r/electronmicroscopy • • 11h ago

Help for CMC composite TEM images analysis

2 Upvotes

Good morning everyone, I'm a Materials Engineering student and I would really appreciate your help. I'm currently working with TEM images of an aluminium alloy–aluminium oxide composite (unfortunately I can't go into too much detail), but I don't have enough experience to analyse them, and my supervisor is 1) very busy and 2) on the other side of the world (literally).

So I'd like to ask for your help in finding my way into this field. I know the basics of how a TEM works, but I'd like some "guidance"/reading material to dig deeper and at least be able to set up the analysis while I wait for my supervisor to review my work.

P.S. Unfortunately, my supervisor has no books or reading material to give me, as everything he knows was passed down to him by word of mouth, like some kind of state secret.

Thank you for your help.


r/electronmicroscopy • • 6h ago

What's your secret for the best STEM images?

4 Upvotes

Hello!

We have a Thermo Apreo 2S SEM and STEM is our most used imaging method of nanoparticles for size and morphology. Recently, we had to have an FSE onsite after we saw some drift that was too extreme to image with. He did some things, and upon leaving sent an email with the following recommendations:

  1. Allow system to pump down to mid or low e-4Pa before imaging
  2. To minimize image drift on STEM samples, after finding area of interest, allow sample site to sit 30min -1 hour before making images.

Number 1 makes total sense, but the second point he made wasn't shown or conveyed to me by either of our two application engineers that trained me. We use the system for classes - imaging nanoparticles synthesized in inorganic labs and bacteriophages in biochemistry labs, so the waiting for almost an hour is going to be tough. Furthermore, we know we have some contamination somewhere as we can see the carbon block appear on our sample as the beam sits.

I was curious what everyone else does to get really good STEM images? Of course, when I emailed folks that I was going to be trained and would like them to provide samples for said training, not a soul got back to me.

Right now, if the sample is metallic nanoparticles, I have people use our plasma cleaner that we have (it is not one that can be on the microscope). For organic type that won't survive the plasma cleaner, people just let them dry naturally. I have purchased a desiccator that can have a vacuum drawn on it and have been pushing people to use it.

I have plenty of Lee-Miesel Ag nanoparticles I can put on a grid to practice with.

Thanks to anyone willing to share their experience/expertise!