESS A CARCASS

There are generally three steps in the process of rendering a carcass down to a skeleton: 1) defleshing, 2) degreasing, 3) whitening. In general, these three steps are most effective when done sequentially. Two main things to remember during the process – Chlorine bleach should NEVER be used in any step of this process, and cooking bare bones will fix the grease and potentially cause long-term damage to the bones. Below are a few good guides for processing a carcass for you to take a look at.

http://www.jakes-bones.com/p/how-to-clean-animal-bones.html

http://baccyflap.com/txt/natmat/bones/

http://www.nara.accu.or.jp/img/elearning/2011/animal.pdf

http://bone-lust.blogspot.com/2015/05/bonelust-q-ive-been-macerating-bones.html

DEFLESHING

In general, the more flesh and skin that is removed, the faster the defleshing step is and the less smell you will have. Once you finish defleshing, you will want to pick clean any remaining soft tissue with tweezers, a scalpel, brush, etc before moving on to the degreasing step.

Open Air - This is easily the fastest method for defleshing. Using this method, you let the carcass rot naturally on the ground and let the flies and other insects work their magic. To do this technique, it is highly recommended that you use a locking cage to keep out scavengers that will be drawn to it. You simply put the carcass in the cage or fenced in area. You do not need to deflesh, skin, or gut the animal first for this to work, in fact the skin can help keep the moisture in. Sometimes it helps to poke a few extra holes for the maggots to get in. There are a few major drawbacks to this technique 1) the smell is awful and your neighbors will hate you, 2) you have to keep the carcass moist for the maggots to keep working, or you will end up with a mummified carcass, and 3) you will develop a fly problem. So, this is better done in a more warmer and more humid climate (doesn't work so well in a desert), and you only want to do this if you have adequate land and distance from your residence (and neighbors, think about your neighbors). Once the skeleton is reasonably clean, remove the bones and rinse them off.

Dermestids – great method if you have the ability to sustain a colony, and works well in the winter if you have a heated set-up. Rather than go through this process, here is a great link that goes over it. Be forewarned, dermestids will smell and do require you to keep feeding it as they are living creatures. If you do not properly ventilate, clean, or feed them, they will find a way to swarm out of their enclosure and I speak from personal experience when I say that you don’t want that to happen. Note that this is the only one of the defleshing techniques that will keep fish, birds, lizards, and small mammal skeletons somewhat intact. The other techniques mentioned below will result in disarticulation.

https://www.natsca.org/sites/default/files/publications/JoNSC-Vol7-Munoz-Saba_et_al_2020_0.pdf

Burying – this technique works best when you have a piece of property to do it on, have time, and can reasonably protect the carcass from scavengers. It also is the easiest for cleanup and has the least smell, and is a great method for when you are dealing with a whole carcass from a larger animal. This method also works with smaller animals, like rodents, if done in a flowerpot. You will still want to skin and deflesh as much as possible beforehand, and you’ll want to keep the soil slightly moist. With burying, there are two primary concerns: scavengers and loosing parts. To prevent scavenging, try to bury at least 2 ft (60 cm) deep (or deeper if sandy soils) and place larger rocks above the carcass to act as a barrier to digging. To prevent the loss of smaller elements, consider placing a wire mesh below the skeleton. The time it takes to decompose depends a lot on the local soil conditions (soil type, soil temperature, soil moisture, soil acidity), but will generally be several months for a larger carcass. I have heard of people adding bacteria (yeast) or compost to the carcass to help speed the process along. Oh, and one last helpful tip…place a clear marker over the pit so you can find it again when it is time.

Maceration – the smelliest method, but highly effective and you can use the same container the entire way through the process. You will want a large container with water, and a way to keep the water on the warmer side (over 70 F/21 C). If you can stomach it, stirring the pot every day will help with the maceration process. You will want to do pour-off’s (replacing the water) regularly initially as the water becomes too fouled (and to remove chunks of soft tissue that will invariable float around), and this is where the most offensive, gag-inducing, eye-watering, curse-laden part of the process will occur. But as the decomp gets farther along, do fewer pour offs. With each pour off, you are reducing the amount of bacteria for digesting the soft tissue. As long as there is plenty of food available, they will repopulate (try to leave some of the scum with each pour off to allow faster recovery of the bacterial population). If the water is allowed to get too cold, the decomposition process will stop and, even worse, you will convert the fats to adipocere (bone wax) which is very difficult to remove. Under ideal conditions, you can easily render a fleshed animal to bones in a few weeks using this method. You don’t necessarily need to deflesh for this technique to work (and I have found that having the bacteria from the stomach contents helped things along), but you do want to skin the animal. Stirring the mix also will aid in speeding up the process. If at all possible, try to keep the buckets out of direct sunlight to keep the algae from growing (I throw a tarp over my bins).

I am going to add in a caveat here since we see it so often - DO NOT ADD ANTIBACTERIAL DISH SOAP OR HYDROGEN PEROXIDE AT THIS STEP. You need bacteria to digest and break down the soft tissue. These two things make the environment hostile to bacteria causing it to take substantially longer to process. The only thing that you can add to help the process along is enzymatic detergent, which brings us to the next method.

Enzymatic Detergent Maceration - You also can add an enzymatic detergent (BIZ is one example) to the water to aid in the process. u/octane80808 has a great summary of the use of enzymatic detergents in the comments section that I have copied sections of here: "For anyone in Europe, we have enzyme-based washing powders [mod note - Biotex in Europe, powdered Biz w/out bleach in US]. I've been using it for years and I can't imagine it doing any other way. It's essentially an all-in-one method, as it dissolves the tissue, but also the fat, so it degreases at the same time. There's no need to whiten the bones afterwards, they come out perfectly clean (there is no bleach, or whitening agent present AFAIK, so it's all natural). The only downside is that any cartilage also dissolves. So for fish, birds, young animals, or small animals, you'll be spending an afternoon gluing the bones.

I also clean my skull manually during this process. Depending on how impatient I am, and how much free time I have, I take them out of the solution every day to every other day. I remove the tissue I can remove without disturbing the skull too much. And I refresh the solution. So a new spoonful of washing powder, and warm water. The latter also helps to speed up the process, as higher temperatures seem to be favourable. By refreshing the solution every day, I can usually clean a skull within one or two weeks...renewing the solution isn't necessary, it will just take a lot longer.

The washing powder is relatively cheap, and it comes in large boxes. You only have to use a teaspoon or tablespoon, depending on the size of the container/skull. So it lasts quite a long time as well..Note that the bone may feel soft after this step, especially if processing a bird or fish. It is better to allow the bone to dry before handling as this will re-harden the bone. Also, bones may turn black during this process if the water isn't changed regularly enough. Do not worry, you can treat this discoloration during the "Whitening" step."

Simmering/Cooking – this method ONLY should be used with larger animals, and can be effective when you have a carcass that is dehydrated jerky. The reason is that high heat will warp bones, and will fix the grease in the bones making step 2 (degreasing) incredibly difficult. Never use this step with birds, fish, and small mammals. To use the boiling method, you actually want your carcass to have flesh, but gutted, in order to protect the bones. Place the carcass into the boiling water and allow the water to return to a low simmer, then remove from heat. Leave the carcass in the water for only as long as it takes for the flesh to “cook” (if you are boiling for an hour, you have ruined the bones). Remove from water and the flesh should come off easily, although internal tissues (like the brain or inside the nose) will still be adhered. You can use a pressure washer or hose with a good nozzle to try and clean off the hard-to-reach areas. Be extremely cautious using a pressure washer as it will blast more fragile bone to pieces and can easily destroy a skull.

DEGREASING

You will need a degreasing agent for this step, most of the liquid dish soaps will work great here, just avoid the opaque ones or ones with strong colors (colorless and clear work great and won't dye the bones). Laundry soap often doesn’t work as well, and some will dye the bones. The exception to this is enzymatic detergent (in the US this is sold as BIZ), which works well as a degreaser. This step requires a container big enough for you to submerge the remains in. Add water and soap – how much soap is up to you and depends on the amount of grease in the bones. You will need to change the soapy water as it becomes cloudy, generally at least once a week. Continue this process until fully degreased – i.e., the water doesn’t cloud after a week. This is the longest step, and will take much longer than you think. If you see any yellowing or oily spot on the bone, then it still needs degreasing.

You can substitute acetone or ammonia for dish soap as the degreasing agent, but both have their safety issues. Ammonia is an irritant, so only use ammonia if you have a respirator. Also, be careful when emptying the liquid as household ammonia will kill vegetation.

Acetone also can be used, but you cannot dilute it with water. As a result, acetone is often more expensive that using the other two agents, and as a bonus it can melt plastic, so you will want to use a different type of container than a plastic bucket. It also dissolves nitrile and latex gloves, is flammable (no heating the liquid), and the fumes are toxic, so there is that. Also, acetone will evaporate, so the container needs to have a tight lid. If used correctly, you can treat multiple batches of bones with acetone, and acetone works faster than other methods. Lastly, acetone can’t be disposed of down the drain because of it’s toxicity and remember that bit about dissolving plastics…like your drain pipes?

WHITENING

After the bones have been degreased, you may wish to whiten the bones. This is not a necessary step, and is mainly cosmetic though it does help to sterilize the bones. You can use 3% hydrogen peroxide from the store, and it can be found in higher concentrations as hair developer, which is up to 12% hydrogen peroxide. Other options for obtaining hydrogen peroxide are from a pool supply store, though you have to be careful that it isn’t mixed with other chemicals. The important things to remember during this step is that A) hydrogen peroxide will degrade quickly when exposed to sunlight, and B) hydrogen peroxide degrades rapidly when exposed to heat, C) hydrogen peroxide will degrade faster when exposed to air. So, it works better when covered and not in direct sunlight.

Simply submerge the bone in the hydrogen peroxide until you reach the desired whiteness. If using 3% hydrogen peroxide, it isn’t necessary to dilute the liquid. Higher concentrations may require dilution as it is a powerful oxidizer.

An alternative method to submerging in hydrogen peroxide is sun bleaching. Note that this exposes the bones to the elements, and you lose a lot of control over the whitening process. It also takes considerably longer than the hydrogen peroxide approach.

NOTE: Chlorine Bleach should NEVER be used to whiten bones. Chlorine bleach degrades the bone collagen, which is the protein component of bone that holds the mineral component (hydroxyapatite) in place. This will leave the bone brittle and powdery, and the bone will continue to degrade over time. The effects are irreversible.

DRYING

I add this as a last step as this is a critical step where mistakes are often made. Bone is a porous material that contains organic components. If dried too rapidly, those organic components can shrink, or parts of the bone may dry faster than other parts. This can result in cracking, warping, and delamination of the bone. In general, let the bones dry slowly and out of the sun. Do not bake or expose it to high heat, or attempt to speed up the process. You may notice teeth cracking during the drying process. This is not uncommon, and you can glue the teeth back together after they drying process is complete.


r/bonecollecting • • 2h ago

Art Bear skull and otter skull pendants :D

Thumbnail
gallery
14 Upvotes

After the feedback from my wolf skull pendants I’ve made more! I’ve made the sutures in the skull more visible and studied skull anatomy so it’s more accurate.


r/bonecollecting • • 19h ago

Bone I.D. - N. America Skull id?

Thumbnail
gallery
304 Upvotes

My aunt was gifted this. Google has given me opossum, raccoon, and mountain lion lol. I’m leaning toward opossum but huge. The second pic is next to a fox skull for size reference


r/bonecollecting • • 10h ago

Bone I.D. - Australia/NZ Skull ID-SE QLD

Post image
36 Upvotes

Found near Oakey QLD. Thought hare but doesn’t look right. About 15 - 20 cm long skull


r/bonecollecting • • 4h ago

Bone I.D. - N. America Juvenile deer?

Thumbnail
gallery
8 Upvotes

Is that a milk tooth?


r/bonecollecting • • 20h ago

Advice Help what is this

Thumbnail
gallery
73 Upvotes

r/bonecollecting • • 1d ago

Art Crow articulations

Thumbnail
gallery
153 Upvotes

Since so many of you liked my cat, here are my hooded crow (Corvus cornix) skeletons! I haven't been able to find a single deceased crow for almost five years of me doing this, and then this summer I found six of them. We had a bad WNV (West Nile virus) outbreak and so many crows were affected. The virus is transmitted via mosquito bites or blood transfusion, so handling the carcasses was perfectly safe.

I have befriended around 50 crows all over the city and they recognise me and ask me for treats whenever they see me. All of my homies who are my most frequent customers and are well-fed didn't have any casualties, but other parts of the city were affected, some moreso than others. And this is why I would go out so frequently on my bike this summer to look for corpses. It was worth it.

I have two articulated for now, one is being degreased, one is in peroxide right now, one is in a box right next to me, and one is still in the freezer. Now if only this sort of thing was more popular around here, maybe I could even do this for museums or the zoo, but it's a critically endangered craft in these parts. Trust me, I have asked... the national museum's taxidermy section is struggling and is underfunded, so they can't employ me </3

In case anyone's wondering, I took these photos in the kitchen with some background prop trickery, but I don't have a good light source so I had to rely on my camera's flash. I seriously need to get some powerful lamps, I need lighting for much more than just taking photos of skeletons.

Feel free to ask me anything about this, I'll gladly answer!


r/bonecollecting • • 8h ago

Advice First time advice

Post image
3 Upvotes

I have no experience and am completely new to preserving/collecting bones but I have been very interested for a while now. I recently found a tiny lizard/gecko skeleton in a friends car and was absolutely geeked at the opportunity but I have no idea what to do with it. Could I simply order a resin kit off Amazon? if so is there anything I should do to prep? Any and all advice helps ty!


r/bonecollecting • • 6h ago

Bone I.D. - N. America Skull ID? Pretty confident it’s a cat skull

Thumbnail
gallery
2 Upvotes

Recently found this skull near a known cat colony and just wanted to confirm it is a cat. Also, if anyone is able to tell age, that would be great! Thanks!


r/bonecollecting • • 3h ago

Advice Digging up chicken bones

1 Upvotes

Hi all, hope I'm in the right place for this question. Sadly, one of my sweet pet chickens has passed and I decided to bury her to later collect her bones. I was wondering how long she should be should be in the ground before I can dig the bones back up. I have previously buried a squirrel and a kitten, but with the last one it turned out the little thing was in the ground for too long (bones were also decomposing) and I don't want that to happen to my chicken.

Any tips are welcome!


r/bonecollecting • • 21h ago

Bone I.D. - N. America ID please!

Thumbnail
gallery
18 Upvotes

hello! long time lurker, first time posting.
i was gifted this partial skull and the person that gave it to me does not know what animal it is. and i cannot seem to figure it out myself on google.
please help if you can! hand in photo for reference size. TIA!


r/bonecollecting • • 9h ago

Advice if i want to extract bones from a dried mouse carcass and a fresh rat carcass without gutting, which is the best method; maceration or bucket burial?

2 Upvotes

hi all! on my way from work, i found a dried up mouse carcass and then a rat carcass within the hour. they’re both sitting on my shelf wrapped up in napkins, sealed tightly in separate plastic bags. originally, i was planning to dig a 2-3 foot hole in my back yard, and allow nature to do it’s thing; but my roommate has a curious little german shepherd. and i fear he might dig them up and make a mess.. then i would have to awkwardly explain to said roommate that i’m planning to extract the bones as the horror unravels! and since i’m renting, i don’t feel that digging a hole in my backyard would be the most logical solution.

i’ve read on the subs faq and some online sources that burying in a flower pot or bucket, with drilled holes along the bottom and on the lid would be the best option! i wouldn’t have any problems with any curious critters disrupting my project. i plan to do 2 parts compost dirt from a garden shop and 1 part dirt from my backyard for my process. then wrapping the carcasses in some mesh stockings.

i read that you would have to gut the poor guy. the idea seems quite squeamish to me, but i understand if that’s what i need to do to get successful results, it has to be done. i also rather not be questioned by my roommates if they catch me gutting an animal. if i choose to burry my two carcasses in a bucket, is it possible to just burry them with no gutting necessary? but if i choose maceration, would the skin/organs still being intact be an issue? on that note, i do recognize that maceration water can have quite the oder! when disposing of the water, would it be best done in my backyard, or somewhere away from the premises?

any other advice is welcome, thanks!


r/bonecollecting • • 20h ago

Advice Is there anything special I should do to preserve a tooth?

Thumbnail
gallery
9 Upvotes

So, my cat broke the tip off her canine, so had to get it pulled today, and the clinic let me keep the tooth. Is there anything special I should do to make sure it doesn't start to rot or have issues? There is no flesh on it that I can see, and luckily there wasn't an abscess or anything similar yet. I also had absolutely no idea that the root of a cat's canine was so massive lol.

Cat tax at the end! Shes still completely stoned


r/bonecollecting • • 8h ago

Advice tips for bone collecting in Wales?

1 Upvotes

does anyone have any beginner's tips/guides on bone collecting or foraging in wales for someone completely new? preferably south wales but west area is also an option.


r/bonecollecting • • 17h ago

Bone I.D. - N. America Tidal bone ID - Western Canada

Thumbnail
gallery
4 Upvotes

Found two bones, approximately 6” and 12” respectively while beach combing along the ocean. Hoping someone can ID - maybe some kind of whale?


r/bonecollecting • • 1h ago

Bone I.D. - N. America Hi, my name is joedy cook I’m the Director of the North American Dogman project. Could I see pictures of the teeth? Could you turn the Skull over and send me some pictures if possible. Thank you.

0 Upvotes

r/bonecollecting • • 19h ago

Advice Deer bones turning black during degreasing?

Thumbnail
gallery
4 Upvotes

I have these deer bones that I found in the forest, been degreasing them for quite a while now, and they’ve turned black like this. What’s going on?


r/bonecollecting • • 2d ago

Art Fully articulated cat skeleton!

Thumbnail
gallery
590 Upvotes

Recently finished this cat that has been sitting in my storage for more than a year. He was an adult stray cat (no chip, not castrated, not treated for any of his injuries) who got hit by a car and passed away on the grass next to the road. He appears to have gotten hit (left side of the body), immediately turned around, got over the curb and then passed out. A hit from a vehicle to the chest can cause a lot of shock to the heart.

He had gotten several injuries throughout his life, such as a previously fractured lumbar vertebra, a broken rib, and several broken/lost teeth, including a nasty bone infection due to tooth decay. It saddens me to see how much these poor guys suffer when they're alone.

You can see that the ribs on his left side are a bit uneven. That's because they basically split and then intertwined improperly. The best comparison for it would be two converging tectonic plates, because of both bone and plate flexibility. I also did some basic sternal rib reconstruction out of wires. And the dentary can be removed and reattached because it's held together at the TMJ with magnets :DD This is my biggest articulation so far.


r/bonecollecting • • 18h ago

Bone I.D. - N. America Found in Central Texas

Thumbnail
gallery
2 Upvotes

Found this bone and thought it looked cool, looks like it is broken and might not be in good enough condition for anyone to properly identify. I am just curious, I suspect a leg bone, possibly from a deer but im not sure at all. I appreciate any help.


r/bonecollecting • • 1d ago

Bone I.D. - N. America Is this a bone?

Thumbnail
gallery
5 Upvotes

Was walking a beach in the Cape Cod area of Massachusetts and saw this large shape laying on the sand the tide had just come up so may have been brought with it but I’m unsure if it’s a bone or not. It’s quite light but still has a little weight to it and it seems to have a unique texture to it. To put in perspective it is larger than my whole hand.


r/bonecollecting • • 1d ago

Bone I.D. - N. America Spine and pelvis found in Tucson desert

Post image
61 Upvotes

Gifted this pelvis and spine from a friend who owns land on the desert here in Tucson and found these on her property. Really unique pelvis shape and haven't had much luck with Google image search. Any help identifying is greatly appreciated. Wanna gift em to a buddy for Christmas.


r/bonecollecting • • 18h ago

Bone I.D. - N. America Identification Help, Northern New England

Thumbnail
gallery
1 Upvotes

Hello all,
Found in a remote sprucey lowland in N. New England. They look similar to cow but I’m skeptical based on the location I found them in (seems unlikely to have ever been pasture/grazed), hoping someone will say cow moose. Pointers appreciated.
Thanks


r/bonecollecting • • 1d ago

Advice Cleaning horse teeth?

4 Upvotes

I work on a ranch and every now and then the horse dentist comes and I get to take some teeth home. Wolf teeth and incisor caps. (Horse baby teeth essentially)

I need a more efficient way to clean them. I’ve been soaking in peroxide, then water, then peroxide and picking at the meat with my fingernails between soaks. It’s disgusting and time consuming and not always very effective and I don’t like my fingers smelling like horse meat.

Does anybody have a better way to get meat off teeth? I don’t do this often but would appreciate something easier.


r/bonecollecting • • 22h ago

Advice Future dermestid business

1 Upvotes

I’ve been a taxidermist for 4 years now (working for someone else) and am going to open up my own dermestid skull cleaning business. I’m hoping to not only get individual customers but taxidermists as well and also hit the oddities crowd with all my trapper connections.

My question is for others that do dermestid beetles: do you have anything you wish you knew before hand or wish you did differently?

Will be starting in early 2027