r/framework • • 24m ago

Community Support Framework 13 diy input cover not fitting in properly/bulging

Thumbnail gallery
1 Upvotes

What’s causing it to bulge right that? Is there something wrong or should I just fasten it?


r/framework • • 1h ago

Framework Photo I'll just leave this here. FW13 pro. Intel.

4 Upvotes

r/framework • • 3h ago

Meme Got a reparable laptop before GTA6!

Thumbnail gallery
54 Upvotes

My Framework came in today after the customs delay with the whole FAA fiasco. Still got it before GTA6 unlocked for my region!

Gonna get it built and booted. So excited for this build and to have a fresh clean new laptop!

Kinda surprised there is no branding whatsoever on the box. On one had I appreciate the discreet packaging for shipping but also, I wanted to make a Wallart poster. We'll see what I can come up with and will likely check back in when the build is done.


r/framework • • 3h ago

Community Support Clicking sound coming from the top of the bezel when closing the lid

1 Upvotes

Has somebody else experienced a clicking sound (that seems to come specifically from the part of the bezel that holds the camera) when closing the lid on the Framework 13 Pro?

I want to know if I did something wrong on my side (the cables on the hinge are fine and the bezel fits perfectly) or if I should contact support directly.


r/framework • • 9h ago

Community Support Error 504 on microbit while using a framework

Thumbnail reddit.com
3 Upvotes

r/framework • • 13h ago

Feedback 13 Pro shipped without charging cable, support not helpful

Thumbnail gallery
42 Upvotes

I received my prebuilt X7 13 Pro at the start of this month, and the laptop itself has been almost perfect aside from a minor issue that support was great about.

However, I never received the AC cable to connect the power brick to the wall. I've been going back and forth with support for 10 days now, and they still haven't understood the issue, despite me sending photos from various sources of the missing cable. At first they thought I was talking about the USB C to C cable, and at this point they think I'm talking about a desktop AC cable.

I've added a couple of photos here that I've provided to support. The cable in the first photo is the missing one, and the second photo is what I received. If one of the great mods here could help out with my case it would be very much appreciated :)


r/framework • • 13h ago

Discussion Pro 13 need skin/cover?

6 Upvotes

I have heard both praise for the new finish on the lid but also concerns of fingerprints.

For those that don't have a skin/cover, what's stopped you from doing so?

For those that do have a skin/cover, was it for looks or for preventing fingerprints/scratches?

Is there someone/somewhere with a Logo cutout template that I can either Print and use as a guide or send to my Cricket machine? Pick my own vinyl print cover if I wanted that way.


r/framework • • 16h ago

Personal Project May I present... my FRAMEnstein!

Post image
129 Upvotes

tl;dr: I built a Framework 13 Laptop for around 1000CAD with taxes and shipping

The full story:

So it all started in September 2025 during a certain Mystery Box frenzy.

I have been very interested in Framework for the last 3 years or so. I always promised myself that my next upgrade would be a Framework laptop. But I was still running a trusty Thinkpad T580 that I had upgraded alot during it's lifetime (RAM, storage, 4K LCD panel) and well, a Framework laptop was not really in my short term plans.

But I caved into the Mystery Box... just for fun. It felt a bit like a lottery and seeing posts here about people getting decent hardware for a few dollars, I thought that I could also be lucky.

So I bought a Mainboard and a Large box. I received an Intel i7-1260p mainboard, 2 Input covers with QWERTY keyboards (I only recently discovered that I have a Gen 1 and a Gen 2 with the Super key instead of the window logo) and a LCD panel. After a bit or research, it turned out to be the standard 2.2k screen.

I was happy because this meant that I could swap my SODIMM DDR4 into the new mainboard. RAM was becoming expensive and not having to buy SODIMM DDR5 was a good thing. But I never was able to have the board running. The lights would go on, the fan would spin, the CPU would become hot, but nothing. So a friendly Redditor offered me to test it. Unfortunately, the board was dead. Nothing we could do or fix. So I was stuck with two input covers and a LCD panel.

Come February 2026 and Mystery boxes came back in stock and decided to buy an other one. Just the mainboard. And I received... an Intel Core 7 165H. Looking at the specs, this CPU is a beast! But... it takes DDR5! I inspected the mainboard, and except for some crooked fins on the heatsink, everything looked normal. But I could not test it. No way I would splurge on RAM for something I was not sure it worked. So I placed the mainboard in a box next to the rest of the hardware.

A few weeks ago, an other Redditor had stocks of SODIMM DDR5 for sale in a hardwareswap sub. Price was pretty good. They were only 8GB sticks though. But the price was right. Why not just buy one to test it. Yeah... but if it works, I am stuck with only 8GB of RAM. Why not buy two? Worse case, I would resale it fairly easily and lose almost no money on it. So I bought two and received them a few days later.

I popped them into the mainboard. I added a 512GB NVME stick that I was using for backups. Connected the LCD panel and the input cover. Connected the mainboard source and turned it on. The power button turned blue. That's good! The fan started, then stopped. I had that grey/blue light next to the power source. It felt like the mainboard was hesitating and suddenly... some tiny writings appeared on the screen! IT WORKED! It was alive! Alive! So I checked a few things into the BIOS, and try to boot the OS on the SSD, but it was not working. It felt like boot looping. I tried a Ubuntu Live USB stick and it was going nowhere. I tried a Medicat thumb and it would hang. I tried a Fedora Live USB stick and... we have a live OS! A messing around, I just had to set the time and date properly for any OSes to load correctly. But what about the NVME stick? Well, I did a few tests on it and it had bad sectors and was unreadable. It was under warranty so I was able to RMA it and quickly get a replacement.

In the meantime, I started looking for Framework parts. My initial plan was to use it standalone. But I had that itch to have a full Framework laptop. Plus I had recently receive a nice bonus at work. So I started checking parts on the Framework website. And there was alot of refurbished parts available compared to the last time I had shopped on it. So I started to put some parts in my cart.

RTC Battery (I was not sure I need one)
3.3kg Hinge kit - Refurbished
61wh Battery - Refurbished
Top Cover CNC - Refurbished (Included WIFI Module + Antennas and Webcam cable)
Bottom Cover Kit - New (included Audio Module, Speaker and WIFI bracket)
Fastener Kit - Bottom Cover and Mainboard (was not sure I need them)
Fastener Kit - Top Cover (same)
3 USB-C Expansion Cards
3 USB-A 2ng Gen Expansion Card
MicroSD 2nd Gen Expansion Card - Refurbished
Grey Bezel - Refurbished.

I received all the parts today and well... I guess I now have a Framework 13 laptop.

The overall cost is around 1000CAD including taxes and all the shipping from the Mystery Box.

Intel i7-1260p Mainboard55Mystery Box - DId not work
2nd Gen Input Cover25Mystery Box (received 2)
2.2k LCD Panel0Included in Mystery Box
Shipping20
Intel Ultra 7 165H70Mystery Box
Shipping20
RTC Battery12Don't really need it
Hinges 3.3kg12Refurbished
Battery 61wh69Refurbished
Top Cover CNC85Refurbished
Bottom Cover129New
Fasteners - Bottom + Main.7
Fasteners - Top Cover7
3x USB-C Exp. Car36
2x USB-A 2nd Gen24
Bezel Grey49Refurbished
MicroSD 2nd Gen14Refurbished
Shipping20
2x 8 GB SODIMM160Bought from Redditor
TOTAL814CAD (before taxes)

A few extra expenses: 40CAD to ship to first board for testing and 20CAD for EEPROM Flash BIOS Kit.

I know 16GB is a bit thin, especially with my T580 running 64GB. Eventually, I will update it to 32GB.

I picked up a grey bezel hoping to match the chassis, but plastic vs aluminium, the colours are not quite the same. I also made a mistake in ordering the USB-C expansion cards. I picked grey ones instead of silver.

Overall, I am pretty happy. I configure the same laptop on the framework page and brand new, all of this would have cost more around 3100CAD (with taxes I think).

I am usually not that lucky. But overall, I am pretty happy with the outcome.


r/framework • • 19h ago Bravo

Guide FW 13 Pro [Linux]: Disable the touchpad as a wake source to prevent the laptop from hotbagging

72 Upvotes

The Framework 13 Pro haptic touchpad seems to be quite sensitive to static charge buildup and spurious input, especially when the laptop is closed and in a bag being moved around. Unfortunately it is also a wake source, so it will bring the laptop out of sleep whenever it registers movement or a click. In a moving backpack where the laptop can jostle and flex, it appears to do this almost constantly.

You can verify this is happening by looking at

journalctl -b -0 | grep -i "lid\|suspend\|wakeup"

It will manifest as a bunch of short 1-3 minute wakeups, where the laptop wakes, notices that the lid is still closed, and then eventually go back to sleep, only to be immediately woken back up again by the touchpad.

Double check that the touchpad is enabled as a wake source:

grep . /sys/bus/i2c/devices/i2c-PIXA3854:00/power/wakeup

It should show "enabled".

You can disable the touchpad as a wake source by adding a udev rule.

Create the file /etc/udev/rules.d/90-disable-touchpad-wakeup.rules and add the line:

ACTION=="add|bind", SUBSYSTEM=="i2c", KERNEL=="i2c-PIXA3854:00", TEST=="power/wakeup", ATTR{power/wakeup}="disabled"

Then save and reboot.

After rebooting, run:

grep . /sys/bus/i2c/devices/i2c-PIXA3854:00/power/wakeup

It should now show "disabled". You can put the laptop to sleep and then verify that clicking the touchpad no longer wakes up the laptop.

I hope this can prevent people's Frameworks turning into mobile backpack furnaces.


r/framework • • 20h ago

Question Does anyone knows when Ultra X9 388H Batch 3 ships in December?

0 Upvotes

:3

edit: thanks for all the help:3


r/framework • • 21h ago

Community Support Errors while trying to boot from USB, then kernel panic

Post image
4 Upvotes

r/framework • • 21h ago

Meme Why is there a perfect gap for a 3V Battery 💀

Post image
299 Upvotes

The input cover fits without issues. I‘m very tempted now to put an airtag inside.


r/framework • • 21h ago

Question Framework 13 usb port issue with trackball

5 Upvotes

this is so odd, I'm a little hesitant to email them about it because they'll think I'm missing something in the description.

11th gen 13 series laptop. Two USB connectors on each side, left and right. All four of them are fine, they work with USB drives and other peripherals, but the ones on the left won't recognize a mouse or a trackball. The ones on the right do.

I have several USB expansion card connector things and I've tried swapping them out, that's definitely not the issue. The same trackball + connector card that doesn't work on the left works fine on the right side. I've connected power and USB drives on the left side and they're absolutely fine

ETA to add that the framework laptop is my primary computer, I use it literally every day of the week and this issue started two hours ago


r/framework • • 21h ago

Discussion Framework survey peripherals

29 Upvotes

After preordering the wireless keyboard there was a survey sent and question about peripherals that we'd be interested in. That made me realize I'd be really interested in a modular docking station. Basically replicate what desktop and laptops do with ports and voillea.

That way you buy a dock that you put only what you want/need and where that makes most sense (front/back/side).

Any other ideas that haven't come up yet?


r/framework • • 1d ago

Linux Weird Flickering FW13 Pro

11 Upvotes

Edit-Fixed: Add "xe.enable_psr=1" to the Grub menu. This is important if you are using an Intel Core Ultra 5 processor; do not use "psr=1", as that caused a black screen after unlocking the system.

Hey everyone, I got my 13 Pro, Intel Ultra 5 last week on Thursday and am so far really happy with it and have had no problems.

Just now I opened the laptop and had some really weird colorful lines. These normally disappeared after a second but they stayed for a few seconds this time.

Now I have some weird flickering; see the video. It goes away if I move the cursor, so I think and hope that this is a software bug.

I have attempted to install all available updates and new drivers, but the problem persists. Furthermore, I have not installed any software or updates within the last two hours, when I didn't have any problems. Has anyone else encountered a similar issue, and does anyone know how to resolve it?


r/framework • • 1d ago

News Pre-orders open on Framework Wireless Touchpad Keyboard

34 Upvotes

They're open go go go


r/framework • • 1d ago

Discussion Finally, a couch keyboard you want to use: Framework Wireless Touchpad Keyboard ($100 usd)

Thumbnail youtube.com
416 Upvotes

What are your thoughts, personally I really like the design, but I think they priced it too high


r/framework • • 1d ago

Feedback 800 euros a fair price for a used Framework 13?

7 Upvotes

Hi all

I'm looking at a used Framework Laptop 13 and would like a sanity check on the price before I buy. I have bid 800 euro for the laptop and the seller is reserving the machine for me

My question: is 800 euros reasonable for this config, or is it on the high side?

Specs:

Intel Core i5-1135G7 (11th gen, 4C/8T)

32 GB Crucial DDR4-3200 (1 x 32 GB)

500 GB WD_BLACK SN850 NVMe SSD

13.5" 2256x1504 3:2 display, 60 Hz

Intel Iris Xe graphics, Intel Wi-Fi 6E AX210

Expansion cards:

3x USB-C

2x USB-A

1x DisplayPort

1x HDMI (Gen 1)

1x 250 GB Storage Expansion Card (Gen 1)

I'm planning to use the machine for my freelance work. Would I be better off with something like a used M4 MacBook Air or a ThinkPad X1 instead?


r/framework • • 1d ago

Question Any update on the Framework Oculink dock?

8 Upvotes

Eagerly waiting for one. If it is going to be delayed, can someone suggest me a best egpu that goes with framework 16 ryzen ai 300 laptop? Thanks :)


r/framework • • 1d ago

Community Support Advice on the Framework 12

5 Upvotes

Seriously considering a 12 but need some advice first.

I could do with a laptop, since I'm finding my current all-Android mobile device selection to be a problem.

I'm in the US but being British I need a UK keyboard layout for the far too often number of times I need the £ symbol (and the correct enter key layout). In 2026 that basically leaves Apple or Framework as the only options, unless I purchase one when I'm in the UK next... which will leave me with a UK based power brick, useless for 90% of the year. And UK purchases are a bit more expensive once the exchange rate is considered.

Whilst I'd prefer waiting until the backlit keyboard option is available I'm still tempted to buy now.

I have a 2230 SSD on order and already have suitable RAM (16GB, which whilst not ideal should be enough for the time being). 2 questions that aren't obvious to me from the website:

  1. Does the DIY option include a wifi card as standard?
  2. Is there a minimum for free shipping on marketplace orders?

    • I can't spec the exact items I want as marketplace and pre-order items can't be combined in a single order (and the 12 is considered pre-order). I don't mind placing a 2nd order at a later date for the items that aren't yet available (fingerprint sensor, since the Core 3 will be enough for me and that ships without it) but I can't find anything to indicate free shipping is available for parts/marketplace based orders or if shipping costs scale with the size/quantity of items ordered. I'd prefer to wait on ordering a power supply and stylus if that helps push me over the minimum threshold (for when the fingerprint sensor & backlit keyboard are available from the marketplace). But if shipping is chargeable regardless on marketplace orders then it makes sense to order everything I can up-front.

r/framework • • 1d ago

Linux Framework 13 Pro scaling options under Gnome

0 Upvotes

Hello,

Can I have screen shot of available scaling options for Framework 13 Pro with it's 2.8K (2880x1920) display under Gnome (eg Ubuntu 26.04 Gnome 50.1)?

I would like to use 1280px, so is there 225% ???


r/framework • • 1d ago

Question Any hints on updated versions of webcam and speakers

3 Upvotes

Framework 13 Pro is really nice, but webcam and speakers are _awful_. Are there any hints from FW team that they're going to update those parts? I'm almost able to justify the price gap, but without decent speakers I'm probably not going to buy this laptop for such a price tag.


r/framework • • 1d ago

Meme MACBOOK USER TRIES USING FRAMEWORK

0 Upvotes

Used windows for 5 years, then moved to macbook air, now moving to framework linux. Initial impressions.


r/framework • • 1d ago

Question Framework 13 Pro owners running Windows 11, how’s it been as a daily driver?

17 Upvotes

Hey everyone, I ordered a Framework 13 Pro and plan to run Windows 11 on it. I’m a cybersecurity engineering student, and I went with Windows because some of my classes and labs use Windows-specific software. I want to be able to follow along in class and get my work done without messing with workarounds. I can still run Linux in a VM when I need it for labs or projects.
My setup is a Ryzen 7 with 32 GB of DDR5-5600 (1×32 GB), and I’m planning to add a 1 TB Samsung NVMe SSD.
I’ll mostly be using VS Code, Docker, VirtualBox, and occasionally Android Studio with an emulator. Some days I’ll have two VMs running alongside VS Code. At home, I’m planning to use a dock with two external monitors.
For anyone running Windows 11 on theirs:
What kind of battery life do you get on a normal day?
How loud or warm does it get when running VMs or an emulator?
Have you had any issues with drivers, sleep, or docking?
If you started with one RAM stick and added a second, did you notice a difference in everyday use?
Curious what you’ve liked, what’s annoyed you, and whether you’d buy it again. Thanks!