r/CarWraps • • Sep 08 '24

**Welcome to r/CarWraps! Please Read This First**

21 Upvotes

To make your experience better and help you get the most out of this subreddit, we’ve created an FAQ. Before posting or commenting, please take a moment to review them.

FAQ Vinyl Wrap Wiki:
Find answers to common questions, tips on car wraps, and more in our FAQ Wiki.

FAQ PPF Wiki: You can find answers to PPF questions and tips on our PPF Wiki .

Subreddit Rules:
Please ensure you’re familiar with the rules of the subreddit to keep the community running smoothly. Posts or comments that break these rules may be removed.

Thanks for being part of the r/CarWraps community! Let’s keep it helpful, friendly, and fun.

Special thanks goes to u/CSOCSO-FL for helping with our wrap wiki page!! Also, additional thanks goes to u/Retrania for managing the PPF Wiki!


r/CarWraps • • 2h ago

Car PPF

3 Upvotes

i’m thinking about getting a coloured ppf for my white car, but i’m worried it might get damaged over time, especially after with summer’s heat as i live in a really hot climate.

i found a good shop, so i’m not too concerned about the installation itself. my main concern is protecting the car’s original paint and accessories.

for those who have experience with coloured ppf, can it be safely removed after a few years? if it starts deteriorating, peeling or melting due to heat or whatever, could it damage the original paint? and is there any risk of it affecting the car’s original colour or exterior accessories?

basically, i want to be able to remove it whenever i want without any damage or permanent changes to the car. would you recommend going for it?


r/CarWraps • • 2h ago

Installation Question DIY PPF

Thumbnail
1 Upvotes

r/CarWraps • • 15h ago

Installation Question Help with a custom decal.

Post image
3 Upvotes

Hi!

I've been asked to make a custom hood power dome decal.

Now i measured all i could, but im not really experienced in vinyl wrapping and the best ways to do it + it's not a simple square...

See the example the client wants but they also want the raised edge done. Does anyone have the dimensions of the top like the example decal + the full size with the raised edge?

Any help would be super appreciated.


r/CarWraps • • 10h ago

Installation Question How realistic is this video?

Thumbnail
youtu.be
1 Upvotes

Exactly as the title says. The company I work for has done a few Polaris Rangers with plastic panels and they're always a nightmare. The vinyl never wants to stick, even with primer. We use 3M 2080 wrap vinyl or 3MIJ180 print vinyl. I'm wondering if there is anything we're doing wrong or if these videos aren't telling the whole story.


r/CarWraps • • 19h ago

Installation Question What should be the reasonable budget for xpel xr plus tint

Thumbnail
1 Upvotes

r/CarWraps • • 21h ago

Help finding a color PPF closest to Tesla's ultra red

1 Upvotes

I have 23 white Telsa Model X that I want to install a color PPF on. I love Tesla's ultra red on their latest cars and would love that as a PPF. I've searched online extensively and can't find a good definitive answer. The closest ones I've found are Pure PPF's Metallic Redhood and TWraps' Liquid Metallic Cherry.

What are some of your recommendations?


r/CarWraps • • 1d ago

What is this?

Post image
52 Upvotes

Anyone know this exact wrap?


r/CarWraps • • 1d ago

Black wrap is peeling back a little, revealing red underneath. Any DIY ways I can fix this?

Post image
2 Upvotes

r/CarWraps • • 1d ago

MOTIV WRAPS IN NORTH LAKES ABN: 72 665 638 665

Thumbnail
1 Upvotes

r/CarWraps • • 1d ago

Help with PPF

1 Upvotes

I’m looking to do ppf on my car and would like some help choosing. I don’t have a big budget and only need to do front ppf, what are good quality ppf options that are not as big budget needed like the top 3 brands.


r/CarWraps • • 2d ago

Free vehicle wrap templates (9k+) - useful or not?

Thumbnail
0 Upvotes

r/CarWraps • • 2d ago

Installation Question What would you do?

Post image
1 Upvotes

Wrapping saddle bags for a 2020 Road glide how would you attempt wrapping? These covers with complex curves? Would you do it in one piece or multiple?


r/CarWraps • • 2d ago

Installation Question Substrate Stick

3 Upvotes

Hello fellow car enthusiasts, I have a project that I want to wrap. My question is, can wrap stick to anything? Can it stick to primer? Does it need anything special?
The reason I ask is, the loser that did the bodywork on my car left things incomplete that should have been finished so now I’m going to wrap it myself because I can’t afford to redo everything.
I would REALLY Appreciate any input you have.
E


r/CarWraps • • 3d ago

Material Question Would you rather 15% or 20% tint?

Thumbnail
1 Upvotes

r/CarWraps • • 4d ago

Installation Question Inlay recommendations?

Post image
8 Upvotes

Can’t decide the best inlay placement here. I feel it’ll be ugly and extremely noticeable any way I go. I don’t want to risk trying it in one piece. Any recommendations?


r/CarWraps • • 3d ago

Kia Seltos HTK(O) + Matte PPF vs X-Line (Graphite Matte) + Partial PPF – Which makes more sense?

Thumbnail
1 Upvotes

r/CarWraps • • 4d ago

Seeking Automotive Vinyl Print & Cut Partner — Recurring, Print-Ready Production Orders

0 Upvotes

I’m looking to establish an ongoing manufacturing relationship with a print shop or production partner capable of producing custom-sized automotive vinyl graphics for exterior vehicle panels.

We would handle customer acquisition, artwork, design, measurements, and order processing. Our manufacturing partner would receive complete, production-ready files and handle printing, lamination, precision cutting, packaging, and ideally direct-to-customer shipping.

The goal is to make the production process as streamlined as possible. Ideally, each incoming order would require minimal preparation beyond loading the supplied files, printing, cutting, and shipping.

Production requirements:

Dimensions: Generally 5–7 feet wide and approximately 2–4 feet high, depending on the application. Some larger sizes may be required.
Material: Premium conformable cast automotive vinyl, such as 3M IJ180mC, Avery Dennison MPI 1105, or a comparable product suitable for curved exterior automotive surfaces.

Printing: High-resolution, full-color printing with consistent color reproduction.

Finish: Gloss protective laminate initially, with matte options preferred.

Precision cutting: Digital contour cutting, including irregular perimeter shapes, internal openings, and strategically positioned relief cuts based on supplied vector cutting paths.

Order structure: Recurring, individually customized orders as customer purchases come in. Artwork, dimensions, and cutting patterns may vary between orders.
Artwork: Complete, production-ready files supplied by us. No design or artwork development required.

Packaging: Protective packaging with a supplied installation instruction sheet.

Fulfillment: Ideally, direct-to-customer shipping within the United States, with neutral or white-label packaging.

I’m particularly interested in understanding:

Approximate production costs for a 72 × 36-inch or 84 × 48-inch graphic, including printing, lamination, and precision cutting.
Whether your equipment can handle complex contour cutting, internal openings, and relief cuts directly from supplied digital files.
Preferred production file formats and specifications to make the process as close to print-ready as possible.

Ability to accommodate recurring individual orders without significant setup charges.

Typical production turnaround times and direct-shipping capabilities.

We’re open to manufacturing partners anywhere in the world, provided quality, pricing, and fulfillment logistics make sense.

For interested manufacturers, I can provide a separate, more detailed production specification and request for quotation (RFQ) outlining the materials, sample dimensions, cutting requirements, packaging, and pricing information we’re looking to evaluate.

I’m especially interested in connecting with shop owners or manufacturers who have the equipment and capacity for an ongoing production relationship.

If this sounds like something your shop could accommodate, please feel free to reply or message me directly.


r/CarWraps • • 5d ago

Installation Question Zx-6r gas tank POA

Thumbnail
gallery
4 Upvotes

If anyone has done this tank before would love some tips or thoughts on how to tackle it. I got it done but done love it This weird shapes are tough 😤😂 it’s a 2013


r/CarWraps • • 5d ago

Where to find this color?

Post image
25 Upvotes

I created this color in AI and can’t find a matching wrap color for my AMG C43. I currently have it in black but prefer this style more. Can anyone help what wrap would match?


r/CarWraps • • 5d ago

SATIN PPF ON A MOTORCYCLE - advice on coatings, prep, and waterless cleaning

Post image
1 Upvotes

r/CarWraps • • 5d ago

Installation Question Matt White Wrap

Thumbnail
1 Upvotes

Has anyone got matt white wrap done on their car?

Thinking of getting it done but worried about permanent dirt marks.

Need opinions.


r/CarWraps • • 4d ago

I want to build a shared workspace for wrap shops and clients to explore wrap ideas with AI. Looking for feedback.

Thumbnail
gallery
0 Upvotes

Hi everyone, I’m Yang. I run WrapStudioAI, which helps people explore wrap ideas with AI before visiting a wrap shop.

By early November 2026, we’d had 14,000+ signups, 300+ paying customers and nearly 4,000 users trying multiple concepts. To me, that suggests there’s interest in exploring ideas before committing to a wrap, and that some people are willing to pay for that exploration.

I am considering to extend the current Studio into a shared space for wrap shops and their clients, with the shop’s name, logo and contact details visible throughout.

Your shop would have a prepaid credit pool, and you could choose how many credits to assign to each client. You could then invite them with a link or QR code to explore ideas with the AI. You’d be able to see what they asked for, the designs they tried and the changes they made, all in one place.

You and the client could message each other there. If you wanted to take a more active role, you could upload your own work, create another concept or refine an existing idea for them. The client would see those updates in the same workspace.

What interests me is whether having the ideas and conversation together would make the early design process easier for a shop. It could give you a mockup or raster reference to discuss, with your designer still preparing the final layout and production files.

It might also help you identify clients who have a specific project in mind and are ready to take the next step, so you can prioritise follow-ups.

I haven’t built this shop version yet. These two images are concept mockups, and I’m looking for feedback before putting more time into it.

For the experienced wrappers here, would something like this interest you, and do you see it being useful for your shop?


r/CarWraps • • 5d ago

Cherry - What do you think?

4 Upvotes

(Sorry for the AI - I'm using it to visualize design only)

My town is really famous for Cherries, and the last name "Cherry" has been in my family for a few hundred years (ended 2 generations ago) - Fittingly Cherry color and that will be it's name.

a penny for your thoughts?

Front
Rear

r/CarWraps • • 6d ago

Wrapping my Miata over the winter questions.

4 Upvotes

The 2026 Model Year Miata has a blue that basically looks black unless it hits a good angle of sunlight. I prefer blue cars but I want to try something different. I will be wrapping it orange over the winter with possibly a Satin Black stripe or 2 down the center. I do have a bit of experience wrapping, I wrapped by Veloster N about 4 years ago. I'm a patient person and my Miata will just chill in the garage all winter while I slowly work on it.

I have a few questions about wrapping in the colder months. I will have it in my Garage and will be sealing up the Garage to prevent heat from leaving, is there a recommended temperature to keep the garage at while doing the work? Will about 75 degrees be ok? I assume since I can't really put it in the sun to let the glue adhere, is post heating really important on the edges and the entire wrap itself? If it's sunny outside but still cold, can I possibly put it outside and let the sun heat it up a bit or will the colder temps still cause possible issues?

On the ND Miata, the front bumper requires doing inlays in a couple sections. Do most people do inlays with the knifetape with the dual filament or with the inlay, do you want to overlap it a bit? I'll have to do research on this and I will probably do bumpers last.

For the center stripe(s), are these inlays or can I just run the stripes over the already wrapped hood? What methods can I use to prevent the edges from coming up on the stripes while washing which I hand wash anyways and will be careful.

Last time I did the wrap, I used Avery Dennison and it was really forgiving and easy vinyl to work with. I will probably stick with that brand for this one, are they still a good manufacturer of vinyl's?

Thanks!