I'm a beginner bookbinder and I don't own a plotter yet, so I usually order custom-cut HTV designs from another city.
The problem is that my HTV keeps peeling off. I've tried letting it cool, using the recommended temperature and applying the right amount of pressure, but some parts still don't stick properly, while others peel off completely.
I'm also confused about the quality. My HTV feels almost like foil, whereas I've seen other people's HTV that looks and feels much more premium, with a different finish.
Is this a quality issue, or am I doing something wrong during application? Could it be because of the type of HTV I'm ordering?
Would really appreciate some advice from experienced bookbinders and HTV users!
Some background: I have a reference project that has gone through numerous revisions and reincarnations, most recently as a GitHub web project. While it's convenient to use that way and I can update it at will, the web outages of the past week have me considering making a hard copy.
The last time I made a book, some 20 years ago, I was a long-haired, pimply-faced weeb following the late, great Anthony J. Bryant's guide to fukuro-tōji. It was straightforward enough, but this new endeavor needs to be pocket-size. To that end, I'm aiming for what I call "letter octavo," which is what it sounds like: a standard sheet of copy paper, printed, folded, and cut in octavo, for sixteen 2.75" x 4.5" pages per sheet.
Not wanting my creation to come out hideous or hard to use, I hope you'll be willing to share some of your experience and intuition.
Without further ado, here are my questions:
How many pages per signature are normal for regular 20-lb paper? I'm thinking 32 pages for two sheets per signature, but will that be too thick, or annoying to plan out compared to 16/1-sheet-per-signature?
Assuming 6-point body text, how big should headings be? I assume there's a conventional ratio for what looks good, but I don't know what it is.
I’m deep into hand-binding my own books (using custom book cloth and coated papers like Skivertex), and I'm currently struggling with the age-old dilemma of titling. Traditional brass types and hot-stamping presses are amazing, but for one-off personal editions, the cost and setup are just too prohibitive.
I’m considering a compromise: buying a cutting plotter (like a Silhouette) paired with a heated foil pen (such as the We R Memory Keepers Foil Quill) to apply foil titles directly onto Skivertex.
My main concerns are:
On smooth materials I believe there should be no problems, but what about "grainy" patterns like ubonga? Hot foil quill uses almost no pressure and I'm worried this will not look good on peaks and valleys.
General aesthetics - how does it look? Is the edge sharp? Does it peel off?
The thing is - I'm not interested in debossing as much as I am in just adding a nice looking title. Let's ony focus on the looks of it. I know plotter is more elastic in terms of what I can print, but let's leave that and other concerns. Please take a look at the photos for an example of what I'm looking for (those are old library book).
I’ve looked into traditional copper/brass type sets and presses. Honestly, I wouldn't mind investing more money in them if I knew for a fact that a plotter simply couldn't achieve a clean, decent result. However, my primary material is Skivertex, which lacks the natural thickness and "meatiness" of leather. I’m genuinely worried that the true potential of a metal type setup would be wasted on such a thin, flat substrate anyway, so I might spend a fortune on a pro setup that is overkill for the material.
Please share your experiences with plotters and hot foil quills (and with working with brass types) and Skivertex-like materials. Maybe you did some projects and you can share insights & photos?
Made a book press for my wife. The base and platen are 18mm plywood, crossbar is 2x15mm plywood glued together. Sideposts are M8, main spindle is M16 threaded rods. It has two fold-out legs for using it as a backing/finishing press. Legs are 3d printed (TPU).
It's not perfect, but got very close to my plans so I'm happy. And my wife too :)
A few weeks ago, I visited Korean traditional paper(Hanji) store. I was so curious, I asked many things. At first time, the old man seems that I was just one of tourists but after a few minutes of talks, he became open to me and gave me many advices about Hanji. Also he showed me how traditional book binding is done.
Since that day, I've been learning Korean traditional book binding technique(ochim-anjeong-beop).
I made 2 prototypes(white one and yellow one), all hanji inside and out.
I am still learning, so any thoughts from different cultural view are welcome.
We're a small Italian team passionate about bookbinding and craftsmanship, and we've recently launched our own brand, MIOBUK!
We've developed a patented technology that reveals two different hidden illustrations along the page edges, depending on which direction you fan the pages.
Our notebooks are designed and produced in Italy, combining traditional craftsmanship with innovative finishing techniques.
We'd love to hear your thoughts! What do you think of this technique, and what themes or artwork would you love to see?
We're always open to creative ideas and suggestions! 😊
The smallest piece of blue paper on the bench is also the only one with the grain direction marked. In this bindery puzzle, two people have fifteen minutes to turn the same table over between workshops. Kit is keeping that little scrap for the person who cuts the endpapers tomorrow. Lee has been asked to clear everything smaller than a postage stamp.
“Everything?” he asks.
“Everything loose,” comes the answer from the sink. Kit looks round just as Lee picks up the little desktop vacuum. It still needs two AA batteries under the cover. That buys them a conversation they otherwise would have had over a bin.
Kit lays the blue sliver on the cutting mat and draws a box round it with chalk. Lee sets a square of grey board over it. To somebody walking in tomorrow, the first version looks like part of today's mess. The second looks like a clean piece of board available for use. Neither actually tells the next binder what the scrap is for.
The fix I'm leaning toward is taping one edge of the sample inside the folded work ticket. You can feel the grain and lift it to compare the colour. The drawback is that the ticket normally lives across the room with the press. Where do you keep reference scraps that still have a job on the next shift?
I’m just a beginner but I have this book on my shelf and was thinking of restoring it as a project. I don’t even know where I got it, and it has no sentimental significance to me, so if I wreck it trying, it’s not too bad. But I’d like to know what more experienced binders would start with. And if you know a video to demonstrate it, that would be helpful.
Not sure if this has its own binding name, but I saw a repost of a book on this sub a while back that had coptic binding stitched as text and I wanted to give it a shot! I watched Sea Lemon's video on it, but it was honestly pretty intuitive if you're adept at coptic binding. My second and third Os got a little wonky on me lol. Just gotta make clearer markings for myself and triple check then before punching the holes with my awl.
Oakwood is the name of the cemetery where I took the picture that's printed on the front cover. I did some straight line anchoring stitches on either end just for stability - my spine is 9x~.75" (22.9x1.9 cm), so I didn't want my letters to look too squished, but I also didn't love how much space that left on the end without the straight lines.
I have a book in Chinese for handmade notebooks. I can read it but I don’t know the material names I need to buy here in the U.S. I want to just start simple as it will be my first time to try and want to later on teach some teenagers to make it as well. Watched some videos online as well.
I plan to start it small. I am not great at sewing but can do very basic. Here are my thoughts:
Want a hard cover with fabric. Maybe can glue some paper as decor on the cover.
Just 10 pages or so and a small size to keep it simple.
What type of materials do I need? Where to get it? I have some basic fabric cutter/ scissors, mat, and paper craft cutter, etc.
Not sure if this is the sub for this but I bought this book a few days ago and noticed this glue between the cover and the pages. Is this normal or am I going to have to learn how to do some re-binding lol?
Help! I'm new to binding and repair. I have this paperback (not valuable, not old) with sewn signatures. As you can see in the photo, the original glue strip has completely come away. How should I go about repairing/rebinding this? Thank you!
I am a total beginner, and want to make my partner a journal for Christmas. I've done some research, but my head is spinning a bit from all the jargon and different techniques online - and I don't want to drop £50 on a bunch of kit which then isn't right.
I also can't seem to find lined short-grain book paper anywhere...
So, I was just wondering if anyone had any suggestions for a simple, no-frills beginner technique for an A5 journal.
Recently got a 2nd hand copy of Josee, the Tiger and Fish manga from Yen Press, and it had these minor damages in the back cover. Seems like the actual print was printed first in a plastic film before being glued on the actual cover paper. I was wondering if there was any way to at minimum, reduce the damage. Thanks!
I've watched some DAS videos on 3-piece bradel and got interested to try and do it with a leather spine piece and cloth covers. I have 0.5-0.7mm goat leather that could be really great for this, but i am not sure if there is anything additional that i have to do to incorporate it well into the case- i've never worked with leather in bookbinding before. The width of the cover boards will be narrower to accommodate the additional thickness of the leather compared to cloth so the side overhang is still good. Will the hinge area be flexible enough to open and close properly with the standard 7ish mm gap or do i need to increase the hinge area to something like 10-12mm (or more)? do I have to to thin out the leather in some areas? Any advise on questions below or other things learned after trying anything similar would be greatly appreciated!
This is my first rebind (second project overall) - still have a lot to improve for next time but given my inexperience I'm pleased with how this came out!
This is my friends very loved and battered copy of good omens (pictures at the end of the original cover, where one piece of tape was holding it to the spine). They wanted a cover that didn't have Neil Gaiman's name or face on it, so I made a new hardcover and paper labels with just Pratchett's name.
Improvements for next time - my hinges could have been better, and the card I used for endpapers was from a roll, so they got a bit wrinkled even after trying to wrangle them flat. Given the condition of the text block if I was braver it would have been good to sand and gild the edges, but with it being a sentimental book I didn't want to try it and mess it up, so that's a skill to practice on my own books.
Hours of work led to efficiency improvement. I think I can safely say I am proficient with a library style binding (split board). Next will be repeatedly making laced in boards until I feel proficient while also learning how to marble my own paper!
Any tips for leather? I have several books on how to do it, i have done leather working before (belts, wallets, bags), but no functional experience for book binding leather with several low grade hides on the way.
This book "broke" this morning at work - you can see the mull about one signature away from the end of the book. I know how to fully recase, and also how to repair a hinge, but what's the best way to tighten this situation up without going crazy (either in the mind or in excessive repairs)? Thanks so much!
First pic: Looking down at the text
Second: Perspective on where this is occurring
Third: Middle of the signature that's sort of become detached from the rest of the block
Okay, so this is my church's bible from about 1990, and the spine is cracking and breaking. What can I do to slow the breaking and maybe fix it. They left it open in the middle, flat for an extended period of time, so I'm guessing that's where/when it started to break. I was going to make/buy a cradle for the spine to lay flatter at least, but I have no clue on what else to do to help preserve it.
Hello! So this year I’ve decided to cancel my Microsoft subscription in order to try something new for my typesets. I’d love to hear any recommendations for softwares that you have used to make fun typesets? I’ve heard good things about Adobe Indesign but would love to know of any other suggestions.
Edit: Thank you so much to everyone you responded with your recommendations :) I’m going to try them all out and see which works best for me. Thank you so so much!!
I tried to do some painted edges with acrylic paints. I did a layer of light blue first and then a mustard yellow with a vinyl stencil. It was difficult trying to get the images right up to the edges of the cover. I think next time I am going to try make the stencil wider for an overlap.