Hi everyone,
On my e-bike (Giant Expression E+, Yamaha mid-drive, Gates CDX belt, Shimano Nexus hub), I get a rhythmic rubbing noise synchronized with pedaling. It stops completely when coasting, and I'm certain it comes from the belt itself—when I turn the cranks slowly by hand, I can clearly hear the rubbing right around the rear sprocket area.
What I’ve checked & done so far:
Rear sprocket: Checked by hand—completely solid, zero play.
Belt tension: Recently adjusted to ~60 Hz (via the Gates app), though the exact same issue was already happening before when the tension was lower at around 45–50 Hz.
Cleaning & care: After previously using dish soap (which caused stick-slip), I thoroughly rinsed the belt with regular low-pressure water to strip all residue, let it dry completely, and applied a light dry silicone film (Dr. Wack F100) only on the outer side flanks using a microfiber cloth (teeth kept completely dry).
Current issue: It runs silently right after, but after 12–20 km on damp roads, the belt picks up a fine dark film again and the rhythmic rubbing noise comes back.
Any ideas on what could be causing this noise to return so quickly or how to fix it for good?
Thanks!