r/drywall • • 14h ago

"Dust control" drywall compound

Post image
3 Upvotes

Hi guys. Does anyone have any thoughts on how good/bad the CGC "dust control drywall compound" is for small patch projects? I have a respiratory problem and even though I wear a p90 respirator and try to sand in still air, normal mud still fills the air with dust so I thought this might be a partial solution. Thoughts?

EDIT to say thanks to u/stan_da_man for suggesting the "Hyde Tools 09165 Dust-Free Drywall Vacuum Hand Sander" - that will be a game changer for me. I already have a good vac with HEPA filter and I'm so going to buy this! THANK YOU!
Also: I'm NOT a drywaller but I think my work is pretty decent - so says a semi-pro friend. I typically only do small jobs; biggest I did was a 32' x 6' wall. I'm NOT fast! Based on what many have said I'm going to try this compound out for patches and the like WITH the vacuum sander. Thanks guys, you rock.


r/drywall • • 19h ago

drywall repair

Post image
0 Upvotes

call paz drywall corp free estemate


r/drywall • • 22h ago

Is this okay?

Thumbnail gallery
4 Upvotes

Doing drywall for the first time. For some reason this one bottom piece does not want to go in to the gap we made in the existing wall, so we have a gap. The top piece is fine!

I thought I could spray foam or use some 10 min mud to fill it, but I am not sure if that’s a good plan.

I really don’t want to have to start over, but I guess I will if that’s the advice I get here


r/drywall • • 18h ago

Can I fix this with joint compound + caulk?

Post image
1 Upvotes

This was already how the kitchen window in my apartment was when I moved in (pic is a top-down view of the window sill). There was a security gate here earlier which was removed. How do I fix this? I was thinking I could put some caulk to seal the gap in the edges and then some joint compound all over the base and side walls before painting. But is that durable? Not sure how else to fix this. Help appreciated!


r/drywall • • 8h ago

Apartment mistake please help

Thumbnail gallery
0 Upvotes

So me trying to hang stuff up went horribly wrong. Is there a way I can fix this or am I screwed?


r/drywall • • 18h ago

Which one of you did this?

Thumbnail gallery
2 Upvotes

Alright, who was it?


r/drywall • • 12h ago

Drywall orientation

Post image
3 Upvotes

I’ve done plenty of drywall in my house but I am unsure of the best practice for this situation.

Can I put a single sheet cut to width vertically so it’s just the corner and ceiling joints or is it best to hang them and have a horizontal joint halfway up?

Of note: the laundry chute will be deleted because it comes down on top of our hot water heater so it’s obsolete.


r/drywall • • 11h ago

First time drywall/mudding

Thumbnail gallery
117 Upvotes

Watched a bunch of videos but still feel like I might be screwing up. Now looking for validation from strangers 😂. I’m about to start my 3rd coat…. How am I doing 😬😬😬


r/drywall • • 18h ago

Mimicking texture

Thumbnail gallery
3 Upvotes

Looking for advice mimicking this texture. House is from the 1950s


r/drywall • • 14h ago

How do you reach tight spaces with your knife?

Thumbnail gallery
10 Upvotes

Working on some drywall repairs after a whole-home replumb and these two areas seem daunting. The bathtub ain't going anywhere, and the water softener would require cutting copper pipe to move out of the way...


r/drywall • • 7h ago

Bullnose corner repair help

Post image
5 Upvotes

Hey guys, I recently had a water leak and am in the process of replacing drywall and baseboards. I’m pretty good at flat walls and inside and outside corners but have never done a bullnose. My question is should I cut a piece just big enough to corner the new drywall or should I cut more of the corner out and do a longer piece so it blends? I have a feeling if I just butt the new bullnose corner up with the old one it’s going to look really noticeable and dogshit. Also, it looks like the og installers caked about a 1/4” of mud on this pillar section or whatever you would call it. Should I still pre fill then tape next as usual or should I do multiple pre fills before taping to make sure it blends properly? There’s definitely going to need to be some cakeage to make it smooth I just don’t know if the tape should be under or over it. Right now I’m thinking all purpose for the pre fill, tape on my second pass, and build up coats of lightweight mud until it’s smooth? Thanks in advance. I’m an electrician by trade so I only ever have to do this on my own house.