r/lasers • u/LimpyDan • 18h ago
A little handheld lineup
Thought it looked cool. No eyes were harmed.
r/lasers • u/gibbow • Jun 29 '20
My apologies in advance for the rant...
I have seen numerous recommendations here for laser safety eyewear from companies who I would not trust with protecting my vision. Such products are not guaranteed to be tested as per the ANSI z136 standards (EN207/208 for those in Europe). Some companies even have disclaimers right on the product websites claiming the eyewear is not meant for situations where safety is regulated.
People are lucky if we have 2 working eyes. Laser radiation is a hazard to be taken seriously. The aversion response (blinking or looking away) can help prevent injury for lower powered laser but generally speaking, when we start moving into Class 3R and absolutely climbing into Class 3b and Class 4 lasers, the aversion response cannot be relied on.
The eye is an amazing muscle capable of focusing images (up to 100,000x) and serves as a direct connection to the central nervous system via the retina. If people are going to buy lasers, they should invest in quality protective equipment. Some damage to the eye such as a cornea burn may be able to recover relatively quickly thanks to the crazy high metabolism of those cells, but damage to the retina...why risk permanent damage?
Furthermore, if you do not know this already, take time to learn about laser safety. Familiarize yourself with terms such as irradiance/radiant exposure, Maximum Permissible Exposure (MPE), and learn how to calculate the optical density required for your laser or the laser you are looking to purchase.
There are a lot of reputable companies producing quality laser safety eyewear who test to rigorous standards (The ANZI z136 series even includes a standard specifically for Testing and Labeling of Laser Protective Equipment (ANSI z136.7). Please, please, please, do not risk your vision by choosing affordability over quality when it comes to laser safety!
r/lasers • u/LimpyDan • 18h ago
Thought it looked cool. No eyes were harmed.
r/lasers • u/Ok-Move3063 • 8h ago
r/lasers • u/ricodylan13 • 1d ago
I’m looking for a laser pointer to use during the day for pointing on my project sites. Ideally needs to be strong enough to point at objects several hundred feet away at max.
Please provide any recommendations for specific lasers or just specs that I would need to look for to be sufficiently powered.
I previously was going to buy an Olight with lights and laser built into one but it doesn’t seem that it would be strong enough at 5mW.
Much appreciated!
r/lasers • u/Fancy-Succotash-5981 • 1d ago
r/lasers • u/Fancy-Succotash-5981 • 1d ago
r/lasers • u/Impossible_Ideal6799 • 1d ago
I'm trying to identify this OEM laser assembly and the documentation that belongs with it. The attached photos show the assembly, its labels, and a separate Laser Quantum LGC controller with GREEN/BLUE channels.
The assembly label reads FG-LGM-457-532-BRU-r3 and 'OEM Integration Only', with a Class 4 laser warning. I have not verified its functionality or completeness.
Does anyone recognise the original instrument or application this assembly was designed for? Is there a public datasheet/manual for this particular OEM part, and what external components would normally be included with it? I'm looking for identification and documentation, not instructions to energise or bypass anything.
Photos below:
r/lasers • u/RangeAutomatic8368 • 2d ago
r/lasers • u/TheHumorousSquid • 2d ago
r/lasers • u/alyberger • 3d ago
I bought a historic mansion with miles of mahogany trim that’s been painted shite, I mean white, and it’s testing positive for lead so I dread spending weeks and weeks chemically stripping it.
In my research I’ve found it’s tricky to get white paint off of wood and people keep saying you have to have particular lasers but I haven’t found any specific recommendations. I wanted to ask the people of Reddit before I hit salespeople
r/lasers • u/Electro_cri • 3d ago
Inspired by styropyro video, where he created a burning handheld laser with the best wheight/power ratio, i decided to do a simil project but stopping at the dvd burner LD.
My setup is very similar to his, I am using a 3mw red laser pointer for the base and all the circuit is identical.
The main problem is that i am not sure what case with lens i have to buy, since there are so many options and variables. I found one on aliexpress which seems to meet my needs, is a 12*30mm case with plastic lens (im not sure that is going to handle 250mw but i hope that it does). The size is perfect for what im going to do, but im concerned about if it can dissipate enough heat (i have no idea how much the LD will heat up), i mean, styropyro did that in an even smaller case, but i dont want to ruin a good LD, i have to be 100% sure that is enough at least for 15 sec running time continously before letting it cool down.
r/lasers • u/Marvel5123 • 3d ago
Looking for a green laser to use at a construction site to point out things. Saw there are some Class 1 and Class 2 options but the quick research I did made it seem Class 3R will be the highest/strongest available for consumer use.
What's a good/affordable/basic Class 3R green laser? Saw Olight makes some (Arkfeld) but was curious if there are good laser only options. Thank you.
edit: saw some from "laser classroom" --- are they a legitimate company? do not want to buy an off-brand off amazon/ebay
r/lasers • u/PhotonFunBum • 4d ago
Good time to get beam shots! Please check flight radar just in case.
Nova titan 2 watt green with beam expander. 520nm
r/lasers • u/ChEEtO225_ • 5d ago
I’ve seen videos online like this one here of people using stupid powerful IR lasers like the one in this video, and half of them never wear eye protection AT ALL…
Are these lasers fake? Are these people just masters of safety squints? Or are they doing something behind the scenes with editing? Because from what I know a laser in the double or triple digit watt range isn’t exactly a casual point and click device.
r/lasers • u/Fancy-Succotash-5981 • 4d ago
I am trying to get the sanwu pocket, and i am not sure why it is so much cheaper, and includes so much more stuff than the original website. Do they do something to the laser, make it less powerful, or what?
r/lasers • u/kaktusmisapolak • 5d ago
I’ve seen it as of it being an alternative to goggles, possibly being even safer than them
observing the spot of a >5mW laser can cause eye damage, camera prevents directly looking at it
does it actually work as safety? how much better is it than looking directly?
of course the possibility of it hitting you from the side, that could be solved by looking through VR headset passthrough (although cameras would be expensive to replace if damaged), putting stuff around it (or even making a google cardboard) or using a camera with a viewfinder that is pointed at a screen instead of using optics
r/lasers • u/Fancy-Succotash-5981 • 5d ago
looks sketchy, but seen some reviews. dont know if they are botted
r/lasers • u/Open_Translator_7237 • 7d ago
Bonjour à tous, je recherche un laser à fibre avec une source défectueuse (non fonctionnelle), à petit prix. J'en ai besoin pour des tests avec un logiciel. Si quelqu'un en possède un et serait prêt à me l'expédier en France (à mes frais), je serais très intéressé. Merci d'avance !
Hello,
The ACMER S1 2.5 watt is a great entry into the engraving universe for me. The issue is a lack of instructions on what all the settings mean when using the ACMER engraving software. I see parameters on the ACMER site for other engraver models. Does anyone know if there is parameter info for the S1 2.5w?
TIA!
r/lasers • u/bronizon • 7d ago
For those of you who have completed a PhD in atomic or molecular photonics: what kind of career opportunities did it open up for you?
I'm particularly interested in hearing from people who have completed their PhD and are now working in industry. What kind of positions do you currently hold? Did you move into the semiconductor industry, quantum technology, R&D, optical engineering, or something completely different?
I have a MSc in chemistry with a specialization in photonics and I'm currently considering pursuing a PhD in this field, with a particular interest in quantum optics, nanophotonics and light–matter interactions. I'd like to get a better understanding of how transferable these skills are outside academia and what kind of industry positions they can lead to.
How difficult the transition from academia to industry was and whether this PhD specialization has been an advantage or a limitation?
r/lasers • u/GB_Production • 7d ago
r/lasers • u/Character-Stomach485 • 8d ago
Thoughts, good and bad? They seem legit af, I plan on spending quite a bit of money in the near future and don’t want to be scammed or dissapointed…..thoughts? Thanks! 🔥🙏💯
r/lasers • u/cooktaussie • 9d ago
Hey, so I was at an event a few weeks ago, and there was a lady making huge soap bubbles >30cm in size some easily 50cm big. The lasers were quite low maybe 7feet above everyone's head but pointed upwards into the trees, and she was taking the soap bubbles she was making and putting them up into the high powered lasers, I think there were 4 of them with multiple lasers each and 40watts total amongst them.
How dangerous would the lasers be refracting from the large soap bubbles? I was concerned and avoided looking at them, but I am very curious.