r/lasercutting • • May 16 '23

New Rules!

102 Upvotes

Due to a rise in spam since the beginning of the year, we will be moving back to no selling/buying on the subreddit. We'll do this with the 2 new official rules of the subreddit.

1) No selling
The sub is meant as a place for people to share their personal creations and personal experiences, not to sell machines, materials or files. Any post/comment that mentions selling of lasers, materials, or files will be removed. Repeat offenders will be banned.

2)No advertising
The subreddit r/lasercutting is FIRSTLY AND ONLY for LASER USERS, not the COMPANIES that sell them. Any accounts that are directly used for the promotion of a brand will be banned.

Being paid to promote a product and not disclose it is not only against Reddit's TOS but FTC Guidelines as well. Any user that posted to the subreddit in an attempt to advertise for a laser manufacturer without disclosing it will be reported and banned.

In addition to the 2 above, I've also added rule -

3)Keep it civil
Everyone here enjoys lasers in some way so we all have something in common.
Do the right thing and keep it friendly with the other users of the sub. Criticism is
part of the creative process but try and keep it positive when discussing everything.

Thanks
Noctis


r/lasercutting • • May 31 '24

Laser works hub?

10 Upvotes

Seen a few ads for laser works hub and wondering if anyone has any experience with them. It basically seems like a bunch of designs you buy as a huge bundle for I think $125. I don't know why but it seems sketch. With how much advertisement I've seen I would think it would be a subscription or something. Something just seems off but the things I've seen look cool


r/lasercutting • • 2h ago

Drain grates for dioramas, cut in .030 stainless by SendCutSend

Post image
53 Upvotes

First batch of my drain grate designs came back: round grates, diagonal-slot grates, and curb gully grates. Copies of each type are joined by small tabs so the tiny parts don't get lost. Next up is paint and rust, then setting them into a street base.


r/lasercutting • • 8h ago

Finally dialed in the paper settings on my engraver without scorching the edges

Post image
21 Upvotes

Tested some fine line shading and tiny text on thick kraft cardstock using my aliencell laser. honestly thought the small lettering under the title would just turn into a burnt smudge, so i kept the power super low and bumped the speed way up.

pretty happy with how crisp the shading came out on the first real pass. anyone else engraving cardstock here. do you use air assist on paper or turn it off so it doesn't blow the piece around?


r/lasercutting • • 1h ago

Business cards?

• Upvotes

Anyone laser the backside of business cards to include with products? I’m thinking something simple like “thank you for your purchase”, or a quick thank you mentioning the product - which allows for one business card to serve for multiple products. Curious if it’s just going to end up looking bad, or smudging, or just burning through…


r/lasercutting • • 15m ago

Flux beamo

• Upvotes

Looking to purchase a flux beamo machine for cake toppers. Where’s the best place to purchase mirror acrylic sheets with quick shipping and decent prices. In NY for context. Thanks!


r/lasercutting • • 39m ago

Budget Cutter Recommendations

• Upvotes

I'm looking to cut some paper to make standees. I'm also working on a pretty tight budget, let's say 200-300 max. The more I can save the better though. I'm trying to stay cheaper than a facebook market place cutter machine (cricut, silhouette, whatever)

I don't really know what I need/want, but I know I'm getting decision paralysis now with future plans and upgrades and "the possibilities"... Save me from myself. I just want to cut paper on the cheap and I can come back to buy swanky stuff in the future if I ever need it.


r/lasercutting • • 21h ago

Cribbage finshed

Thumbnail
gallery
30 Upvotes

Well maybe, I might add cozy spots for pegs and a ddck or two.


r/lasercutting • • 9h ago

I need examples of thing that can be done with a k40 machine

Thumbnail
gallery
2 Upvotes

I need pic of projects made with a k40 or similar machine. I would love to see yours (will prolly post online as example) here a some of mine


r/lasercutting • • 5h ago

Any Aliencell X1 owners here? How has it held up? Is it as good as everyone claims?

Post image
0 Upvotes

r/lasercutting • • 11h ago

Laser-Neuling braucht Hilfe – AtomStack M50

2 Upvotes

Hallo zusammen 😊

Ich bin absoluter Neuling beim Lasern und habe mir vor Kurzem einen gebrauchten Laser gekauft.

Mein Setup:
AtomStack A5 40W
Nachgerüsteter AtomStack M50 (10 W)
LaserBox V1.5 + T&P V2.1
Netzteil 12 V / 5 A
LightBurn
Air-Assist-Umbau (ohne Pumpe)

Mittlerweile sind einige Fragen aufgekommen:
Warum ist die Geschwindigkeit in GRBL ($110/$111) auf 2.000 mm/min begrenzt? Kann ich diese erhöhen? Ein Untersetzer dauert aktuell ca. 30 Minuten.

Welchen Fokusabstand benötigt der M50 mit nachgerüsteter Air-Assist-Düse? Aktuell verwende ich eine 2-mm-Karte unter dem Gehäuse.
Das blaue Schutzfenster am M50 fehlt. Ist das beim Umbau normal?

Hat jemand gute Einstellungen zum Gravieren von 2,3 mm Stempelgummi? Trotz mehrerer Durchgänge beträgt der Abtrag nur ca. 0,5 mm. Bei höherer Leistung verbrennt das Gummi.

Beim Schneiden komme ich mit 900 mm/min und 100 % Leistung selbst nach sechs Durchgängen nicht durch das Gummi.

Den Laserkopf habe ich bereits gründlich gereinigt. Eine Air-Assist-Pumpe möchte ich mir vorerst nicht anschaffen.

Vielleicht hat ja jemand das gleiche Setup und kann mir ein bisschen weiterhelfen. Ich würde mich sehr über eure Tipps freuen!

Danke schon mal 😊


r/lasercutting • • 8h ago

Recommendations

1 Upvotes

Hey yall, I'm looking to get a touch screen computer or tablet that can run my laser cutter and be able to do 2D & 3D design as well as digital art. Does anybody have any recommendations?


r/lasercutting • • 14h ago

CO2 laser tube problem

Post image
2 Upvotes

Hey! My co2 laser tube's output coupler has been darker and hazier than usual lately. What caused this?


r/lasercutting • • 17h ago

Beginner question

3 Upvotes

Hello fellow redditors,

My wife and I have a small side hustle with Ritual candles and trinkets.

We started small, learned a few things and now we are at the point where we have a steady stream of purchases and now we want to elevate our products.

Laser engraving seems like a very cool way of doing this and I spent 300€ on a small batch of 50 UV engravings for our Glas containers and put them side by side to our old products for 7€ more and they sold out fast.

We have been playing around with the idea for quite some time now and a friend offered to chip in 1000€ if we engrave crystals for him. Not very expensive ones so we could try a bunch but they are still pretty hard stones (Mohs hardness of 7.5–8).

So now to my question, I like the way the UV engraving works for our core products so I am pretty set on that and I looked at the xtool f2 ultra UV in a show room and was impressed but are there other vendors that I should look into? And should I even bother with crystals, did anyone try something along those lines?

Any help is appreciated!

Edit: For clarification our budget is up to 8000€ and the friend would chip in the 1000€ for two crystal engraving runs of 50 pieces each.


r/lasercutting • • 1d ago

Creality 5W falcon - air assist

Thumbnail
gallery
3 Upvotes

So I picked up the 5W Creality falcon to try to learn more about laser engraving and cutting. I saw so many people talk about adding the air assist, so I picked that up and got it fitted. Now I am trying to figure out my settings since the air assist nozzle sticks lower than the pre-fixed focus.

Has anyone made this work or do I just need to take the air assist off and save it for some different laser in the future.


r/lasercutting • • 2d ago

New box with a secret lock

214 Upvotes

r/lasercutting • • 1d ago

lente para una Falcon A1

1 Upvotes

necesito comprar unos lentes para mi maquina FalconA1 10w, estoy en latinoamerica y se me hace muy facil adquirirlo por aliexpress u otro, pero no se las medidas, por favor si alq¡guien me puede ayudar


r/lasercutting • • 1d ago

Need help, new on laser engraving

Post image
4 Upvotes

I recently bought a Sculpfun E1
I used to buy cheap materials, and got nothing working, a lot of residual ash left behind and no accual engraving, just bought this 3mm MDF someone recommended to give it another go, what speed and power would you think is best?


r/lasercutting • • 1d ago

Nesting Question

1 Upvotes

I have this set of cuts (red cut, purple etch) where each route is grouped with the applicable number to let me know which it is.

Would the pro version of Lightburn's True Nest be able to figure out if all of these will fit in an 11.5" square?

The non-pro version just overlaps cuts and sending to SVG nest isn't giving me a square area to select as the target.


r/lasercutting • • 1d ago

A cheap option for extraction

Thumbnail
gallery
13 Upvotes

I recently got back into running my old D1 Pro (out in the garage) but wanted something better than a smoke filled garage with sub-par fans and windows/doors open. Found a range hood on marketplace for $15, did a quick fusion sketch for an adapter, printed up two and hooked up some 4” exhausts. Works great!! (Still have an opposite end window open for air intake!) Unexpected bonus, I now have lights directly over the work!


r/lasercutting • • 2d ago

Selling Laser Files vs Laser Products - Which is better?

Post image
58 Upvotes

Obviously the answer to this question is partly "it depends..." based on what you are designing, where you are selling etc.

What I am looking for advice on is specifically that I design 3D "escape room" type puzzle boxes that are relatively complicated to assemble, requiring some kind of assembly instructions if I was to sell the actual designs, which I am not opposed to doing.

The issue I am running into is this: I know that if I put these designs out there someone is going to rip it off and sell it as their own and I would be constantly trying to play whack a mole with all the copycats.

Would you all recommend selling physical products over the designs or in your opinion is the hassle of shipping and self assembly not necessarily worth it?


r/lasercutting • • 1d ago

Best laser setup for cutting and batch engraving: xTool X1 or separate CO₂ and galvo machines?

7 Upvotes

I’m looking at upgrading the CO2 setup in my shop. I mostly work with wood, plywood, and acrylic, and the cutting side is already fast enough for what I do. The bottleneck is engraving. Large texture fills, small lettering, and batches of repeated designs can take a long time on a CO2 gantry.

I started looking at galvo systems as a way to speed that up. My original plan was to buy a conventional CO2 machine and add a separate galvo later, but then I came across the xTool X1, which combines both systems. The idea sounds useful for my work, especially if the galvo can handle repeated lettering and texture engraving on wooden signs before the CO2 laser cuts the final shapes. What I cannot tell from demonstrations is how well this works in regular production. I am particularly interested in whether engraving first and cutting second is reliable, and whether larger designs show visible joins when the galvo divides them into several sections.

Has anyone used a CO2+galvo combination for batches of wooden products? Does the galvo save meaningful time while still producing clean, consistent results? I would continue using CO2 for acrylic, so if the budgets were similar, would you choose a combined machine like the xTool X1, or buy a regular CO2 machine from Glowforge or Gweike and add a separate galvo later?


r/lasercutting • • 2d ago

How to clean an aluminum honeycomb laser bed?

8 Upvotes

I've been looking into better ways to clean our library's laser bed. I've seen a lot of people say LA's Awesome Cleaner is a great option but I don't know whether I should dilute the cleaner and submerge the bed and leave it or just spray it on. I've been using a pipe cleaner to clean the holes but I'm giving up on that due to how time consuming it is. Ive also been using zeps degreaser and adding it to the water the beds in, but it doesn't get absolutely everything and there is still debris left behind after an hour. What should I do?


r/lasercutting • • 1d ago

Sculpfun S30 Ultra for beginning

1 Upvotes

Hello there. I'm new to the laser cutting world (actually, I'm not even part of it yet) but I see it as an interesting hobbie and posible side hustle that I could do in my free time (I have plenty of it) or if it goes well, put more hours into it if it makes a good profit.

I dont own a laser cutter, but I'm thinking of getting the S30 Ultra since it's on sale. I'd like to get into both cutting and engraving, including metal, therefore, I'm thinking of getting the whole package, that is

The Sculpfun S30 Ultra for 760 USD, plus

The RA Pro Max rotary for 264 USD

The 2W IR Laser module for 352 USD

The size wxpansion for 195 USD

(I know it's cheaper on the US store, but it'll probably end up the same with customs and taxes)

Overall, the investment is 1479 USD for all of that.

I don't actually have a use for it, other than being creative, trying new things and engraving gifts for my family/friends, and offering services in facebook marketplace.

Business wise, I've identified that there almost no offerings for custom sized cardboard boxes, and also no engraved boxes. There are very few, but ask for 500+ units minimum. With this in mind is why I chose the S30 Ultra and added the expansion.

My business idea (at least at the beginning) is not big orders, but the opposite, focus on those individual requests (gifts for friends, anniversaries, small orders) and using social media to promote.

On the other side, If I like the business, my big orders idea would be to connect with local wedding/event planning businesses and having them offer to their clients engraved products that I would provide.

My question is, do you recommend the S30 Ultra for an absolute beginner (I love learning thoughn and I'm a bit of a handyman myself)? AND, would you recommend getting the extras now, or waiting to see if I like it and expand to metal engraving with the IR and rotary later on?


r/lasercutting • • 2d ago

I think we’ve narrowed it down to the M2….

Thumbnail
gallery
10 Upvotes

I posted here a few days ago about getting a cutter (as a beginner) to make ornaments and small crafts like the one pictured, and the support and suggestions were great! So I did a lot of research on the Xtool m2 machine as recommended and think it would be perfect for making small layered crafts , not necessarily for the color printing aspect, but for the entire project process. I’m impressed by the “replacement modules “ the m2 offers to swap out different wattage lasers and the color printing option. Before I add to cart, does this seem to be a logical choice for my needs and entry level experience, and does anyone know how well it works with Mac? Thanks again all for your input and feedback!