Hi all. A while back I shared EQ, a small free equalizer for everything your Mac plays. A few of you said the hard part isn't the EQ, it's knowing *where* to cut. Fair.
So 0.6 has a sweep. Turn on **Sweep** and a soft sine tone glides from low to high through the EQ, in place of your music. The curve shows where it is. When something rings or stabs, that's your spot. Drop a narrow cut there and sweep again to check it's tamed.
It's nothing a measurement mic and REW can't do better. It's just handy when you don't have one, or want a quick check by ear.
**The details**
- Logarithmic or linear, any range from 20 Hz to 20 kHz, up or down
- 0.5 to 15 seconds, at −48 to 0 dB
- Plays through your current EQ, so the second pass shows whether the cut worked
- Stops by itself, and your audio comes back
Also new: bands are listed low to high, a few graphic-mode fixes, and the window has a bit more room.
**Please keep the level low.** Start around −24 dB. A resonance can be a lot louder than the rest of the sweep, and high frequencies are the ones that hurt.
**What EQ is, if you're new**
Up to 16 parametric bands or a graphic EQ, AutoEq import, a curve per output, and a limiter so boosts don't distort. No driver: it uses the audio tap built into macOS 14.2+. Free and open source (GPL-3.0), no account, no network connections.
**Honest caveats**
- Not notarized, so macOS asks you to click Open Anyway the first time. Releases are built by GitHub Actions from the public source, with a SHA-256 checksum.
- macOS calls the permission "System Audio Recording". Nothing is recorded or saved.
- Built with AI coding tools, tested on my own M4. The Intel build is untested, so a report would be lovely.
Download: https://github.com/dylenq/macos-parametric-eq/releases/latest
Source: https://github.com/dylenq/macos-parametric-eq
If you give it a go, I'd love to know where your peak turned out to be, and what's confusing or missing.