r/fixit • • 16h ago

open Garage door suddenly stopped working

42 Upvotes

The chain track has always kind of slacked when pulling up, and the rollers on the sides are unobstructed. I had the motor unit changed about 3 years ago, and Overhead Garage .

Solved: looks like the spring snapped on both left and right side. I'll be calling in someone who knows what they're doing for this. Thank you every one. First time posting here, very appreciate everyone being kind and helpful.

Edit2: do I flare this as "fixed" in that I know what the issue is? Sorry, new to posting here.


r/fixit • • 3h ago

Welcome to Orphaned Products! The support doesn't have to end.

Thumbnail reddit.com
2 Upvotes

r/fixit • • 3h ago

Wall Repair Help

Thumbnail
gallery
2 Upvotes

Any tips for how to fix this?

Unfortunately the previous owners decided to install a cheap IKEA wardrobe before refinishing this portion of the wall.

I have some plaster of Paris I planned on applying but I am concerned about the separation between the flooring and the bottom of the wall.

Would it be the worst idea to use some spray foam to build that area back up to make it mostly flush?

Any and all advice is welcome, thanks!


r/fixit • • 10h ago

Fridge Ice Maker build up

Thumbnail
gallery
2 Upvotes

We have a Kenmore Elite fridge that came with the home we purchased about a year ago. The fridge is now 13 years old. I changed out the filter for the water/ ice and decided to inspect and clean the automatic ice maker tray. I had to cut the power to the fridge mid test cycle to keep the tray upside down and visible.

In the photos you can see there is a blue or turquoise color build up along the edges and in the bottom of some of the slots on the ice tray where the water sits to freeze. The build up is not flaking off, and not cleaning off easily, it seems like a stain on the plastic from something.

Doing some research I'm finding that it could be from the old copper pipes, and its building up inside the ice maker. Also seeing the possibility of it being the ice tray coating of some sorts or a mineral build up or scaling.

Has anyone had this happen and what is this build up if you know and any possible fixes.

Thank you.


r/fixit • • 23h ago

open Snapped rotor on transmission spindle and need ideas on how to remove

Thumbnail gallery
2 Upvotes

I snapped the rotor when trying to remove it and managed to remove all of the plastic but the metal piece is stuck on there. The first picture is the new rotor I bought and you can see the metal piece is about a 1/4 inch thick.

I've tried hitting all sides with a hammer and screw drivers. Even left penetrating fluid on it over night. I did a bit of research and a cobalt bit with a hand drill should drill through it but I'm not sure if I'll be able to get close enough to the spline without damaging the grooves. I've thought about super gluing something metal to it and pulling on it as well. There's very little space to get in there.


r/fixit • • 53m ago

Wassersäule will nicht (Brunnenpumpe)

Thumbnail gallery
1 Upvotes

r/fixit • • 1h ago

Triple square M8 removal help

Post image
1 Upvotes

r/fixit • • 1h ago

open How to screw it in?

Post image
1 Upvotes

I wanted to clean the drive, so I unscrewed this bolt, and now it won't screw back in.


r/fixit • • 3h ago

Repairing Cracked Fridge Ice Assembly

1 Upvotes

I have a Samsung French Door fridge (RF31FMESBSR/AA).

The ice assembly (container, auger, crusher, etc.) has been leaking and it turns out that it has a big crack down the bottom of the container (including a hole in the middle of the crack where a piece of the plastic broke off and disappeared) and a few cracks in the back where the auger mechanism hooks into the fridge hardware.

I'm trying to figure out what the best way to repair this is, since a replacement would cost $200.

Can anyone recommend a food-safe glue or bonding agent that could reasonably keep this thing from continuing to leak?


r/fixit • • 4h ago

Fix installllll

Post image
1 Upvotes

r/fixit • • 5h ago

open Need help on how to put a tomato timer back in place?

Post image
1 Upvotes

My youngest sister asked to bring my tomato timer at school while I was not at home, I told her to NOT bring it at school MANY TIMES as she's prone to break stuff, she called me and I still said no, yet she stubbornly and stupidity, bring my tomato timer at school, the timer fell and broke as she described.

I wanted to fix it on my own through internet, but I can't find any assembling videos on YT of this tomato cooking timer neither websites, do you guys any idea how to fix this? Or should I still insist to make her pay for it?

I'm a visual learner so I might get confused if it's on text, unless the text is clear


r/fixit • • 6h ago

open LG 32LN575S-ZE TV won't turn on with flashing light.

Thumbnail
gallery
1 Upvotes

I have an LG 32LN575S-ZE TV that doesn't turn on anymore. At first it started restarting on it's own during use for a few seconds until it stopped to turn on completely. Whenever I press the power button the screen doesn't do anything only the light at the bottom flashes as shown in the video. I tried taking out the batteries out of the remote in case the remote button was malfunctioning but it didn't help. I also tried a different power cable but it still only flashes. Can I fix it?


r/fixit • • 8h ago

Water infiltration in my wall

Thumbnail
gallery
1 Upvotes

Hi everyone,

We bought a house built in the 1960s and have been living in it for about a year. The walls are made of hollow concrete blocks. We still need to redo the façade, it's not very pretty...

During strong wind and rain, a blister appears on the wall in our living room. There are no other leaks anywhere else in the house.

The problem is that on the outside, directly opposite the blister, I can't see any obvious crack or hole. At first I thought the water was coming in from a bit higher up (there were a few spots with no render, where the bare concrete block was exposed), so I patched those, but it didn't change anything.

I've circled in green where the blister appears, as seen from the outside.

What do you think?

Thanks!


r/fixit • • 8h ago

Where do the washers go in relation to spacers 23 ("pulley bushing") - worth reading just for the names

Thumbnail gallery
1 Upvotes

r/fixit • • 10h ago

Bought an older CD player, but it suddenly stopped working

Thumbnail
gallery
1 Upvotes

Hello everyone!! Hoping I can get some other opinions on how to fix this older CD player of mine.

Please forgive me in advance, as I'm not too bright when it comes to electronics- I just fell in love with this thing and want it to work again. I appreciate everyone's patience!

I bought this CD player a few months ago, and it was second (technically third) hand from someone who bought it at an estate sale. It didn't come with any manuals, or descriptions on how everything worked, but when I took it home and played a CD- it worked perfectly. No issues.

Eventually the batteries died, so I changed them out. (it takes C size batteries, 6 of them)

It still worked fine after that, but this time the batteries died quicker. Changed them yet again.

It stays on, just barely now. When the batteries are in the player, it shows the time, and sometimes allows the "light" button to turn on. If I hit the "on" or "off" button, of course, it stays off until I take the batteries out and put them right back in. But it refuses to play any music! Not even the radio option works.

It's like a glorified clock at this point.

I checked the inside of the battery compartment(?) and nothing seemed corroded or ruined.

I also cleaned the reading lense just in case but that didn't seem to be it.

I'm not sure if it's the batteries I use, as the first ones were some generic no name brand (I threw those away so long ago I can't remember them,) but the second and third set were Energizer Batteries.

I also tried buying an AC adapter, as the CD player DOES have an option to plug those into it. When the adapter goes in, however, the machine turns off and won't even show the time until it's unplugged again.

I'm at a loss. I don't know where to go next. Hopefully you guys have more ideas than I do! 🙏

Summary:

Bought an older CD player that originally worked fine. Replaced the batteries in it a few times with no real issues, but now all it shows is the time and won't play music. I cleaned the reading lense and that didn't work, and there's no corrosion in the CD player itself. Bought and AC adapter as well, and that seems to just turn the CD player off all together.


r/fixit • • 10h ago

Best way to repair water-damaged exterior porch column paint?

1 Upvotes

I have an exterior porch column/trim with some paint that has bubbled and swollen from water exposure. There are a few cracks and areas where the paint is peeling, but I'm hoping to avoid turning this into a major repair project. The existing color is Sherwin-Williams Accessible Beige (SW 7036). I'm looking for the simplest reasonable repair that will prevent further water damage, rather than completely stripping and repainting the column. Any recommendations for specific products (preferably small quantities like a quart rather than a gallon) would be appreciated!


r/fixit • • 10h ago

open (urgent) Main water shutoff valve lever broken. Struggling to find replacement

Thumbnail
gallery
1 Upvotes

Trying to make sure I dont buy a wrong replacement when stores open but I'm lost on what to get.

  1. Struggling to find levers. Is it recommended to just buy an entire ball valve just for the lever handle (then just use the lever)? i.e. this or this is all I found on home depot's site
  2. Does the size of the valve itself (i.e. 3/4", 1", 1.25") even matter for the lever? Stem hole matches (1/2" x 3/8")

r/fixit • • 11h ago

Blinds stuck

Post image
1 Upvotes

Hey all,

Wondering if I could get some help. Ive been beaten.

My blackout blinds are stuck closed. The blinds are currently completely down and im trying to wind it up to let the light in for the day.

Pulling the right string in the picture down is what opens them, but somehow the little plastic nib thing has ended up at the top of the mechanism. Now when I try to pull the right string down, the nib just gets stuck against the mechanism at the top.

Any advice on how to get around this?

I hope i explained that well


r/fixit • • 13h ago

intended as a gift, arrived in 2 pieces

Thumbnail
reddit.com
1 Upvotes

weigh in ? it's small !


r/fixit • • 14h ago

Anyone know what could be wrong?

1 Upvotes

r/fixit • • 14h ago

How to fix bridge/nosepad in glasses

Thumbnail
gallery
1 Upvotes

Hello! My nose pad and the wire connecting it to the bridge of my nose broke off. I taped it together but it’s still flimsy ofc 😭 any recommendations of how I can fix it or where? I legit just picked them up and it broke off.


r/fixit • • 14h ago

Headboard won’t stop slamming wall

Thumbnail reddit.com
1 Upvotes

I’ve got an adjustable base bed I love and a headboard that screws into brackets to connect. I’ve tried tightening some bolts and adding a bunch of rubber/foam thick stoppers but for whatever reason it’s still making noise during sex. The neighbors share a wall and bang back even when the noise isn’t even that loud. I don’t know how fix this anymore but there’s gotta a be a way to soundproof this adjustable base bed. Open to getting a new headboard completely at this point. Appreciate any help.


r/fixit • • 15h ago

Trying to fix my desk chair — help!

Thumbnail gallery
1 Upvotes

r/fixit • • 16h ago

Fridge making noise

1 Upvotes

Could someone please help me figure out the root cause of this sound?

Planning on pulling the fridge out tomorrow morning. Sounds like a belt slipping to me?