r/gigabyte • • Sep 21 '26

Annoucements/Mod Post 📢 [PROMOTION] GIGABYTE Intel Motherboards + Free AAA Game

3 Upvotes

Planning an Intel-based PC build?

There's currently a GIGABYTE promotion that gives you a pretty nice bonus for choosing a qualifying GIGABYTE Intel Z890 or B860 motherboard.

Buy an eligible motherboard from Amazon.com during the promotional period and you can claim one free AAA PC game through the Intel Software Advantage Program.

And you get to choose your game:

  • Dying Light: The Beast
  • HITMAN 3
  • Sid Meier's Civilization VII

So the question is:

Which one are you picking?

The motherboard side of the deal covers all GIGABYTE Z890 and B860 motherboards, giving builders plenty of options depending on how they're putting their system together.

GIGABYTE's Z890 and B860 boards are built around Intel Core Ultra desktop processors and include features aimed at both gaming and enthusiast builds, including:

  • DDR5 memory support
  • PCIe 5.0 for graphics and NVMe storage
  • Advanced thermal designs
  • Premium power delivery
  • Wi-Fi 7 and 2.5GbE on select models
  • EZ-Latch features designed to make DIY installation easier

The promotion runs July 1 through December 31, 2026, so there's still plenty of time for anyone planning a new build.

The redemption process is:

1. Purchase an eligible GIGABYTE Z890 or B860 motherboard from Amazon.com.

2. Obtain your Intel Master Key.

3. Sign in or create an Intel Digital Hub account and redeem the key.

4. Choose one of the three available games.

5. Download and play.

One game per qualifying purchase, with additional eligibility and redemption requirements applying. Learn More HERE: https://www.aorus.com/en-us/explore/events/intel-unlock-one-game-2026

But let's make this a PC-building discussion:

If you were building a new Intel gaming PC today, which game would you choose as your freebie — and what CPU/GPU would you pair with the motherboard?


r/gigabyte • • May 09 '26

Annoucements/Mod Post 📢 [PRODUCT LAUNCH] Sharpen your Game with our Newly Launched GO27Q24G OLED Monitor!

2 Upvotes

The new GIGABYTE GO27Q24G is now available in North America, bringing next-generation OLED performance to competitive gamers who demand both speed and immersion.

Built around a 27” QHD 240Hz 3.5 Gen Glossy WOLED panel, GO27Q24G combines elite responsiveness with upgraded HDR brightness, enhanced motion clarity, and a completely redesigned borderless form factor engineered for focus.

Borderless Competitive Immersion

GO27Q24G introduces an exclusive 4-sided borderless OLED design that minimizes distractions and maximizes screen immersion. Combined with an ultra-thin 2mm metal base, the monitor delivers a cleaner desktop footprint while maintaining stability for competitive setups.

Display Specs:

  • 27-inch QHD (2560x1440)
  • 240Hz refresh rate
  • 3.5 Gen Glossy WOLED panel with MLA+
  • 0.03ms GTG response time
  • 99% DCI-P3 color coverage
  • Delta E <2 factory calibration
  • RealBlack Glossy coating with 1.1% ultra-low reflection

The result is a display that balances esports responsiveness with cinematic OLED image quality.

Brilliance Without Compromise

GO27Q24G upgrades to 3.5 Gen Glossy WOLED with MLA+ technology, enabling:

  • HDR Peak brightness up to 1300 nits
  • 1,500,000:1 contrast ratio
  • Improved highlight detail and HDR depth
  • Deeper blacks with enhanced perceived brightness

New HyperNits technology intelligently reshapes the EOTF brightness curve to improve luminance perception by up to 30% while preserving detail accuracy — helping solve the dim HDR limitations commonly associated with OLED gaming displays.

Engineered for Tactical Precision

GO27Q24G was designed specifically for fast-paced FPS gameplay and competitive responsiveness.

Gaming Features Include:

  • Ultra Clear motion technology for reduced motion blur
  • VRR Anti-Flicker optimization
  • Tactical Switch 2.0 for instant resolution switching
  • AI Picture Mode for automatic SDR enhancement
  • Adaptive sync support for smoother gameplay

Together, these features help maintain image clarity during rapid movement while reducing distractions caused by flicker or motion smearing.

Smart OLED Protection + 3-Year Warranty

To address long-term OLED reliability, GO27Q24G integrates:

  • AI OLED Care monitoring
  • Automatic pixel cleaning
  • Custom thermal solution with heatsink
  • APL Stabilizer
  • Fanless cooling design

Every GO27Q24G is backed by a 3-year warranty including burn-in protection, providing long-term confidence for daily gaming use.

Precision Without Borders.

Shop Now at Best Buy!: https://aorus.shop/GO27Q24G-BBY-R


r/gigabyte • • 19h ago

Discussion 💬 GeForce RTX 5080 GAMING OC 16G thermal gel replacement with Jarapad Extreme and PTM7950 [Guide]

Thumbnail gallery
17 Upvotes

I couldn't find a teardown and repaste guide for the RTX 5080 Gaming OC anywhere online, so I figured I'd share mine.
My 10-month-old GeForce RTX 5080 GAMING OC 16G started having issues with DLSS 5 with an increased power limit, so I decided to take the card apart, swap the thermal gel for Jarapad Extreme (UPSIREN Thermal Putty UTP-8), and use PTM7950 instead of paste. On the first boot, the hotspot is 14°C lower. As we all know, PTM gets even better after a few runs, so temps will drop even further.

A few takeaways:

  • The stock thermal gel definitely isn't some degrading goo that leaks oil (I have rev 1.0)
  • On about half the card, the stock gel was completely dried out and crumbly
  • Some components barely had any thermal gel on them
  • VRAM temps didn't drop with JARAPAD EXTREME putty under the backplate, so there's no point putting it there
  • I used around 60g of putty for the whole card, including the backplate

Here are a few pics—I definitely used way too much putty, though it doesn't hurt anything, and the PTM settled in nicely. As for the process, it took me around 2.5 hours. I worked my way through cleaning the whole card with isopropyl alcohol, blowing it out, and brushing away the crumbly gel residue with a small brush.

Tested in War Thunder with DLSS 5 and a 115% power limit.


r/gigabyte • • 3h ago

Is this supposed to happen?

Post image
0 Upvotes

hi, I just bought a Radeon RX 9060 XT, but there's an issue with the RGB lights for the name on the graphic card, I'm wondering if this is normal or is it a faulty one?


r/gigabyte • • 4h ago

Ecran noir Gigabyte RTX5090 Test HWMonitor, GPU-Z et OCCT, GPU 58° HotSp...

1 Upvotes

r/gigabyte • • 6h ago

Brand new gigabyte B850 AORUS ELITE WIFI7 not working ?

1 Upvotes

Yesterday I received a brand new B850 AORUS ELITE WIFI7 to replace an Asrock B650 steel legend wifi that was not working anymore.

I wanted to try to set the mobo with cpu (ryzen 5 9600x) and ram outside the case to see if everything was working great. So I setted up everything, plugged the 24pin from psu (MSI mag A850GL) to mobo, the 8 pin for the cpu. Installed the cpu and cpu cooler (artic), one stick of ram in A2, plugged DP cable from mobo to screen. But then I tried to power on by shorting the two pins of the front panel but nothing happened. No led either on cpu or dram. I know the board is getting power because when I plug my keyboard, the rgb ligths up. When i unplug the stick of ram, this time the dram ligth goes one.

I also tried to clear cmos by removing the battery and to flash bios by using the Q flash plus button and a usb drive. When I click on the Q flash plus button. Everything ligths up, the cpu cooler start spinning and the PSU fan also work, but after 5 second, the q flash plus led stop flashing and everything turns off.

Any Idea of what could be the issue ?


r/gigabyte • • 6h ago

Support 📥 PC immediately powers back on after shutdown/sleep in Windows, but works perfectly in Ubuntu. Even fresh Windows 11 and Windows 10 PE fail. Hardware or firmware?

1 Upvotes

Hi everyone,

I've been troubleshooting a very strange PC power-management issue for several days, and I'm hoping someone with experience in motherboard power circuitry, ACPI, or PSU troubleshooting might have some ideas.

The problem started immediately after a technician replaced my GPU and PSU and cleaned the inside of my PC. Everything worked normally before that.

I've tried multiple operating systems, clean Windows installations, different power configurations, and hardware isolation steps without finding the cause.

PC specifications

\- Motherboard: Gigabyte Z590 UD AC, BIOS F6 (2021)

\- CPU: Intel Core i7-11700KF

\- GPU: Gigabyte Radeon RX 9070 Gaming OC 16 GB (previously RTX 3060 Ti)

\- PSU: Enermax Revolution III 850W Gold (previously GameMax)

\- RAM: 32 GB DDR4 3200 MHz (XMP)

\- OS: Windows 11 Home 25H2

\- Storage: 256 GB SATA SSD (original Windows), 512 GB SK hynix NVMe (second Windows installation), 1 TB HDD

The problem

Whenever I shut down Windows, the PC completes the shutdown process normally. The fans stop, all lights go out, and approximately 0.1–1 second later, the PC turns itself back on, without anyone touching anything.

It's not just a Windows restart command. The PC physically powers off momentarily before starting again.

Sleep has the same issue. The PC enters S3 sleep, the fans stop, and it immediately wakes itself up.

Both issues are intermittent. Occasionally the PC shuts down successfully, but most attempts result in it powering itself back on.

I've attached a video showing this behavior.

Troubleshooting already performed

Windows and software tests

\- Normal Windows 11 shutdown — fails

\- "shutdown /s /t 0" — fails

\- Shutdown from Windows login screen — fails

\- Windows Recovery Environment → Turn off your PC — fails

\- Windows 11 installation USB → "wpeutil shutdown" — fails

\- Windows 10 installation USB → "wpeutil shutdown" — fails

\- Completely fresh Windows 11 Home installation on a separate 512 GB NVMe SSD — still fails

\- Disabled hibernation and Fast Startup using "powercfg /h off" — no improvement

\- Removed old NVIDIA drivers using DDU before installing AMD drivers — no improvement

\- Temporarily disabled device wake permissions — no improvement

\- Checked "powercfg /waketimers" and "/requests" — no active wake timers or requests

\- "powercfg /lastwake" generally reports an unknown source or no recorded source

The fresh Windows 11 installation uses a different AMD driver version from my original installation, but reproduces the same issue.

BIOS tests

\- Loaded BIOS Optimized Defaults — no improvement

\- "AC BACK = Always Off"

\- "Resume by Alarm = Disabled"

\- "Power On By Keyboard = Disabled"

\- "Power On By Mouse = Disabled"

\- "Soft-Off by PWR-BTTN = Instant-Off"

\- Temporarily enabled ErP — no improvement

\- Restored ErP to Disabled afterward

I haven't updated the BIOS yet. The board is still on F6 from 2021.

Hardware and peripheral tests

\- Disconnected USB peripherals — still happens

\- Disconnected Ethernet — still happens

\- Temporarily disabled Wi-Fi — still happens

\- Tried HDMI instead of DisplayPort — no improvement

\- Different DisplayPort cables and monitor — no improvement

\- Tried different external PSU power cables — no improvement

\- Bypassed the power strip and connected directly to the wall — initially seemed fixed, but the issue returned

The technician may have removed the front panel while cleaning the intake fans, although I don't know whether the Power-button wiring was touched.

The really strange part: Ubuntu works perfectly

I created an Ubuntu 26.04.1 LTS live USB and booted into Try Ubuntu without installing it.

I performed repeated shutdown and sleep tests.

Ubuntu shutdown: 6/6 successful.

Using:

"sudo systemctl poweroff -i"

The computer shuts down fully and stays off. I even repeated the test without removing the USB stick, and it still shut down successfully.

Ubuntu S3 sleep: 5+ successful attempts.

"cat /sys/power/mem_sleep" reports:

"s2idle \[deep\]"

Using:

"sudo systemctl suspend -i"

The PC enters sleep, remains asleep for over 60 seconds, and resumes normally when I press the Power button.

No unexpected wake-ups or restarts.

This is what I find so confusing: Windows 10 PE, Windows 11 PE, and two separate Windows 11 installations reproduce the problem, while Ubuntu handles both S3 sleep and S5 shutdown correctly.

Windows Event Viewer findings

A detailed event-log investigation showed:

\- Clean Windows shutdowns followed by fresh kernel boots, rather than ordinary software restarts.

\- S3 resumes occurring shortly after sleep entry, mostly with "Wake Source: Unknown".

\- Some Kernel-Power 41 events with Power-button timestamps, although these may be related to manual troubleshooting.

\- At least one Intel Wi-Fi-triggered S3 wake, but the immediate-wake problem also occurs when networking is disabled.

What hasn't been tested

\- Physically disconnecting the case "PWR_SW" connector and substituting the Reset switch.

\- Testing another known-good PSU with its own cables.

\- Inspecting motherboard power-button signaling and standby-power circuitry.

\- Updating the motherboard BIOS.

\- Performing a completely isolated Windows installation with all other drives disconnected.

Post has been made with ai's help because it can explain better what we have tried so far, the only remaining thing would be a full on reinstall of windows on my C: drive, but given we have already installed it on a separate disk, and it still has this behaviour i am not sure what to do anymore

UPDATE — I found a reproducible pattern involving AC power. Possible PSU standby-power or motherboard wake issue.

I made a significant discovery after further testing.

If I completely disconnect AC power before starting the PC, the next Windows shutdown succeeds. If I leave AC connected afterward, the next shutdown causes the PC to power itself back on.

Here's the exact sequence:

  1. With the PC off, I switch the PSU OFF, unplug the AC cable, wait approximately 5 seconds, reconnect AC, and switch the PSU back ON.
  2. I power on the PC and boot directly into the Windows 11 installation USB (WinPE).
  3. I open Command Prompt using Shift + F10 and execute "wpeutil shutdown".
  4. The PC shuts down completely and stays off.
  5. I manually power it on again WITHOUT switching off the PSU or disconnecting AC.
  6. I boot into the same Windows 11 USB environment and execute "wpeutil shutdown" again.
  7. The fans stop, but the PC immediately powers itself back on.

Repeating the AC-disconnection sequence restores the successful first shutdown.

I've reproduced this pattern multiple times, including on my clean Windows 11 installation on a separate NVMe SSD.

Ubuntu Live still behaves differently: six successful shutdowns and more than five successful S3 sleep/resume cycles.

The PSU is a recently installed Enermax Revolution III 850W Gold. The technician also suspects the PSU, although we haven't verified that it's defective.


r/gigabyte • • 6h ago

Support 📥 Slow boot when usb plugged into PD port [x870e Aorus Pro x3d]

1 Upvotes

Was wondering if anyone else has this problem (and hopefully a solution). When a usb device is plugged into the front panel usb pd port, the system hangs on boot for up to a few minutes (post code 99 super i/o initialization). It eventually boots, but takes forever. It's only the PD port though, no other usb ports cause this.

Anyone know if this is a known problem? Or is there a problem with my specific board?


r/gigabyte • • 10h ago

GIGABYTE AERO X16 1VH – Right-Side Fan Runs Continuously at Constant Speed Even at Idle and in BIOS | BIOS FB0A / EC F00A

1 Upvotes

Looking for other GIGABYTE AERO X16 owners experiencing similar fan behaviour or possible BIOS/EC fan-control issues.

1. Laptop Specifications

  • Model: GIGABYTE AERO X16 1VH
  • System SKU: EG61VH
  • Processor: AMD Ryzen AI 7 350 (8 Cores / 16 Threads)
  • Integrated GPU: AMD Radeon 860M
  • Dedicated GPU: NVIDIA GeForce RTX 5060 Laptop GPU
  • RAM: 32GB DDR5 (2 × 16GB Micron)
  • Memory speed: DDR5-5600 MT/s
  • SSD: GIGABYTE AG450E1024-SI (1TB)
  • Operating System: Windows 11 Home
  • BIOS Version: FB0A
  • BIOS Build Date: 28 May 2026
  • EC Firmware: F00A
  • GiMATE Version: 26.904.1.0

2. Power Adapter Specifications

Original FSP adapter supplied with the laptop:

  • Manufacturer: FSP
  • Model: FSP150-ACBS3
  • Output: 20V DC, 7.5A
  • Rated Power: 150W
  • Input: 100–240V AC, 2.0A, 50–60Hz

The adapter is rated for universal input voltage and is being used in India.

3. Description of the Fan Problem

I initially noticed the unusual fan noise immediately after connecting the charger for the first time.

The noise is a continuous, smooth airflow/whooshing sound rather than rattling, grinding or clicking.

Current fan behaviour:

  • The right-side fan starts immediately when I press the power button.
  • It continues running without interruption.
  • Its airflow and noise level remain almost constant.
  • The left-side fan also starts initially but stops after approximately three seconds.
  • The right-side exhaust produces considerably stronger airflow than the left.
  • The right-side fan does not noticeably change speed or noise between idle and demanding applications.

The same behaviour occurs:

  • On AC power.
  • On battery power.
  • Inside BIOS.
  • During Windows startup.
  • During normal idle operation.
  • Under heavy application workloads.

The fan noise is present even before Windows loads.

4. HWiNFO Temperature and Hardware Readings

Monitoring performed using HWiNFO64 v8.60-6120.

Representative readings from the latest screenshots:

SensorCurrentMaximum
CPU Tctl/Tdie36.9°C41.4°C
CPU Package Power7.32W18.26W
CPU SoC34.2°C36.0°C
AMD Radeon 860M32.9°C34.6°C
NVIDIA RTX 50600°C (inactive)37.1°C
SSD35°C36°C
DDR5 DIMM 037.2°C37.2°C
DDR5 DIMM 138.2°C38.2°C

Additional observations:

  • CPU Thermal Throttling (HTC): No.
  • CPU Thermal Throttling (PROCHOT): No.
  • Windows Hardware Errors (WHEA): 0.

Note: HWiNFO does not currently expose identifiable CPU/GPU fan RPM readings on my system, so I cannot confirm the actual fan speeds.

5. Troubleshooting Already Performed

I have already attempted the following:

  1. Tested with the original FSP 150W adapter.
  2. Disconnected the charger and tested on battery.
  3. Entered BIOS and confirmed the fan noise continues there.
  4. Performed an EC reset by holding the power button for more than 60 seconds.
  5. Kept the laptop completely switched off for approximately one week and restarted it. The issue remained unchanged.
  6. Checked ventilation openings for dust and obstruction.
  7. Tested on a hard, flat surface.
  8. Checked whether tilting the laptop changes the noise. It does not.
  9. Checked GIGABYTE GiMATE performance profiles, including Moderate, Game and Power Saving modes.
  10. Checked available BIOS menus for manual fan-curve or Smart Fan settings. No such option was identifiable.

None of these steps resolved the problem.

6. Questions for Other AERO X16 Owners

I would particularly appreciate responses from owners of the AERO X16 1VH and other AERO X16 variants.

  1. Does your right-side fan run continuously from the moment you power on the laptop?
  2. Does the left-side fan start briefly and then stop after a few seconds?
  3. Does your right-side fan maintain approximately the same noise level during idle and heavy workloads?
  4. Does the right-side fan continue running at the same speed inside BIOS?
  5. What BIOS and EC firmware versions are you running?
  6. Does GiMATE provide any actual fan-speed adjustment on your particular model?
  7. Can you see separate left/right fan RPM readings in HWiNFO?
  8. Have you experienced a similar issue after connecting the original charger for the first time?
  9. Has a BIOS update, EC firmware update or authorised service-centre intervention resolved this behaviour?

7. What I Am Trying to Establish

I am not assuming that the right-side fan is defective.

I would like to determine whether this behaviour is:

  • Normal independent operation of the two cooling fans.
  • An aggressive default fan-control profile.
  • An EC/BIOS firmware or fan-control issue.
  • A temperature-sensor or fan-controller problem.
  • A physical issue with the right-side fan assembly.

Since the laptop is relatively new, I would prefer to identify whether this is a known firmware or hardware issue before attempting any repairs.

Any feedback from actual AERO X16 owners, especially those with the Ryzen AI 7 350 configuration and BIOS FB0A, would be greatly appreciated.

Thank you!


r/gigabyte • • 10h ago

SOLUTION: Gigabyte B650 Gaming X AX V2 and Ryzen 9700X - DRAM light stays lit, won't POST

1 Upvotes

Hi all,

I had an issue with my recent PC build that I figured out how to fix, so I figured it might be helpful to post the solution. I have seen other posts with similar solutions, but were missing steps or fine details -- so hopefully this is useful.

The Problem

The issue I ran into is when I turned the new PC on, the CPU LED would light briefly, then the "DRAM" LED on the motherboard would stay lit. The fans would be on, but the PC would not boot or even POST. After approximately 2 minutes, the PC would restart itself and the same thing would happen.

Thinking that the issue was bad RAM, I tried reseating it, or putting only one stick at a time into the correct slot, with no success.

The Solution

The Gigabyte motherboard has an incompatibility with either the CPU or RAM that can be solved with a firmware update (the more recent firmware update F31 briefly describes fixes for RAM compatibility and Ryzen 9000-series fixes). You can use the motherboard's "Q-Flash Plus" feature to update the bios even though it cannot boot. You do not have to disassemble your computer in order to do this -- but you will need a working PC in order to do the prep.

  1. Download the latest firmware from Gigabyte's website. For my motherboard I went here but obviously pick the motherboard that exactly matches the one you have (including "Rev" version): https://www.gigabyte.com/Motherboard/B650-GAMING-X-AX-V2-rev-1x/support#support-dl-bios . Choose a version that does not end in a or b (such as F32a or F32b) -- these are alpha and beta versions, which may come with bugs.
  2. Extract the .zip file you downloaded. There will be a file that is larger than the others (such as B650GAMINGXAXV2.F31). This is the file that will be used to update the motherboard's bios; the other files aren't important in this case.
  3. Copy the B650GAMINGXAXV2.F31 file to a FAT32 formatted USB stick, and then rename the file to GIGABYTE.bin and be sure to capitalize the GIGABYTE part (it may be ok to have it lowercase but I was not able to test that).
  4. Plug the USB stick into your Gigabyte motherboard. There is a specific USB port you need to plug into called "BIOS USB", be sure to plug into the correct port.
  5. Make sure your power supply is plugged in (and if needed, the power supply switch on) but do not press the power button to turn your computer on. Instead, use a paperclip to press in a tiny button called "Q-FLASH PLUS" near the USB ports/Ethernet port on the motherboard.
  6. The PC will turn on after you press that Q-FLASH button. A hard-to-see flashing light next to the "Q-FLASH PLUS" button will blink to tell you that it's working. Do not power off the PC unless this light has stopped blinking.
  7. The PC will reboot by itself when it's done, and the "Q-FLASH PLUS" light will stop blinking. If you don't have a monitor plugged in to your video card, the "VGA" light may illuminate. If so, that's ok, shut down the PC, plug in a monitor, and when you turn on your computer, it should POST (and possibly boot if you have a working OS) with no motherboard warning lights (the "BOOT" light may stay on if you have no OS installed)!
  8. Celebrate!

Here are the relevant components I'm using:

* Gigabyte B650 Gaming X AX v2 rev 1.0

* AMD Ryzen 7 9700X

* G.Skill Flare X5 Series 48GB DDR5-5200 (two 24GB sticks)

* Cooler Master Hyper 212 Spectrum V3

Edited to change the bios version to the non-alpha one, mentioned the possibility of naming GIGABYTE.bin in lowercase.


r/gigabyte • • 1d ago

RTX 3090 Ti showing millions of OCCT VRAM errors, but Gigabyte says it passed 20 hours of stress testing – what should I do?

Thumbnail gallery
23 Upvotes

Hi everyone,

I have a GIGABYTE RTX 3090 Ti Gaming OC 24GB (GV-N309TGAMING OC-24GD) with the following issues:

  • Red and green pixel artifacts appearing in games.
  • OCCT VRAM test reporting millions of errors.
  • The issue was reproducible, and I documented the errors with screenshots.

I submitted the card to GIGABYTE Germany for RMA and provided them with the OCCT results and pictures of the artifacts.

Their response was that they only use FurMark, Unigine Heaven and 3DMark for their internal stress testing. They claim the GPU was tested under load for 20 hours and worked flawlessly throughout the entire testing period.

They did not mention performing any dedicated VRAM test.

They have now returned the card and recommend that I test it again in my own system and check whether the problem persists.

My questions:

  1. Is it possible for a GPU to pass 20 hours of FurMark, Heaven and 3DMark while still having defective VRAM?
  2. Can OCCT detect memory errors that these benchmarks might not reveal?
  3. Has anyone experienced a similar issue with a GIGABYTE RTX 3090 Ti or their RMA department?
  4. If the same VRAM errors and artifacts return, what would be the best way to proceed with GIGABYTE?

I would appreciate any technical insight or advice from people who have dealt with similar cases.

Thanks!


r/gigabyte • • 12h ago

Discussion 💬 New B850M C motherboard question

1 Upvotes

I just got my new prebuilt today, that has a gigabyte B850M C motherboard, it only came with a 1tb ssd and I want to add another. My understanding is that there are 2 other M.2 slots one of the front under the GPU and another on the back of the motherboard. Is it relatively straightforward to remove the GPU put a new ssd in? I am very new to working on pcs at all so any help would be appreciated


r/gigabyte • • 14h ago

SOLUTION: Gigabyte B650 Gaming X AX V2 and Ryzen 9700X - DRAM light stays lit, won't POST

1 Upvotes

Hi all,

I had an issue with my recent PC build that I figured out how to fix, so I figured it might be helpful to post the solution. I have seen other posts with similar solutions, but were missing steps or fine details -- so hopefully this is useful.

The Problem

The issue I ran into is when I turned the new PC on, the CPU LED would light briefly, then the "DRAM" LED on the motherboard would stay lit. The fans would be on, but the PC would not boot or even POST. After approximately 2 minutes, the PC would restart itself and the same thing would happen.

Thinking that the issue was bad RAM, I tried reseating it, or putting only one stick at a time into the correct slot, with no success.

The Solution

The Gigabyte motherboard has an incompatibility with either the CPU or RAM that can be solved with a firmware update (the more recent firmware update F31 briefly describes fixes for RAM compatibility and Ryzen 9000-series fixes). You can use the motherboard's "Q-Flash Plus" feature to update the bios even though it cannot boot. You do not have to disassemble your computer in order to do this -- but you will need a working PC in order to do the prep.

  1. Download the latest firmware from Gigabyte's website. For my motherboard I went here but obviously pick the motherboard that exactly matches the one you have (including "Rev" version): https://www.gigabyte.com/Motherboard/B650-GAMING-X-AX-V2-rev-1x/support#support-dl-bios . Choose a version that does not end in a or b (such as F32a or F32b) -- these are alpha and beta versions, which may come with bugs.
  2. Extract the .zip file you downloaded. There will be a file that is larger than the others (such as B650GAMINGXAXV2.F31). This is the file that will be used to update the motherboard's bios; the other files aren't important in this case.
  3. Copy the B650GAMINGXAXV2.F31 file to a FAT32 formatted USB stick, and then rename the file to GIGABYTE.bin and be sure to capitalize the GIGABYTE part (it may be ok to have it lowercase but I was not able to test that).
  4. Plug the USB stick into your Gigabyte motherboard. There is a specific USB port you need to plug into called "BIOS USB", be sure to plug into the correct port.
  5. Make sure your power supply is plugged in (and if needed, the power supply switch on) but do not press the power button to turn your computer on. Instead, use a paperclip to press in a tiny button called "Q-FLASH PLUS" near the USB ports/Ethernet port on the motherboard.
  6. The PC will turn on after you press that Q-FLASH button. A hard-to-see flashing light next to the "Q-FLASH PLUS" button will blink to tell you that it's working. Do not power off the PC unless this light has stopped blinking.
  7. The PC will reboot by itself when it's done, and the "Q-FLASH PLUS" light will stop blinking. If you don't have a monitor plugged in to your video card, the "VGA" light may illuminate. If so, that's ok, shut down the PC, plug in a monitor, and when you turn on your computer, it should POST (and possibly boot if you have a working OS) with no motherboard warning lights (the "BOOT" light may stay on if you have no OS installed)!
  8. Celebrate!

Here are the relevant components I'm using:

* Gigabyte B650 Gaming X AX v2 rev 1.0

* AMD Ryzen 7 9700X

* G.Skill Flare X5 Series 48GB DDR5-5200 (two 24GB sticks)

* Cooler Master Hyper 212 Spectrum V3

Edited to change the bios version to the non-alpha one, mentioned the possibility of naming GIGABYTE.bin in lowercase.


r/gigabyte • • 15h ago

I replaced my SATA M.2 SSD with an NVMe SSD, but the BIOS couldn't detect it. When I switched back to my old SATA SSD, the BIOS still couldn't detect it either. Can anyone help me with this issue, please?

Thumbnail reddit.com
1 Upvotes

r/gigabyte • • 1d ago

Gigabyte support is useless: I showed them the exact bug in their BIOS, they ignored it, so I fixed it myself [Call of Duty failed attestation]

33 Upvotes

My Gigabyte TRX40 DESIGNARE fails Call of Duty's TPM attestation ("Failed attestation") even with Secure Boot and the TPM on. The reason is a bug in Gigabyte's BIOS: the firmware never reports the Secure Boot state to the TPM.

I found the exact cause, a single wrong byte in the TPM module (0x17 should be 0x07), and sent Gigabyte the module, the offset and the fix.

Their response:

- They sent me a BIOS for the wrong board revision.

- Then a "new" BIOS with the bug still in it.

- Then a generic checklist: "reinstall the game, reinstall Windows".

- Finally: "No incompatibility on Gigabyte's part, contact Microsoft."

So I patched the byte myself and flashed it. Call of Duty works now.

Three weeks of tickets, and the fix was literally one byte, which I handed to them. If you own a Gigabyte TRX40 board and COD says "Failed attestation", it's not your setup, it's their BIOS. Don't expect support to help.

Here are the details on the bug and how it was fixed:

Cause: In the AMI module Tpm20PlatformDxe (GUID 0718AD81-F26A-4850-A6EC-F268E309D707), the function that measures Secure Boot calls gRT->QueryVariableInfo() with Attributes = 0x17 (instruction at RVA 0x14FC). The value 0x17 contains the deprecated bit EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS (0x10). Your NvramDxe rejects this with EFI_UNSUPPORTED on UEFI 2.70, so the function returns before measuring SecureBoot, PK, KEK, db and dbx.

Proposed fix: Call QueryVariableInfo() with Attributes = 0x07 (NV | BS | RT) instead of 0x17. Alternatively, do not abort the measurement when QueryVariableInfo() fails.

Proof: I changed only this one byte, 0x17 → 0x07, in your official FEh BIOS and flashed it. The decompressed firmware differs from the original in that byte only. The result:

- PCR7 now contains the complete sequence: SecureBoot, PK, KEK, db, dbx, separator, db authority. This is the sequence that Microsoft and the TCG specification require.

- tpmtool getdeviceinformation now reports "PCR7 Binding Possible" instead of "Not Possible".

- Call of Duty TPM attestation now passes. It failed with every official BIOS: F7g, FEg and FEh.

That is also the exact detail I sent to the support, and they answered it's Microsoft's fault. ¯_(ツ)_/¯

EDIT:

I already posted this, but my post got removed, probably for containing a Mega link that provided BIOS versions where the bug is fixed.


r/gigabyte • • 16h ago

Quick questions for anyone with the gigabyte 5090 gaming OC and wire view pro.

Thumbnail reddit.com
1 Upvotes

r/gigabyte • • 17h ago

La opción Re-Size BAR no aparece en la BIOS.

Thumbnail reddit.com
1 Upvotes

r/gigabyte • • 1d ago

Discussion 💬 Does a Gigabyte AORUS GeForce RTX 5080 MASTER ICE 16G - leak goo when vertically mounted ?

Post image
0 Upvotes

YES ANOTHER ...

  • Does a Gigabyte AORUS GeForce RTX 5080 MASTER ICE 16G - leak goo when vertically mounted ?

I keep hearing it has issues and I'm about to pay 2k for a card which i'm planning on vertically mounting / angled mounted in a thermaltake 600 case.

Honestly I cannot believe this is a real issue or was it an issue on early cards?

And if so what is being done about it or do gigabyte recommend their flagship 2k card is only mounted in 1 way... :?

Thanks :-D

UPDATE: thank you for help. It seems that its a crap shoot and the new cards are def less likely to drip and at a partial incline will slow down any issues.


r/gigabyte • • 1d ago

Updated the Gigabyte control center to 26.10.21.01 and now my ram won’t change colors, it’s just staying rainbow. How do i fix it? I’ve already uninstalled and reinstalled the app, as well as did a power drain on my pc.

1 Upvotes

r/gigabyte • • 1d ago

Temps are consistently fluctuating 5080 aero

1 Upvotes

I got a 5080 aero sff and performance wise it’s great! Hitting 9930 points with UV/OC at 350 watts but I noticed that temperatures keep fluctuating constantly and I was wondering if that’s normal.


r/gigabyte • • 1d ago

Support 📥 Gigabyte G6 MF 2024

Post image
1 Upvotes

I keep getting Bsods of all types, keyboard and mouse sometimes works, sometimes fails. Visited service center Mumbai 4 times. They said no issues. They said issues seen in even logger is ok. They said software issue nothing we can do. 2 times i visited suprisingly my laptop behaved well exactly those days. Can someone help me? Linux is good but i cant use it. Already updated all drivers. Even deleted GCC. Did whatever chks google said. Please help me out😭. This is just a year old already replaced battery and ssd.


r/gigabyte • • 1d ago

Support 📥 SUDDEN: 5 beeps on start - no display (monitor works) - overnight, build 5 years old

1 Upvotes

Hello Guys and Gals,

As in the topic: I've been using the same build for 5 years, no issues, two days ago it started to beep 5 short times on start-up and no display. I added a network PCI card two weeks ago but that's the only thing that has been changed recently.

Monitor works - I plugged it into my laptop and it worked just fine. I have been using HDMI.

I have tried the solution with:

  • turning monitor on before turning on the PC,
  • waiting 5 mins or so,
  • re-plugged RAM,
  • checked all the plugs on motherboard if they are good,

nothing worked ofc.

I seriously doubt it is a CPU error as this is not a new build, but all the simple solutions do not work.

Should I see a specialist with it?

Motherboard: Gigabyte B560M DS3H


r/gigabyte • • 1d ago

Gigabyte H610M K V2 vs rtx 5060ti

2 Upvotes

I've been having a strange issue with my RTX 5060 Ti. The screen would randomly go black while the PC was still running, with all the fans and RGB lights on. The weird part was that it mostly happened when the PC was idle. Gaming and GPU stress tests were completely fine.

Initially, I thought it was an NVIDIA driver issue. Tried different driver versions, disabled Fast Startup, changed display settings, and even updated my Gigabyte H610M K V2 BIOS to F10. Nothing really helped.

Event Viewer kept showing nvlddmkm Event ID 153 (BusReset TDR) and WHEA 17 errors.

After digging deeper with PowerShell, I found that the WHEA errors were coming from the Intel PCIe root port connected to the GPU. The error status was 0x1, indicating a PCIe Receiver Error.

Finally, I went into BIOS and changed the PCIe setting from Auto to Gen 3. I also disabled PCIe Link State Power Management in Windows.

So far, over 8 hours without a single black screen, NVIDIA TDR, or unexpected restart.

I'm still getting occasional WHEA 17 corrected errors, so I wouldn't say the issue is completely fixed. But at least the PC is running normally now.

Looks like something isn't happy with the PCIe connection at higher speeds. Still not sure whether it's the motherboard or GPU.


r/gigabyte • • 1d ago

Support 📥 Cant find resizable BARA

1 Upvotes

Ive turnd csm support off, turned on above 4g decoding, and reset. I cant find the setting anywhere

My model name is: B365M DS3H WIFI and the version is F2b