r/eGPU • • 7h ago

eGPU Manager: plug-and-play eGPU for SteamOS handhelds (free Decky plugin + desktop app)

Thumbnail
gallery
22 Upvotes

Using an eGPU on a SteamOS handheld always meant fiddling: Game Mode stays on the iGPU, shaders re-process every time you switch, the handheld screen stays lit black, and pulling the cable can freeze the driver until a reboot.

So I built eGPU Manager, a free, open-source Decky plugin + Desktop app:

- Auto switch: plug the eGPU in → Game Mode restarts on it, on your TV/monitor. Unplug → back on the handheld. (Or turn auto off and use a Switch button.)
- Shaders per GPU: each GPU keeps its own shader cache, so switching doesn't trigger "Processing Vulkan shaders" again. A Shaders page shows every game's size per GPU, and you can delete per GPU.
- Handheld screen turns off while you play on the eGPU.
- Disconnect safely button: releases the card first, so unplugging never freezes amdgpu.
- Smooth Desktop Mode: KDE renders on the eGPU too (no frames copied over USB4).
- Status + Check setup: dock chip, USB4 speed, PCIe link, monitor, and fixes it can apply (like approving the dock).
- One-click install, one-click uninstall. Everything lives in your home folder, so it survives SteamOS updates and never touches the system partition. Uninstall restores stock.

Tested on: Legion Go S (Z1 Extreme) · SteamOS 3.9.5 · RX 9060 XT · AOOSTAR AG02 (USB4 40 Gb/s).
That's the only setup I've tested so far. If you try it on other hardware (Steam Deck, ROG Ally, other docks or cards), there's an "It works: share my hardware" button in the plugin. It pre-fills a GitHub report (no serials) so I can add your setup to the compatibility list. "Report a problem" does the same, with a log.

AMD cards only (NVIDIA isn't supported on SteamOS).

GitHub + download: https://github.com/avishai0258/steamos-egpu-manager

Feedback welcome! If it helps you, you can buy me a coffee: https://www.buymeacoffee.com/Avishai0258


r/eGPU • • 58m ago

Unlocked Two NVIDIA Ampere GPUs in Windows 11 — and Measured Up to an 81% Increase in Tensor Core Throughput

5 Upvotes

A real-world experiment involving NVIDIA GPUs, UEFI firmware, Linux, Windows USB4, Thunderbolt, CUDA, and AI performance benchmarking.

After extensive troubleshooting, testing, failed attempts, and multiple system reboots, I successfully reached a major milestone with my personal AI workstation.

I now have two NVIDIA GPUs reporting UNLOCKED in Windows 11:

  • NVIDIA RTX 3090 Ti — 24 GB VRAM
  • NVIDIA RTX 3080 Ti Laptop GPU — 16 GB VRAM

Even better, the external RTX 3090 Ti is connected through my Dell WD22TB4 Thunderbolt 4 dock, and its measured AI matrix-computation performance is essentially unchanged compared with a direct Thunderbolt connection.

The external GPU demonstrated approximately 77% higher FP16/BF16 throughput and 81% higher TF32 throughput compared with an earlier locked-state benchmark.

Here is how we accomplished it.

1. The hardware configuration

My experimental AI workstation consists of:

  • Windows 11 laptop with an internal RTX 3080 Ti Laptop GPU (16 GB)
  • External RTX 3090 Ti (24 GB)
  • Sonnet Breakaway Box 850 T5 eGPU enclosure
  • Dell WD22TB4 Thunderbolt 4 dock
  • Thunderbolt connectivity between the laptop, dock and external GPU
  • NVIDIA Windows driver 617.42
  • PyTorch 2.10.0 with CUDA 13.0

My objective was to investigate whether the Ampere GPUs' protected performance-related feature registers could be unlocked, whether that state could survive the operating-system boot process, and whether any measurable AI-compute improvement would result.

2. The original problem: Windows kept resetting the unlock

We worked with the open-source nv-uefi-unlocker project, using its UEFI-based unlocking approach.

The unlocker could successfully establish the requested register values before the operating system started.

However, Windows repeatedly cleared those values during startup.

The typical sequence was:

UEFI unlock succeeds → Windows starts → GPU resets or is reinitialized → unlock disappears.

Using the project's register diagnostic tool, we confirmed that the GPUs were returning to their locked states after Windows booted.

This was a critical distinction: seeing an EFI unlock success message did not prove that the GPUs remained unlocked after NVIDIA drivers loaded.

3. We moved the investigation into Linux

To isolate the problem, we built a bootable Linux testing environment using SystemRescue 13.03.

We tested the GPUs with NVIDIA's proprietary Linux driver, version 595.112.07, while adjusting the initialization environment for our experiments.

Eventually, we successfully loaded both GPUs under Linux and executed CUDA calculations on each.

The external RTX 3090 Ti also retained the expected feature-register values after the Linux driver loaded.

That was an important breakthrough.

It demonstrated that the unlock could survive at least one operating-system and driver initialization path.

The internal RTX 3080 Ti's post-driver register readout was inconclusive in that particular Linux test, so we did not count it as independently verified there.

This helped narrow our attention to the Windows boot and USB4 initialization process.

4. Investigating Windows USB4 and Thunderbolt

Our main suspected obstacle became the Windows USB4 device-router initialization path.

We investigated Windows services including:

Usb4HostRouter

Usb4DeviceRouter

Both normally used the startup configuration:

Start = 3

The unlocker's documentation described a possible Windows USB4 workaround involving temporarily disabling the device-router service during boot.

But this was not risk-free.

An earlier attempt had produced a Code 12 resource-allocation problem, so we did not treat the workaround as universally safe.

We instead developed a controlled, reversible experiment.

The temporary test configuration was:

Usb4HostRouter = 3

Usb4DeviceRouter = 4

We preserved the original settings, backed up the configuration, and prepared an administrator-level rollback to restore the device-router startup value to 3.

This gave us a way to investigate the Windows initialization issue without leaving the machine permanently configured with the device router disabled.

5. Creating the EFI-to-Windows boot sequence

We configured the bootable Lexar USB device containing the unlocker so it could chainload Windows Boot Manager after completing the GPU register operation.

Our test sequence became:

Dell F12 boot menu → PENDRO/NVUNLOCK USB → initiate EFI unlock → Windows Boot Manager → Windows 11

The EFI logs confirmed that both GPUs reached the Windows handoff with the expected register values and intact diagnostic markers.

The important register values included:

FEAT_PLM = 0xFFFFFFFF

SS0 = 0x88888888

SS1 = 0x00000008

We also checked diagnostic reset canaries to detect whether a later reset had cleared the unlock state.

On the successful Windows trial, both GPUs reported:

VERDICT [ampere]: UNLOCKED

The reset canaries remained intact.

For the first time in our tests, both GPUs were independently verified as unlocked inside a running Windows 11 session.

6. Measuring the actual performance improvement

We compared previous locked-state measurements against the unlocked system using the same benchmark implementation.

Testing conditions included:

  • 8,192 × 8,192 matrix multiplication
  • FP16, BF16, TF32 and FP32
  • PyTorch 2.10.0 + CUDA 13.0
  • Twelve timed samples per precision
  • Separate GPU testing and thermal monitoring
  • Multiple repeat tests in the unlocked state

RTX 3090 Ti — before vs. unlocked

PrecisionBeforeUnlocked via dockChange
FP1679.91141.39 TFLOPS+76.9%
BF1682.20144.90 TFLOPS+76.3%
TF3241.2274.80 TFLOPS+81.5%
FP3228.9329.43 TFLOPS+1.7%

The most significant improvements appeared in Tensor Core-related computation.

Ordinary FP32 throughput remained essentially unchanged.

The RTX 3090 Ti's unlocked measurements were also highly repeatable across the direct-connection tests.

RTX 3080 Ti Laptop GPU

The internal GPU was also successfully unlocked, although its performance changes were much smaller.

PrecisionEarlier baselineUnlocked medianChange
FP1632.6553.79 TFLOPS+2.2%
BF1636.1556.98 TFLOPS+1.5%
TF3221.4021.77 TFLOPS+1.7%
FP329.129.22 TFLOPS+1.1%

These figures use our documented November 17 baseline, not necessarily the earliest-ever 3080 Ti performance measurement.

The smaller differences on the laptop GPU may reflect normal measurement variation.

Important scientific limitation: Our comparison uses one earlier locked-state benchmark session and repeated unlocked sessions. It is not a fully controlled alternating locked/unlocked experiment, so power, clock and environmental differences cannot be entirely excluded.

Also, these results describe synthetic GPU matrix throughput. They do not establish equivalent gains in LLM tokens per second, video-generation speed or image-generation time.

7. The final challenge: getting the Dell Thunderbolt dock working

Initially, the successful unlocked Windows tests used a direct Thunderbolt connection between the laptop and Sonnet enclosure.

But that was not my desired everyday workstation arrangement.

I needed:

Laptop → Dell WD22TB4 dock → Sonnet RTX 3090 Ti

We shut the system down, moved the Sonnet connection to the Dell dock, and restarted Windows.

Both GPUs appeared correctly.

The external RTX 3090 Ti received a different PCI bus address because the Thunderbolt topology had changed.

We verified NVIDIA driver initialization and performed CUDA kernel calculations on both GPUs.

Both passed.

Next, we repeated our EFI unlock experiment with the Dell dock already connected.

After Windows started, the register diagnostics confirmed:

RTX 3090 Ti: UNLOCKED

RTX 3080 Ti: UNLOCKED

The temporary USB4 service setting was then restored to its normal value.

Both GPUs continued working.

8. Proving the dock was not reducing AI performance

One final question remained.

Would routing the RTX 3090 Ti through the Dell dock reduce the unlocked computational throughput?

We repeated the matrix-multiplication benchmark.

PrecisionDirect Thunderbolt, unlockedDell dock, unlocked
FP16141.74141.39 TFLOPS
BF16144.28144.90 TFLOPS
TF3274.6874.80 TFLOPS
FP3229.2929.43 TFLOPS

The differences were negligible within this test.

This established that our Dell dock connection was not meaningfully reducing measured Tensor Core computation.

It does not imply that the dock has no bandwidth limitations for CPU-to-GPU transfers or other workloads.

9. Final system verification

At the end of our successful test, we had:

Operating system: Windows 11

Internal GPU: RTX 3080 Ti Laptop — UNLOCKED

External GPU: RTX 3090 Ti — UNLOCKED

External connection: Sonnet enclosure through Dell WD22TB4

NVIDIA driver: 617.42

CUDA: Both GPUs passed real CUDA kernel execution

GPU Device Manager errors: Code 0 on both

USB4 Host Router startup: 3

USB4 Device Router startup: 3

RTX 3090 Ti FP16: 141.39 TFLOPS

RTX 3090 Ti BF16: 144.90 TFLOPS

RTX 3090 Ti TF32: 74.80 TFLOPS

Two external Dell monitors were also detected. Windows still reported the Dell and Sonnet USB4 router entries as Unknown during the unlocked session, so not every downstream dock function was independently verified.

10. What this experiment does — and doesn't — prove

This was an experimental, software-controlled unlock of GPU feature registers.

It was not a physical hardware modification, GPU BIOS flash, VRAM expansion or permanent firmware unlock.

The register state is volatile.

A restart, GPU reset or Thunderbolt reconnection may clear it.

The results should not be interpreted as proof that every RTX 3090 Ti or RTX 3080 Ti can obtain the same performance gains.

I would strongly caution anyone trying similar experiments to understand UEFI recovery, Windows driver initialization, PCIe/Thunderbolt resource allocation and the possibility of boot failures or device loss.

The biggest achievement was not simply modifying register values.

It was systematically validating the complete path:

UEFI initialization → GPU register unlock → Windows boot → NVIDIA driver → CUDA execution → register verification → performance benchmarking → Thunderbolt dock integration.

Final thoughts

This project required persistence, careful measurement, and repeated troubleshooting across firmware, operating systems, device drivers and GPU computation.

The result was a running Windows workstation with both Ampere GPUs reporting unlocked, a functioning RTX 3090 Ti CUDA compute path through a Dell WD22TB4 dock, and a repeatable, substantial improvement in the external GPU's measured FP16/BF16/TF32 matrix throughput.

My next goal is to measure how much of that improvement translates into real AI workloads: local LLM inference, image generation, video generation and other GPU-intensive applications.

Hardware experimentation becomes much more valuable when every claimed improvement is backed by diagnostic evidence, repeatable benchmarks and clearly stated limitations.

#NVIDIA #RTX3090Ti #RTX3080Ti #CUDA #GPUComputing #Windows11 #Linux #Thunderbolt4 #ArtificialIntelligence #MachineLearning #AIEngineering #PerformanceBenchmarking #UEFI #OpenSource


r/eGPU • • 1d ago

Oculink eGPU seems to be unstable compared to USB4

Post image
29 Upvotes

So I'm having this issue where I have this minisforum DEG2 eGPU dock with a 5070 Ti and using it with a Owltree M2 to Oculink adapter on my laptop's spare SSD slot and for some reason I've been getting random video tdr Bsod. I tried setting power management plan to max performance and setting Pcie speed to to 3.0 via registry editor since my bios is locked and even tried increasing the video tdr delay but all of them don't work. Even tired contacting Nvidia and still didn't help. There is this one detail where if I turn off my desk light, the eGPU would result in a. Video tdr. And this dose not happen on a USB4/Thunderbolt connection so I'm wondering if it's the adapter since the minisforum dock has a redriver built in so I'm wondering if the adapter ribbon isn't shielded. If anyone knows what's going on let me know.


r/eGPU • • 13h ago

Mini pc egpu

1 Upvotes

Tengo una dudas, mi mini pc tiene un solo puerto m.2 mvne donde está instalado mi winds un ssd me.2 2280 pero donde va ese puerto pienso instalar una GPU externa por medio de un adaptador, entonces desconecto el m. 2 SSD 2280 donde esta mi Windows para instalar la gráfica, y ese SSD q quite lo pasaría a una carcasa de 40gbps y lo conectaria por medio de USB 4 y cambiará el arranque desde la BIOS para q arranque mi Windows por medio de uds 4 donde esta el SSD m.2 2280 con la carcasa de 40gbs, habría algún problema o incoveniente, funcionaría ?


r/eGPU • • 17h ago

Looking for TH3P4G3 ATX Accessories (US)

Post image
2 Upvotes

Good day everyone! I recently bought an TH3P4G3 (ATX) from the market place, but it did not come with the original metal brackets, psu pad, and the screws. Does anyone know where I can source replacements for these?


r/eGPU • • 22h ago

Blackmagic eGPU on Linux: nine days of testing, one hardware wall (full write-up)

2 Upvotes

Setup: Blackmagic eGPU (Radeon Pro 580, subsystem BDBD:A14C) on a 2019 iMac (iMac19,1) running Kubuntu, Thunderbolt 3. The same machine has an internal Radeon Pro 570X — same Polaris family — which gave us a working twin to diff against, register by register.

What works: the card enumerates, the unassigned-BAR problem is solvable (three different ways documented), and once the SMC firmware is started from the virgin state, the SDMA and RLC firmware loads cleanly.

The wall: the graphics-core (CP) firmware load never completes. The card's SMU orders a hardware transfer (command byte 0x40) that never happens on a card that arrives cold over the Thunderbolt tunnel, and the driver dies with "SMU load firmware failed," probe -22.

What we ruled out before concluding that, over nine days: both the Linux and genuine Apple SMC firmware builds (extracted from macOS and run byte-clean — they stall identically), Apple's own driver sequence (a 1:1 port of the Linux one), ~1,160 registers diffed between the cold card and the working twin in virgin and post-attempt states, EFI-stage placement via a custom UEFI shim, Apple's EFI drivers (carved out of the iMac firmware — they're display-only, the card gets no EFI init), userspace AtomBIOS POST, and a one-byte SMC firmware patch (rejected by the card's keyed firmware signature — the firmware is cryptographically locked against modification).

Worth noting: this card reportedly works via VFIO passthrough on a normal PC (Framework community guide) — the iMac case is specifically poisoned by the boot chain resetting the card at OS handover. If you've fought this card on other hardware, the data may still save you time.

Full record, all tools, all failures: https://github.com/razer1989-tech/cold-card


r/eGPU • • 1d ago

My first eGPU setup with 9070 XT I'm getting strange behavior

3 Upvotes

This is my first eGPU setup and I am getting strange behavior.

My setup is:

Minisforums M1 Pro 285H

DEG 2

750W PSU

Using Oculink for connection

In Arc Raiders for example, I started at 4k Native mid settings. FPS is at 120-130 and power draw is 300+ watt, completely fine.

I tried changing settings to gain more FPS and applied FSR Quality/Performance..etc. No matter what preset I use the result is the same. It is stuck at the same FPS but power draw suddenly goes down to 150-160W. Even when I remove FSR and use manual upscaling to gain FPS, no gains at all and the card power draw is dropped.

Then I decided to test another game (DayZ) and I get similar behavior. No matter what settings I change in the game, I get no fps gains and the power draw stays very low.

I checked a hundred times for V-sync and made sure its off ingame and in AMD software. I even tried enabling it to see if anything changes but with no avail. Its not a CPU bottleneck since with no tweaks at all the GPU is drawing 300+ watt just fine.

Temperature is fine, stable at +50C.

The only thing that is giving me more fps is using Frame Gen. Power Draw also goes up to 250W+ with that option enabled. This again confirm that it has nothing to do with the CPU or PSU.

I uninstalled intel graphics driver and disabled it, still nothing.

What could be the issue ?


r/eGPU • • 1d ago

Is UT4G available to purchase without the mount options ?

Post image
8 Upvotes

I am thinking of printing my own case so wondering if ADT-Link just sellsT4G alone.


r/eGPU • • 1d ago

What combo of GPU + dock should I get?

2 Upvotes

Guys I own a Lenovo Yoga Slim 7i with a tb4 port, Intel ultra 5 125h and 16gb ram at something like 8000mhz. what gpu and dock would be a good fit for this laptop? My usage will be mainly games, but I also use a bit of CAD and right now Im using some gpu processing images of cameras on a side project that I have (reason why I need upgrades asap)


r/eGPU • • 1d ago

Xiaoyao B Dock disconnecting

1 Upvotes

Hello everyone! I have a Xiaoyao B Dock which connects through thunderbolt 3/4. I have been testing this dock for a while with a 12V10A DC adapter. I have a GTX 1650 without 6 pin. It has 75W TDP. My issue is whenever I try a benchmark or launch a game that is quite GPU demanding, the fan of my GPU ramps up which is normal but after several seconds it will disconnect from my laptop. I tried several fix but it still happens. The last fix I had to do is to underclock my gpu with 65% power limit. It kinda worked but there are some stutters. What do you think is the problem? Is it the laptop, dock, GPU etc. Thank you!

My rig:

Xiaoyao B dock

120W DC adapter (IDK what brand)

GPU: Colorful GTX 1650 Single fan

Laptop (Dell Latitude 5420) Specs:

Core i5-1135G7

16GB RAM


r/eGPU • • 1d ago

New to eGPUs, asking for compatibility advice

3 Upvotes

I own an MSI PRESTIGE 15 A10SC.

In short, relevant specs are

1650 GTX MAXQ GPU,

Intel 10710U

2x Thunderbolt 3 ports.

I was looking to purchase a 5070ti (whichever) with future plans of building a PC of its own with it. My current specs are low to play a very new specific game for work and I was looking up this as a middle term for now. Game is extremely VRAM hungry so I think going down on the graphics card is hard (can afford it no problem)

The eGPU base I've looked up is the AOOSTAR EG02 since it can also charge the laptop at the same time.

I'm reading online about black screen/disconnection issues with such a setup, do you have any advice for this in specific?

I just want to be able to run recent games at the bare minimum with the laptop's screen, 30fps is enough, need to record the game for work. The more options and FPS It can run the better, but it's something I don't really mind at all as long as it works.


r/eGPU • • 2d ago

Anyone here know if this is any good?

Post image
12 Upvotes

Would a gpu and psu be all I need to get this running on my laptop via a thunderbolt port?


r/eGPU • • 1d ago

Do GPUs normally default to max fan speed when not connected to anything?

1 Upvotes

I notice when I power down my Ally X connected via thunderbolt, my 3080ti will go full blast until I switch it off.


r/eGPU • • 1d ago

How to Order Lenovo Lecoo Pro 16?

1 Upvotes

How do I safely order a Lenovo Lecoo Pro 16 in the US?

It had a Panther Lake CPU and a Oculink port, which is essentially exactly what I'd want for an eGPU setup.


r/eGPU • • 2d ago

Finally got my setup working!

Thumbnail
gallery
14 Upvotes

My gpu has been repared, as per my older posts

And i have also made a enclosure with pvc pipes and 3d printed mounts!

The back side of the gpu is supported by a milk carton for now, imma get a 3d printed adapter for it soon.

Also forgive my cable management

How does it look?


r/eGPU • • 2d ago

HP G1A workstation and eGPU

Post image
2 Upvotes

So thanks to this group I have been able to get an egpu setup working in windows for my strix halo box.

I needed to go into the bios and disable fast boot along with quite a few nvme protections to get it to work reliability.

For the installation I wanted something as clean as possible. This is my ai server which will pull duties for text, audio, and video editing for my household. The goal was to balance speed and costs (both upfront and operating).

For the hardware I was able to nicely fit this 40cm long nvme m.2 card to oculink adapter right into the frame and cut one of the spare plastic plugs so it allows a rear oculink port.

ali express 40cm cable for inside the box

I then found a gently used MSI 2x 5070 ( 4060 ti super was also considered). And used this egpu kit. Something to note. I bought the 210mm long enclosure (sfx case) but in reality need a 270mm long one to fit the card and wiring. The configuration really needs aftermarket cables which I'm on the hunt for. Overall I might just make a 2" offset for the back cover and leave it as is once the wiring is shrunk from 65cm to 21cm.

egpu kit with case I used

If anyone else has a similar setup I'd love to hear how your allocation of tasks and prioritized epgu vs internal is setup. Hoping this helps someone else wanting to know if this is durable with the HP!


r/eGPU • • 2d ago

eGPU work with dGPU?

1 Upvotes

I'm using a legion 7 2021 with r9 5900hx and it already has rtx 3080 mobile 16gb vram

I wonder if i can connect a eGPU to work with my 3080 like a second gpu(or maybe the 3rd if the Amd igpu make sense)

Like a rtx 3090ti desktop and i will have 16 + 24= 30 gb vram combine


r/eGPU • • 2d ago

Using an eGPU to turn my Lenovo Yoga 9 2-in-1 into a gaming laptop

3 Upvotes

Given my very limited knowledge and small amount of research I have done I believe I have the right amount of processing power to run games, just lacking a good graphics card. Processor is an Intel Core Ultra 7 155H with 16 GB of RAM. Friends of mine want me to get a gaming PC but I can't bring myself to spend $2,000 on a gaming PC.

  1. Is this even possible?
  2. What are my best options when it comes to a good graphics card, enclosure, and power supply?
  3. Is it recommended to get an external monitor?

I'm not trying to spend much more than $1,000.

Sorry for all the questions, I am a noob.
41


r/eGPU • • 2d ago

Noob here - can I use USBC output on my W5700?

Post image
15 Upvotes

Been reading up this weekend on egpu's and found the AMD W5700 to be right in my budget to performance ratio sweet spot. My Minisforum UM870 Slim has USB4 but no Oculink. I know I need to provide power to both the slot and the 6-pin on the card - what's the simplest/cheapest method to accomplish both? Main goal here is playing games... card is PCIE 4.0 x16

Would be great if I could just use the USBC (DP alt) output from the card directly to my PC.


r/eGPU • • 2d ago

eGPU to laptop for local AI

1 Upvotes

I just upgraded my gaming pc to a 9070xt but it's not as beefy as I'd like for ollama. My old one was a 3090. I want to build a local AI machine with my laptop instead and was wondering how the whole setup works as I'm very much out of the loop with using eGPU at all. My laptop is a Zephyrus G14 so I have a capable USB-C port already.

I just need to know what you'd recommend, whether it's a docking station or just an adapter and perhaps a separate PSU? (I'm thinking that's gonna be the setup because my 3090 is power hungry).


r/eGPU • • 2d ago

[PSA] Tesla P40 doesn’t work with Alienware Graphics Amplifier on my 15 R3 — BIOS disables PEG1

1 Upvotes

I spent quite some time trying to get an NVIDIA Tesla P40 24GB datacenter GPU working with my Alienware 15 R3 and Alienware Graphics Amplifier (AGA).
Unfortunately, no success.
Here’s what I confirmed:
A GTX 1660 Ti works perfectly through the same AGA.
The Tesla P40 is detected in another desktop PC (10DE:1B38).
With the P40 connected to the AGA, the BIOS displays an “Unrecognized device” warning.
The PCIe root port 00:01.1 (PEG1) disappears from enumeration.
The CPU’s DEVEN register reads 0x000000BB, indicating that PEG1 is disabled.
I investigated UEFI variables and BIOS initialization routines, but couldn’t find a working fix.
Intel Boot Guard Verified Boot is enabled, making direct BIOS patching too risky.
My suspicion is that Dell’s AGA firmware initialization doesn’t handle the P40 properly, although I haven’t established the exact cause.
**This doesn’t prove that all datacenter GPUs are incompatible with AGA. It’s one documented failure involving the P40 and Alienware 15 R3.**
I’m posting this to save other AGA owners some troubleshooting time.
If anyone has successfully connected a Tesla P40/P100 or another NVIDIA datacenter GPU through an AGA, I’d love to hear about it!
I’ve also posted a more detailed technical investigation in r/eGPU, including the PCIe register findings.


r/eGPU • • 3d ago

Gutes 1m occulink Kabel?

5 Upvotes

Ich will meinen Um890 an die deg2 anschließen, nur der Abstand wäre mir mit dem mitgelieferten Kabel zu kurz. Es gibt soooviiiel Schrott da draußen - was funktioniert bei 1n Länge??


r/eGPU • • 3d ago

eGPU 3060 TI 16GB for LLM

Post image
29 Upvotes

I made a typo, it's a 5060 TI 😅

I added a 5060 TI 16GB to my Minisforum MS-01 i9-12900h for a LLM. It's currently running Qwen3-8B-Q4_K_M with 26 GPU layers. I use it to add AI features on my web app.


r/eGPU • • 4d ago

I added an RTX 3060 Ti to my ROG Ally X and the difference almost brought a grown man to tears �

Post image
54 Upvotes