r/computerrepair • • 15h ago

Hardware Issue Charger works by applying pressure up/down/forward, but not by just pushing contact inwards. Measured 19.5 V in charger contact. What can I try on computer side to make contact?

Thumbnail
gallery
1 Upvotes

Battery is wasted, but I would like to make it possible to use the laptop with only charger, but right now it loses power when not pushing on the plug.

I tried bending the cable itself, doesn’t seem to matter. Also measured the contact, so I think the charger side is fine, and that there is a problem on the laptop side.

How to troubleshoot or fix that? I’ll resolder if needed.


r/computerrepair • • 3h ago

Diagnostic Help stepped on my laptop and this wont go off the screen. will my laptop be ok or is this gonna get worse?

Post image
3 Upvotes

r/computerrepair • • 9h ago

Hardware Issue what does this sound mean? this pc wont explode and its giving me hope

2 Upvotes

its near the cpu area.

i have 2 missing cpu pins but it was working for as long as i can remember, i havent identified what the cpu pin does because i dont know how to locate it on the schematics

i switched ram and now my pc turns off and restart after a while after booting into windows, even in bios it happens so i feel like my mobo is toast and unstable, i also had a super loud coil whine (deafening) around the cpu area too

Troubleshooting that i did: i tried cleaning the whole mobo with alcohol. I cant remember how many times i disassembled this pc which i think made the problem worse because there was a time that there was a static on the metal case and had to disassemble everything again

the sad part is that, it works for like 2 weeks without crashing and then the crashing returns then i disassemble it then it works for 1 week then crashes again, its been like that for 2 months now.

right now im planning on replacing the mobo or psu but im leaning towards the mobo


r/computerrepair • • 14h ago

Broken Battery Holder on a Thinkcentre 920q

Thumbnail
gallery
2 Upvotes

Hi. I broke the batter holder off of the motherboard when trying to replace it. This is a Lenovo Thinkcentre 920q. There are so many different types of battery holders when I Google for it and I can't find one that looks exactly like it. Since this ulis a mini pc, it has to be slim under the fan.

I'm not proficient at soldering, but have completed very minor repairs on easy joints a few times. These two connections seem large and relatively easy. Any help tracking correct part and any tips for this one would be appreciated. I assume that I don't have to pull the board since this will probably solder right from the top and not pins through the board.