r/dmtguide • u/AppalachianDMT • 3h ago
Extraction Question/Discussion Hump Day Grind!!
I love making the carts. It’s a long tedious process. When I fill the carts it makes it all worth while. It’s like crossing the finish line!
r/dmtguide • u/DMTryptamines • Dec 17 '20
Special thanks to u/ClobWobbler for their assistance! be sure to check out r/DimitrisGarden too!
Last Edits: March 13, 2021
So you want to extract DMT eh?
You've heard the whispers of hyperspace and wish to join the entities. You dream of basking in their unlimited love and unlocking the mysteries of the universe. The potential of traversing the void between realms to reveal the intricacies of the connection between body and soul is far too grand to ignore any longer.
You can get there. We can help.
Some general terms to start us off:
People often say DMT extraction is like baking a cake. While this is true to a degree as you are following a set of instructions and mixing ingredients together it also doesn't quite capture the potential for danger that is lurking about. Please note that although this may all sound very dangerous, anybody with a sound mind who is willing to take their time with the necessary precautions will be 100% fine.
All ingredients should be pure or at least of a reasonable purity (e.g 99% lye) and you should be checking the SDS (formally MSDS) to see what they truly contain but you should always read the label for clues either way. As an example Coleman fuel doesn't list their added rust inhibitors in the SDS but it does say on the label, evap tests done on Coleman leave residue and have turned extracts different colours. When buying a new brand or can/bottle of solvent an evap test should be done on a cleaned piece of glass that was then wiped down with alcohol to test for residue.
Along with choosing the right PPE to protect your person you also need to pay mind when picking the materials for your extraction equipment and the area you are in.
Some PPE to consider:
Considerations for your extraction space:
Extraction Equipment Materials:
Your extraction equipment should use suitable materials for your substances. Lye reacts violently with certain metals like aluminum to produce hydrogen gas while naphtha can dissolve and degrade certain plastics and rubber. You need to choose the right material and right type of vessel for your extraction.
Common Extraction Equipment:
Here's a few common pieces of glassware and equipment used by many novice and experienced extractors.
All good things must come to an end and this is one of them. I've been working on this throughout the week so I think it's time to publish it and let you guys have at it because I'm tired of staring at it and honestly I'll never stop adding things unless I just do it! Please inform me of any typos, mistakes or incorrect information in the comments, RAKE ME THROUGH THE FUCKING COALS. Open to any improvements or suggestions as well, easy to miss stuff when making something this big! I have meetings through most of the day so may not be the most responsive!
r/dmtguide • u/AppalachianDMT • 3h ago
I love making the carts. It’s a long tedious process. When I fill the carts it makes it all worth while. It’s like crossing the finish line!
r/dmtguide • u/Eaglesfan05 • 4h ago
I wanted clarification on this if someone could help me out. I couldn’t find a definitive answer online and would prefer to ask people who have experience.
I am following the noman tek. So I let the two layers separate before agitating again 3 more times (4 per collection jar). Agitation 1 minute or so, let settle, repeat until I’ve done it 4 times. Separate the two layers and repeat the whole process for each new collection jar.
My question is when, and if, do I vent the lid? Obviously when separating the layers the lid needs to be off. But should I be popping the lid off for a quick second after each agitation? Is the pressure build up enough of a concern? 4 agitations per collection jar. 1 minute rolling, 3-5 minutes to separate. So around 16-20 minutes for each collection jar until it’s ready to separate. If someone could confirm when venting is needed through this process, I would appreciate it. And just since I’m here, should the lid be as tight as possible when on?
r/dmtguide • u/Shboo42O • 5h ago
I've been trying out some different things to make the whole extraction process a bit simpler and quicker. I've been doing STB with MHRB and was getting tired of the amount of pulls I had to do and how many flasks I would have to go through in order to clear out 1kg of bark since the 1L erlenmeyer flasks max out at 100g of MHRB and the 2L about 200g but usually I would only run the 1L with 75g and the 2L with 150g as going with the max seemed to cause me alot of emulsions and took a stupid long time to separate after mixing.
So I ordered some whole chips of MHRB and I used 500g of bark then did a standard A/B 3x acid boils with citric acid and distilled water then reduced the combined liquid to around 700-800ml then added that to a 2L flask then added 30g of salt with 250ml water and 100g of sodium hydroxide with 250ml of water both mixed in separate containers then added to the soup which gave me roughly 1.3L total volume in a 2L flask.
Usually I would fill the flask up a bit with distilled water to make it easier to pull the solvent since it's closer to the top instead I just filled the flask with my nps using about 600ml of solvent then mixed for 5 minutes. I figure if I use more sbent it will mean less pulls overall. So instead of using my pipette I cut a piece of 6mm PTFE tubing that I had and used it as a syphon to pull out the nps. I just cut the tube roughly 400mm long, had my flask sit up on top of a box and my graduated cylinder just at table height. Since I was doing a water wash anyway I primed the tube with distilled water which is just putting the tube into a container of water then holding my thumb over one end of the tube. Then put the tube without my thumb on it into my flask making sure reasonably close to the soup layer but not too close that pulls the soup with it, then put the end of the tube with my thumb on it into my graduated cylinder and removing my thumb which starts the syphon. It worked perfectly and was so much easier than slowly pipetteing it out 10ml at a time. I freeze precipitated that and did 2 more pus with the same amount of nps.
I ended up getting about 80%of the deems out in the first pull then got the remainder in the 2nd pull and there was almost nothing left in the 3rd pull. So extracted 500g of bark with only 2 pulls instead of doing 5 pulls per flask for however many flasks needed to process 500g of bark. I personally found this method way quicker and easier than any other method I've tried so thought it might help someone else also
r/dmtguide • u/Brady-myers16 • 14h ago
Hello! Planning on my first extractions and I’d love some help with some questions from anyone who’s more experienced in this (don’t want to ask some of them outside of my DMs)
Thank you!!!
r/dmtguide • u/Gullible_Plant7015 • 17h ago
Sorry this isn't about dmt but its about extraction please dont remove this i cant find anywhere else to ask about this without it immediately being removed im doing a organic extraction of something thats not dmt but is also crystaline in its end product and I was wondering if anyone could tell me how safley ethyl acetate acetone and methanol evaporate from organic crystaline products if you evaporate them only using 100f and airflow ovemright and if it would be safe to consume or if it leaves a dangerous amount of trace solvents
r/dmtguide • u/xdVic • 19h ago
Please help, thanks
r/dmtguide • u/Historical_Turnip751 • 22h ago
I used ChatGPT to help me write this post.
TL;DR: I accidentally used alkaline Smartwater containing added electrolytes instead of distilled water to dissolve sodium hydroxide (lye) during a DMT extraction. The mixture behaved differently than usual, and I’m wondering whether the electrolytes could explain it or if there’s a potential safety concern.
It’s been a couple of months since my last extraction. I recently rolled the dice on a new root bark supplier and got burned for $300. Dad always said, “If it ain’t broke, don’t fix it.” Lesson learned!
My partner and I spent a couple of years refining our technique. She handled the research, sourcing, and funding. I handled the hands-on experimentation. I’m comfortable with our process, but I’m no chemist, and my terminology isn’t always perfect.
Here’s what happened:
I had my acidic plant solution ready and was preparing to raise the pH using sodium hydroxide.
Normally, I dissolve the NaOH in distilled water first. Unfortunately, I’d used up all my distilled water making the acidic solution.
In a hurry, I grabbed a nearly empty bottle of alkaline Smartwater. There were only a couple of swallows left, but it was enough to dissolve the lye.
Everything appeared to dissolve normally.
However, when I added it to my acidic solution, the appearance was noticeably different.
Normally, the mixture turns extremely cloudy before eventually becoming nearly pitch-black, almost like Guinness stout.
This time, it turned a strange, murky brown instead.
I put it on my magnetic stirrer at moderate speed. The appearance gradually started changing, and my latest pH reading was approximately 10.5.
Then I remembered something:
Smartwater has added electrolytes!
I know electrolytes involve dissolved ions, often from mineral salts, but I’m unclear about how those particular additives might interact with sodium hydroxide or other components of the mixture.
So here are my questions:
Could the added electrolytes account for the unexpected color or cloudiness?
Are there any chemical interactions between those minerals and NaOH that would create additional safety concerns?
Is the unusual appearance itself a warning sign, or is there simply not enough information to determine that?
I’m not looking to post my entire extraction technique or have someone rewrite my process. I’m specifically interested in understanding this unexpected behavior and any potential safety implications.
If more information is genuinely necessary, I’m happy to clarify.
I’m heading out to pick up more distilled water and will check back for responses.
Thanks in advance for any chemistry knowledge you can share!
And yes, I’ve learned my lesson about improvising with unfamiliar ingredients. 😂
r/dmtguide • u/Due-Psychology3576 • 1d ago
I’ve been looking at multiple guides on how to smoke dmt and I only really have easy access to a regular weed pipe at the moment. What’s the best way to smoke it for cheap without having to spend another 100 dollars on a bong or smth.
I’ve acquired 1/4g of NN DMT and have tested it to be safe I j do t want to waste it for a non breakthrough trip.
r/dmtguide • u/Plus_Support_6688 • 1d ago
vape illegal in China. can't buy
r/dmtguide • u/Plus_Support_6688 • 1d ago
i trying to extract some
r/dmtguide • u/AmberMonarch • 2d ago
I'm a hobby chemist with no education, researching DMT crystallization. The crystals won a purity contest in Denver recently, 99.9% pure. I'd appreciate any feedback or suggestions on my process, thanks. My dream is to get a characterization and model of the lattice if anyone knows a guy.
r/dmtguide • u/p80king • 1d ago
Hey any tips for what I would need for a Cybs tek extraction I've been wanting to do it for years just never had the courage to and been trying move from mechanical to chemical but I want to go for the basics and most cost effective to see if it's the switch I wanna make without being to much of dent if it's not any help is appreciated
r/dmtguide • u/WYTE12 • 1d ago
I made my own DMT for the first time. However my experience wasn’t the best. I was extremely nauseous and felt sick right when it hit. I don’t know if this is normal. I’m thinking it’s either because of the impurity, or it fucked up the process somehow. I got a reconnection to add a flavor the cart ( I use a cart where u just remove the top add whatever substance and press the botton to heat). I’ll try that just wanted to hear what you guys think. I did numb my lips as well I must have gotten a chemical burn or some shit. Lmk what u guys think. Thanks.
r/dmtguide • u/mujtabanochill • 3d ago
I made a half gram cartridge about 1:1 pg ratio last week. The cart is on its last quarter but the cartridge has gotten substantially weaker, like I’m talking probably half its potency.
I started off having the voltage run at like 3.4 and I went down to between 2.4-2.8
I just don’t understand what I would’ve done that made it get so much weaker, I want to identity some possible causes before I make another one.
r/dmtguide • u/Mobile_Scallion_9355 • 2d ago
Where’s everyone getting their bark at safely?
r/dmtguide • u/New_Isopod_1625 • 4d ago
Voici deux extractions du même sachet de MHRB . Le plus sombre a été fait il y’a trois mois avec une tech STB sans chauffer la soupe et le solvant. Rendement 0.5 % après trois tirages.
Le plus clair fait cette semaine en ATB, en ayant chauffé la soupe et le solvant avant extraction. Rendement 0.9% avec 3 tirages.
Mais les deux ont des couleurs différentes…Qu’en dites vous? Je n’ai pas lavé l’extraction mais j’ai fait super attention dans les deux cas à ne pas attraper la soupe lors de l’extraction.
Merci de vos avis sur cette couleur différente .
James
r/dmtguide • u/Still_Monk50 • 3d ago
I'm considering buying a 3L one if it speeds up the acid cooking time.
Any details on how to pressure cook root bark would be great. 🙏🏻
r/dmtguide • u/Voodoo700 • 4d ago
Under “Pull” it says to add a minimal amount of warm/hot NPS. Any suggestions for what a minimal amount might be? Thanks!
r/dmtguide • u/Cold_Acanthaceae_913 • 4d ago
I’m trying to find a ratio but can’t find it anywhere. Per gram.
r/dmtguide • u/AppalachianDMT • 5d ago
I really enjoy the process. I use an A/B. First I freeze/thaw a few times and then I pressure cook the bark for 1.5 hours and do an extraction on that juice. Simultaneously I’ll add more water/vinegar and cook it again. Interesting how it gave me two different colors of DMT. This was my first time trying out the pressure cooker method.
Now I will convert this into carts and hopefully break through!
r/dmtguide • u/Jakub-Martinec • 4d ago
I bought some dmt vape on DW. It should be 1:1 but it seems too weak. I usually make my own and vape it with mod with kylin mini 2 but now I don’t have that option. Body load is strong, but barely any visuals. I use battery with 2.7 V. It is capable of doing 3.4 V. Do you think it is a good idea to go for max or will I just burn it? I don’t have much so I don’t want to waste it.
r/dmtguide • u/Gangiewarrior • 4d ago
So ANYONE else ever notice that the Deem Glows Vibrant under A Black light? So I realized that I can Check The Concentration in My solutions with A light., Tbe More concentrated the More She Glows.. ,Kinda cool., ANYONE else ever noticed such?
r/dmtguide • u/CruderBasket • 4d ago
I was just curious if anybody's tried using a Vagnus nerve stimulator while using DMT. Thought it could potentially ease the entry and also help with memory after the experience