r/Knife_Swap • • 6d ago

Still Available / Price Check Thread

4 Upvotes

This is the official Still Available / Price Check Thread for r/knife_swap! The rules are simple:

List what specific items you have available and their prices

Link to the original post with the timestamp

There is no price penalty and may post your listing or what you have not sold here at any time following a listing

If you'd like to ask for a price check, start the comment with a bolded [PRICE CHECK] and then list the item, condition, and any pictures if you have them

Be careful


r/Knife_Swap • • 6d ago

Want to Buy Thread

7 Upvotes

This is the official [WTB] thread for /r/knife_swap! The rules are simple:

List what specific items you want, the more info the better

List what you have to offer

This is not a sales thread

As always be careful

ALWAYS ASK SELLERS TO REPLY TO YOUR WTB COMMENT TO VERIFY THEIR FLAIR BEFORE YOU PAY THEM, IF THEY MAKE ANY EXCUSES ON WHY THEY CANNOT COMMENT THEY ARE SCAMMERS


Swaps made in the WTB thread can be confirmed here. Click here to learn more.

Reference the Universal Scammer List here: https://universalscammerlist.com/search.php


r/Knife_Swap • • 2h ago

Machinewise Mojave and Skelly Sparrow Knife Co Strix S90V Beauties!

Post image
17 Upvotes

Timestamp and relevant photos: https://imgur.com/a/QwEWLDu

Two for sale tonight:

  1. Machinewise Mojave in S90V

I’m probably the second owner- this was lightly carried- it had a couple of light scratches on the clip. I gave it a fresh vapor hone to remove those.

Great action and centering.

DOES NOT COME WITH BOX OR COA, comes in a generic pouch.

The tip on this isn’t the crispiest- it does look like a factory unused edge but I think it might benefit from a sharpen if it bugs you. Not an issue just something to note.

This is #1040 in the production run.

Video: https://photos.icloud.com/shared/album/009CjMMLIcB687wgsb2j-G_1Q

Asking price is $615 shipped OBO

2. Sparrow Knife Co Strix

I am technically the first owner- sold it to a friend and bought it back so… first second first owner?

He flicked it on the couch- I opened an Amazon envelope with it.

It’s in very good condition. Perfect action and centering. Comes with box and documents.

This is S90V and #65 of the production run.

Only thing to note is one small bare metal spot on the side of the clip visible in the right light.

Video: https://photos.icloud.com/shared/album/070FOxLKuubn7Fe50md4dKbeg

~~Asking price is $425 OBO~~

I would love to trade but I got hit with extra bills this month (and purchased a manual mill) so no trade offers please.

If any of these need to be customized further to your taste- I’d be happy to do so for a negotiated fee. You can see more of my work here Valley Bladeworks


r/Knife_Swap • • 3h ago

Sold/traded 🔥🔪 [WTS] CRK Sebenza 31 Exclusives – Rare NWK OD Green Large & Glass Blasted BladeHQ Carbon Fiber Small 🔥

Thumbnail
gallery
12 Upvotes

Two beautiful Chris Reeve Sebenza 31 dealer exclusives up for grabs today! Both knives are in excellent condition, and I'm the second owner of each. Moving these along to make room for another CRK acquisition.

🪖 1. CRK Large Sebenza 31 – Rare NWK Exclusive OD Green / Black Micarta

Up first is a rare and highly sought-after Chris Reeve Large Sebenza 31 Northwest Knives Exclusive, featuring the distinctive OD Green Cerakoted titanium scales with contrasting black Micarta inlays.

These NWK exclusives are not something you see come up for sale every day, especially in the desirable OD Green configuration. The combination of the military-inspired finish, black Micarta inlays, and legendary Sebenza craftsmanship makes this a standout piece for any CRK collector.

I'm the second owner, and the knife is in excellent condition. A fantastic opportunity to add a harder-to-find dealer exclusive to your collection!

🔪 Knife Details

  • Model: Chris Reeve Large Sebenza 31
  • Exclusive: Northwest Knives (NWK)
  • Handle: OD Green Cerakoted Titanium / Black Micarta Inlays
  • DOB: July 31, 2023
  • Ownership: Second Owner
  • Condition: Excellent
  • Lockup: Excellent, solid and secure
  • Centering: Excellent, blade is nicely centered

💰 SV: $650 SOLD SOLD SOLD

💎 2. CRK Small Sebenza 31 – BladeHQ Exclusive Carbon Fiber / Glass Blasted

Next up is a gorgeous Chris Reeve Small Sebenza 31 BladeHQ Exclusive, featuring beautiful carbon fiber inlays paired with CRK's premium glass blasted titanium finish.

The glass blasting gives the titanium a smoother, more refined appearance and provides a beautiful contrast against the carbon fiber inlays. It's a fantastic combination that elevates the already clean and timeless Sebenza design.

I'm the second owner, and this one is also in excellent condition. The only thing worth mentioning is some minor anodizing wear on the thumb stud from opening the knife. Otherwise, it presents beautifully.

The original lanyard has been untied and is included in the box.

🔪 Knife Details

  • Model: Chris Reeve Small Sebenza 31
  • Exclusive: BladeHQ Carbon Fiber
  • Handle: Glass Blasted Titanium / Carbon Fiber Inlays
  • Finish: Glass Blasted
  • DOB: April 8, 2026
  • Ownership: Second Owner
  • Condition: Excellent
  • Lockup: Excellent, solid and secure
  • Centering: Excellent, blade is nicely centered
  • Notes: Minor thumb stud anodizing wear from opening; untied lanyard included in box

💰 SV: $550 SOLD SOLD SOLD

📦 Shipping & Payment

  • Shipping: USPS Priority, CONUS
  • Payment: Zelle (preferred) or PayPal Friends & Family – NO NOTES
  • Priority: 🏆 YOLO > Chat

Both knives are excellent examples of CRK dealer exclusives and ready for their next home.

Thanks for looking! Feel free to reach out with any questions or requests for additional pictures.


r/Knife_Swap • • 38m ago

(WTS) Eutsler DUKling, McGinnis EH, RJ Cedar Mini, Patrick Martin M Sentinel

Thumbnail
gallery
• Upvotes

No trades at this time, sorry. PPFF preferred.

VIDEOS FOR ALL FOUR: https://imgur.com/a/ueCOp9h

Eutsler DUKling - SV625

No COA, BGM regrind with some snails and wear. On thick skiff washers with Magnacut and starburst scales. Timascus lugs. Has been sharpened and I’m at least 4th owner. Lock up is good, blade is centered and no blade play. Detent on the lighter side. PO said that it’s possible there are 2 different screws used for clip. I’ve never taken apart to confirm but there’s no play in the clip at all. No cut or carry by me but assume there’s some with POs. Comes in generic taco. Snappy open. Finger close (not shake shut currently).

Rob Johnsons Cedar Mini #31 - SV675

Third owner. DOB 3/26/26. Vanax steel w bronze hardware and Ti scales. Beautiful knife in great shape. No cut, carry, or sharpened reported. No snails or other blemishes that I can see. Centering is great and lockup is solid. Medium light detent. No mods or disassembly. Drop shut. Comes w COA and box.

Patrick Martin M Sentinel #17 - SV 1,000

Second owner. Chad Nichols Mosaic Damascus steel. Ti hardware and scales. No cut or carry reported and blade is unsharpened. No blemishes that I can see. No mods. No disassembly. Blade is centered and lockup is good at ~25%. I love this knife size for edc. Action is snappy and close is light shake shut. Comes w COA and box. DOB 6/16/26. Detent is medium on this one.

McGinnis Extreme Hunter - SV 2,100

Multiple owners. I would assume it’s been sharpened before though blade is in great shape. These don’t have COA but this appears to be from 2022 as etched inside backspacer. Very snappy open. Blade is centered. Lockup solid at 40%. I cannot say for fact what blade steel is, sorry. PO was unaware as well. Close is more finger shut. I’ve not carried or cut but assume POs have. No disassembly by me or PO. Comes in generic taco.


r/Knife_Swap • • 38m ago

Sold/traded [WTS] Hinderer XM 3" fullered spear point user

• Upvotes

Got a rare one today, user Hinderer XM 18 3" fullered blade. Didn't think I would sell this but hasn't seen much pocket use for a whole so moving it along. Is plenty sharp I sharpened it a few times over the time I owned it. Has seen lots of use as you can see on the video.

Specs

Black g10

Blade steel m390

Currently on skiff ceramic bearings

MXG deep carry pocket clip

Includes the original hardware, box, pocket clip and peanuts as well

Asking $250 shipped.

https://imgur.com/a/0Yunf45


r/Knife_Swap • • 8h ago

Sold/traded [WTS] Oz Rosie, Little John & MW Sonora

Post image
21 Upvotes

Told myself I wasn’t going to sell my FCFS Rosie from a couple months back, but I need to let it go. It’s time…

not looking for trades

BNIB Oz Roosevelt #5460 - Dark Stonewashed S45VN Steel/Stonewashed (Mirror-Like) scales/Clip/BS
Video: https://photos.icloud.com/shared/album/0cfxZ2kFc16YHkIsFqvpTlxQA
First owner
Factory edge
No cut/carry - has remained a Pouch Princess since purchased
No disassembly
Perfect Oz Action with that double detent, amazing!
Centered
Zero marks or issues of any kind
-800$SOLDPayPal FF/Venmo Shipped CONUS

BNIB Oz Little John - Stonewashed with Gold Ano Oz Grip
Video: https://photos.icloud.com/shared/album/05cfO04Nnn2PlTtFKKYWur7Hg
Never used
-200$SOLDPayPal FF/Venmo Shipped CONUS

BNIB MachineWise Sonora #2357 - S90V Stonewashed Steel/Raw Ti Stonewashed Streamline with blue Topo laser engravings
Video: https://photos.icloud.com/shared/album/062P4ZrQ_Fuans6TM7sm4eiEA
First Owner
Factory edge
No cut/carry
No disassembly
Perfect detent and action
Centered
-600$SOLDPayPal FF/Venmo Shipped CONUS


r/Knife_Swap • • 9h ago

[WTS] Mini Taipan, Pm2 S45vn, Kansept Loki S35vn

26 Upvotes

PayPal F&F or Zelle ships via USPS US only

Mini Taipan: Second owner. It is a catch and release, I wanted to try it out and it is a sweet knife. I am definitely going to look out for the regular one. The previous owner sanded some spots and gave it an acid wash, he also sharpened the blade and it is still sharp. Good centering and lockup. SV:$115 SOLD

PM2: Second owner. It is a user but has plenty of life left, the blade and pocket clip have some scratches and it is dressed with purple G10 scales and a blue glow-in-the-dark shredded carbon fiber backspacer. Blade has been sharpened 17° and still razor sharp. Centered and good lockup SV:$110

Loki: Second owner. Its a user but has plenty of life left. I bought it as a project, but for some reason, there's vertical play I took it apart and anodized it, and the blade has been sharpened by the previous owner, though it has three tiny chips that I tried to show in the video. Centered and lockup has vertical play. SV:$60


r/Knife_Swap • • 4h ago

[WTS] Pro tech Runt 5 custom, ATCF custom 003, Spyderco leaf jumper & tenacious, WE shadowfire, & Alliance mini slim pickins

Thumbnail
gallery
8 Upvotes

Bear with me on this long post lol. No trades just want to sell at this time. All of these come with there respective box/pouch.

Protech Runt 5 custom .003 ——> $300 SOLD ❌
Second owner. 20cv steel. Pearl button. No cut or carry it’s mint. Fires hard and lockup/centering great.

https://flic.kr/p/2sNKVWg

Protech 2024 ATCF custom 003 —->$550 SOLD ❌
Second owner. No cut or carry from either of us. This model features the Mike Irie mirror polished blade in magnacut. Fires hard and lockup/centering are great.
Blade has some faint scratch lines where the grinds meet in certain lighting. See vids
https://flic.kr/p/2sNKTQN

https://flic.kr/p/2sNKfEJ

Spyderco Leaf Jumper k390 —-> $225
2nd owner of scales and clip. 3rd on the blade. Has been reported as no cut or carry and I have cut a package or two open and carried around the house the last few days.
K390 steel in plain edge which has been harder and harder to find. It’s rocking some RC blade works scales and a lynch milled fluted clip. Comes with the stock scales and clip also. Lockup is great and centering is ever so slightly off. See vid

https://flic.kr/p/2sNfGQK

Spyderco tenacious M4—-> $100 SOLD❌
2nd owner of this one. M4 steel. No cut or carry by either of us. Lockup and centering are on point.

WE knife shadowfire ——> $180
At least the 3rd owner. 20cv blade. Has been carried and cut with. Love to flip this one it’s action is phenomenal. Centered and lockup is great. See video for overall wear

https://flic.kr/p/2sNLeak

Alliance designs mini slim pickins ——>$169
Multiple owners. Elmax steel. Has been carried and cut with. Slight chip in the blade towards the tip that should be easily sharpened out. Scales have been rounded and thumb studs added. The most fidget friendly knife I’ve owned. Centered and locks up great. See vid for snails and overall condition.

https://flic.kr/p/2sNKWBK

CONUS
PayPal F&F or Venmo me


r/Knife_Swap • • 2h ago

WTS 2 Spyderco Para 3s: S35VN Sprint and SPY27 LW

Thumbnail
gallery
6 Upvotes

Most payment methods are fine

$155 $140 S35VN Brown G10- 2nd owner, a few light scratches on blade near tip, nothing notable on the G10. I’d assume light cut and carry by previous owner. Edge appears factory. Comes with box. This is a distributor exclusive for Moteng from 2018.No blade play up down left or right. Centered. No lock stick.

$95 SPY27 LW- 2nd owner catch and release. Brand new except for one stripped pocket screw(replacement in box). No cut carry or sharpen. Decent centering for a lightweight. Small amount of side-to-side blade play. Okay action. Little to no lock stick.


r/Knife_Swap • • 5h ago

WTS Spyderco PM2 BHQ Exclusive/ PM2 Titanium Frag Scales/MachineWise Sonora Pocket Clip/ Citizen Promaster Dive

Thumbnail
gallery
8 Upvotes

limited exclusive run diamond mesh jade G10
Magnacut
2nd owner
Has been sharpened once at 17 DPS and is currently SHARP
Has been cut and carried
There are a couple of microscopic dots on clip side of blade that can only be seen at a certain angle( see pics)other than that it’s like new
Action, lock up, and centering all good
No box/paperwork NOT a factory second
154 PPFF shipped conus SOLD

Scales show signs of wear. Unknown manufacturer I bought a knife that had these on it.
20 PPFF shipped conus SOLD

MachineWise Sonora pocket clip like new
25 PPFF shipped conus

Citizen Promaster Dive
Only blemishes of note are a few scratches on the green bezel
Keeps great time and the glow is some of the best in the game
No box
125 PPFF shipped conus


r/Knife_Swap • • 7h ago

Spyderco, Microtech, Vero Engineering, Kershaw, Kizer, EDC bundle

Post image
14 Upvotes

Good afternoon swap, got a good bit of a collection clear out

https://imgur.com/a/uAJoiP7

---]Spyderco Manix 2, Magnamax, $265

---first owner, cut, carried, never sharpened honed or stropped. It was my experiment to see how long I could make magnamax go, finally started tearing paper, so it could use a sharpen but I never did. Centering is good, comes with box original scales clip and hardware, all those parts were never carried disassembled day 1 upon opening. All upgrades except clip are Flytanium, scales hardware ball cage, clip screws are a different color because a Para3(I don't have anymore) needed longer screws. Clip is LynchNW Para3 right hand I believe, I known its Lynch just don't remember which one

---]Spyderco Paramilitary 2, S110V, $135

---standard blurple S110V, 2nd owner cut carried sharpened never disassembled centering is good, very small chip near the choil, clipped a staple or something not sure, drops shut. Will come with Flytanium jade scales, never got around to putting them on

---]Spyderco Paramilitary 3, Cru-wear, $125 SOLD SOLD SOLD

---never cut carried or sharpened by me, at least second owner, edge looks like he didn't carry it much either, centering is good. No box or anything else. Got this one in a trade, presumably LynchNW clip and he said the hardware was anodized titanium and fat carbon scales. Small scratch in coating near edge, smudges also

---]Vero Engineering Avid 1, S45VN, $125

---2nd owner, minimal cut and carry fidgeted with a good bit stropped once I believe centering is good, comes with box. Only issue I see right off is there's a very faint line in the G10 where the wire clip rubs against the scales, kind of hard to get a picture of but I added one to the album

---]Kershaw Launch 7, CPM154, $85

---First owner, no cut(except a page from a Vogue and a page from the phone book) centering is good, no carry kicks like a mule, I did replace the clip with a generic black deep carry clip for a true deep carry, no original clip I think it's lost, passed a time or two on the strop, a little aluminum oxide on the coating from it, comes with a Kershaw box not it's box

---]Microtech Scarab II Gen III Proof Run, M390MK, $255

---at least 2nd owner, cut carried centering is good comes with box, sharpened to 3k on fixed angle system, fires with great authority. Previous owner carried it as his work knife, minor wear on blade, personally never really carried it other than a small handful of times. Auto legality is responsibility of buyer

---]EDC Bundle, Roxon & Knipex, $100

---First owner, carried a week or so before my Arc came and never went back, utility blade may have been used once or twice on mail, Knipex never used and pouch never carried, does NOT come with the Cobra. Roxon comes with 6 extra implements some spacers original box and packet with instructions, never opened and has spare wire cutters

---]Spyderco Delica 4, VG-10, $65(50 add-on) SOLD SOLD SOLD

---First owner, no cut, only carry was from gun show to home and directly put on shelf centering is good no defects or issues still very new was an impulse purchase, no box

---Kizer Drop Bear, LC200N, $65(50 add-on) SOLD SOLD SOLD

---the most user of a user I've ever used, cut carried sharpened reprofiled, dropped, thrown, abused but never slowed down, centering is still great action is somehow still factory and crispy, missing it's clip. Was my back up work knife and has served me above and beyond well but I just don't carry it anymore, come with box but missing it's spare springs and cloth

Trades are very limited but always happy to listen, please ask about them or check my comments on the most recent WTB thread

Please message for more pictures or with any more questions, thank you


r/Knife_Swap • • 27m ago

WTS - 🔥All The Polish. Full Timascus & Mirror Vanax Vanguard Jaeger🔥

Thumbnail
gallery
• Upvotes

Hey all,

I've got a really special one today. I waited forever for this one to get here, and it's an unbelievable stunner, but I'm chasing other things. Come get this fully polished timascus and mirror polished Vanax masterpiece before it's gone.

Knife comes with everything it would have from the factory, including the beautiful wood presentation box!

Please comment  if you are interested before sending chats or PMs. Know your local knife laws, and thanks for looking.

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

VANGUARD JAEGER

  • Gorgeous mirror polished drop point to break in, but the thumb disc offers plenty of grip for deployment from both sides. The close is very smooth due to the polished Vanax blade.

  • First owner.  No cutting, carry or disassembly. 100% condition. Centering looks dead on and lockup is solid.

https://youtube.com/shorts/4rC9KMd9MUE?is=Wti3UJp_QgF5SnDJ

$550


r/Knife_Swap • • 4h ago

[WTS] Spyderco & Arcform: Manix 2 Salt, Alt Cut, Pry Bar

5 Upvotes

Proof: https://imgur.com/a/IdYb222

Hello, everyone. Today, I have a Spyderco & Arcform Bundle for sale.

  1. Arcform Pry and Alt Cut Never cut or carried and first owner. BNIB. No accessories. Both are discontinued.

  2. Spyderco Manix 2 Salt in Magnacut. Never cut or carried and first owner. BNIB. No accessories. Centering and locking are factory and solid.

Im asking $255 OBO for the pair.

PPFF. No International Shipping. No Trades


r/Knife_Swap • • 4h ago

Sold/traded Wts ti/ti SMF

5 Upvotes

Timestamp/video https://imgur.com/a/hdY62lN

~~Hi swap I have this ti/ti smf magnacut for offer . I am looking to recoup funds so no trades please. Ships out priority the following day. Payments will be ppff or zelle.
Strider stonewash full ti magnacut smf-I am first owner from recon one or edc lifestyle I believe.It is a weekend user,it has been taken apart multiple times and cut with mostly plastic bags. The edge is factory and still very sharp, blade steel is magnacut and centered. I replaced the washers with a set off amazon after pinching one of the originals. To my surprise they are a perfect fit. It currently does not have lock rock or detent lash, but tends to get light lock rock if screws come loose. I recently picked up the cc version and do not need two smf’s. I think I paid 1000.00 from recon 1 but yours ~~sv625.00~~. Sold sv600

https://imgur.com/a/hdY62lN


r/Knife_Swap • • 10h ago

[WTS] Spyderco 50th anniversary Native 5, Purvis black ghost timascus clip and backspacer for a standard Rosie

Thumbnail
gallery
14 Upvotes
  1. Spyderco 50th anniversary Native 5, LNIB, original owner, no cut, no carry, S90v blade, amber colored bone scales, Damascus steel bolsters, back lock, 2 handed open and close. Needs breaking in. COA and all original packaging and contents included. SV - $750 OBO

  2. Purvis ghost finish black timascus clip and backspacer for the standard OZ Rosie, like new, original owner. Has been installed, but not carried as I've opted to keep my Rosie in its original config. Paid $250, direct from Purvis with a 6 week wait time. SV - $200 SOLD


r/Knife_Swap • • 2h ago

WTT: 15v PM3

3 Upvotes

Timestamp and Video: https://imgur.com/a/4HYzmZR

WTT: 15v Pm3
TV: $190
I’m the first owner. Light carry. Cut some paper and boxes a few times but that’s it. Love the knife just too small for me I prefer pm2’s. Centering is good. Lockup is solid. Action feels like all the pm3s I’ve had. No snail trails. Comes wit box and papers

Trade interests :

-Spyderco Shaman (preferably a Salt)
-Ram Lock Ludt or Mini Amphibian


r/Knife_Swap • • 8h ago

Sold/traded [WTS] CRK Small Inkosi Crosshatch

Thumbnail
gallery
7 Upvotes

3rd owner of this small crosshatch magnacut glassblasted inkosi. Was carried by the first owner but no cut. One small snail trail you can barely make out, so I circled it in red. Blade and edge look to be in great shape, as do the rest of the scales and hardware. Lockup is solid with no stick, slip or play. Well centered. Comes with untied lanyard and rest of the full kit. DOB: 9/22/26. Lanyard has been untied and removed.

SV $500 shipped in the US. Thanks!


r/Knife_Swap • • 7h ago

Sold/traded WTS: full ti hinderer xm-18 NF fullered spear , mefp

Thumbnail
gallery
7 Upvotes

Catch and release going to give someone a good deal on this get it out of my house. No offers no trades
I prioritize Yolo over chat but reserve the right to make the final decision. Please be ready to close the deal in a timely manner or I may move to the next person. PayPal friends and family no notes.

### [WTS] Hinderer xm-18 NF fullered spear full ti
🔴 SV $475 🚢🚢🚢. SOLD

---
**Hinderer xm-18 NF fullered spear full ti :**
- Model Number: Xm18
- Steel: M390
- Sharpened: Yes
- Used to cut: Yes
- Carried: Yes
- Blade Condition: Sharpened
- Number of Owners: 3+
- Centering: Perfect / great action
- Lockup: Solid
- Visible Issues: None/ very very nice
- Accessories: full kit , has mefp show scale , mefp pocket clip , hinderer ti back spacer

**Payment methods accepted:** PayPal Friends & Family
**Shipping included?** Yes

**Will NOT ship to:** International/ conus only Hawaii and Alaska may have to pay the difference in shipping

_I confirm I have read all [r/Knife_Swap](r/Knife_Swap) rules._

Made with [KnifeSwap Post Generator](https://knifeswap-post-generator.vercel.app/)


r/Knife_Swap • • 6h ago

Price Reduced [WTS] Hawk Talon, Microtech Nemesis IV

5 Upvotes

PP FF with no notes or Venmo. Price is shipped to the US. Reply below takes precedence over chat. If you want what is listed, please post below first. No trades at this time.

Timestamp - https://imgur.com/a/TBve9rC

Hawk Talon - from 2026 with M390 blade and titanium scales. This is their darkwash version that predates the brightwash they’re doing now. Second owner. Excellent condition. No cut and carry by me. First owner reported cutting tape and opening a few boxes. Never disassembled and edge appears flawless. Comes with Hawk taco pouch, card, chapstick, and tool.

SV $980 $930 $880 SOLD

Pics and vid - https://imgur.com/a/drSA2qm

Microtech Nemesis IV - 01/2026 DOB. M390MK blade with Apocalyptic finish. Third owner. Never cut, never carried, and no disassembly. Minor signs of handling that I show in pics and video. Overall excellent condition with an amazing and strong single action. Comes with box, cloth, cloth pouch, paperwork, and sticker.

SV $650 $625 $600

Pics and vid - https://imgur.com/a/1FoYNME


r/Knife_Swap • • 5h ago

Sold/traded [WTS] Demko Nano Shark, Razor Shark, Jack Wolf Coffin, Rivery Zero V2, Spyderco ButtonUp

3 Upvotes

Only selling, no trades please

SOLD as a lot for $300 Willing to sell everything for $325 shipped otherwise see individual prices below. Open to reasonable offers.

Prices include USPS shipping (US addresses only please). Payment via PayPal F&F, no notes.

Timestamp

Demko Nano-Shark G-10 20CV SV: $125
First owner. 20CV sharkfoot variant, black G10. Never cut, carried, sharpened or disassembled. Smooth action, centered blade, no noticeable flaws. Comes w/ left handed clip, original container.

Demko Razor Shark SV: $45
First owner. Never used, carried or disassembled. Black GRN variant. No noticeable flaws. Comes with original box, Torx tool, extra blade retention screw.

Jack Wolf Gateway Coffin, Richlite SV: $75
First owner. Maple Valley Richlite, 14C28N. Never used, carried or sharpened. Excellent action, strong pull, crisp half stops. Blade centered, fit/finish is clean. Original packaging included.

Rivery Mfg Zero V2, Gemstone Gray SV: $60
First owner. Never used or carried. Gray Aluminum V2 new “Gemstone” pattern. Played with the action and opened it to peep the internals. Never had a V1 but apparently V2 has a redesigned blade holder + updated bearing surface for wider blade compatibility and easier service. All original packaging included.

Spyderco ButtonUp, CF Black Oxide SV: $60
First owner. Blacked out variant with carbon fiber/G10 laminate scales, black hardware, plain edge black oxide coated 8Cr13MoV blade. Never used, carried, sharpened or disassembled. Very well executed, smooth action, good centering, no lock stick or blade play. Original box/docs included.

Thanks! 🤙


r/Knife_Swap • • 6h ago

Koenig Mini Arius Corda Pattern

Post image
4 Upvotes

Koenig Mini Arius

WTS: $580

https://imgur.com/gallery/X27Ad5A

First owner, bought directly from the Koenig store.
It’s been carried, but never really cut much other than envelopes.
The blade Burnished M390. The edge is factory. Never sharpened. There is a mark on the blade on the show side about a quarter inch below the K in Koenig. I think that it shows in the gallery. It came that way, but full disclosure.
The scales are the Corda pattern with blue highlights and have some very minor signs of wear. As does the clip. Hard to notice unless you’re really looking.
No disassembly.
Lock up is solid at about 40%.
Centering is good.
Action is what you’d expect. Very good. Will shake shut.
Comes with the original box, Cloth, COA, & Koenig Sticker.
This is an awesome little knife. I just don’t use it. Apologies for the out of date time stamp in the gallery. Meant to post yesterday, but the day got away from me.

Ships USPS
PayPal G&S

The only trade I would consider is a full sized Arius with a carbon fiber scale and Brightwashed blade.


r/Knife_Swap • • 8h ago

For sale Hawk Talon User

7 Upvotes

New timestamp- https://www.flickr.com/gp/204011091@N06/7jjo8BG476

Pic of blade- https://www.flickr.com/gp/204011091@N06/717Ga61448

Video- https://www.flickr.com/gp/204011091@N06/o190y2o6V7

I am the second owner. I bought this awhile back. Guy didn’t disclose the chips in the blade when I bought it. Has been carried and used before I got it. Blade is centered and locks up solid. You can see the chips in the picture and video. Any questions please ask

SV sold for 650

PayPal f&f. I’ll ship next day. Thanks


r/Knife_Swap • • 10h ago

[WTS] Skelton Knives SK-050 Clip-Point Warden – 80CrV2 / Fire Micarta / Kydex – $230

Thumbnail
gallery
9 Upvotes

Timestamp: https://imgur.com/a/knaeVmh

Hey everyone! I've got another handmade knife from my shop, Skelton Knives, available today.

This is SK-050, my Clip-Point Warden, a larger version of my Warden model built for hunting, field work, and general outdoor utility.

This one features a 6-inch clip-point blade made from 80CrV2 carbon steel, with a high flat grind, swept plunge lines, and a clean satin finish. The handle is made from Fire canvas Micarta with thin black G10 liners and stainless-steel hardware.

The handle scales are individually shaped and contoured with a comfortable palm swell and a lightly textured finish for a secure grip.

I kept the overall design clean and functional, letting the blade geometry and handle materials speak for themselves.

Specifications:

- Maker: Skelton Knives

- Model: Clip-Point Warden

- Serial Number: SK-050

- Steel: 80CrV2 carbon steel

- Blade Length: 6"

- Overall Length: 10.5"

- Blade Thickness: 0.117"

- Blade Style: Clip point

- Grind: High flat grind with swept plunge lines

- Blade Finish: 800-grit satin bevels / 600-grit satin flats

- Handle: Fire canvas Micarta

- Liners: Thin black G10

- Hardware: Stainless-steel pins and lanyard tube

- Construction: Full tang

- Edge Angle: Approximately 18° per side

- Sheath: Custom-fitted black Kydex, included

Heat Treatment:

Heat treatment was performed in-house. Austenitized at approximately 1475°F with a 5-minute hold, quenched in Parks 50, and tempered twice at 400°F for two hours per cycle.

After tempering, the 60 HRC hardness file skated while the 65 HRC file began to grab. These are approximate hardness-file results, not a certified Rockwell measurement.

SV: $230 shipped

The price includes the knife, its fitted black Kydex sheath, and shipping within the United States.

Payment through PayPal Goods & Services.

I'm a small independent maker working out of South Carolina. Every knife I produce is individually profiled, ground, heat-treated, finished, and assembled in my shop.

Thanks for looking, and I appreciate everyone's continued support of Skelton Knives!


r/Knife_Swap • • 8h ago

[WTS/WTT] Hinderer Eklipse 3.5”

Thumbnail
gallery
6 Upvotes

Hinderer Eklipse 3.5" Magnacut Swedged Spear. Battle Bronze. 2023 One Hole Filler Tab, Ti stonewash blue.

-Magnacut
-Perfect centering
-Lockup is very solid, no blade play
-Second owner
-Carried very lightly and cut very lightly
-Never sharpened
-9.5/10 condition
-The only downside with this knife is I can’t find the box and stickers for some reason. Ball bearings currently installed on the knife however.
-The only trade I’d be looking for is a Large Sebenza with an Insingo blade. Thanks for looking!
-$350