r/lightingdesign • • 18h ago

Fun SEVEN SINS by @RenMakesMusic (programming exercise)

Thumbnail
youtube.com
0 Upvotes

Track by the creative genius ‪@RenMakesMusic‬. If you have not come across him yet, literally everything he touches is quality.

Automarker, SEW, MA3 (2.5.1.1), Depence


r/lightingdesign • • 4h ago

Sending NDI video into Vor

2 Upvotes

Hi all,

For an upcoming show I’m going to be using Vor to record our rehearsals, and I’d like to input video over NDI— I’ve already gotten NDI to the Mac that’s going to be running Vor, and I’m able to get the NDI Video Preview app to work just fine. The issue I’m having is getting Vor to receive the NDI video. I tried using NDI virtual input to create a video source within the computer, and the preview on virtual input looks fine, but in Vor the preview is frozen, and recording stops working. It might be a framerate issue, since Vor thinks it’s a 1080p60 signal coming in, but I know the camera is only outputting 1080p30. Unfortunately in Vor settings, it doesn’t allow me to change the input framerate to 30fps.

Vor doesn’t have much documentation on how to set up NDI input, but on their website it says input can be configured using NDI access manager. If anyone has experience with this, or has any other ideas of how I could get this to work, that would be appreciated!

My backup option is currently buying an SDI capture card since the camera i’m using also outputs 3G, but that’s something I’d like to avoid if possible. Thank you all!


r/lightingdesign • • 4h ago

Control Depence R4 on Apple Silicon Mac – working setup with VMware Fusion

2 Upvotes

Hi all,

I finally got Depence R4 (Stage License, USB dongle) running on an Apple silicon Mac using VMware Fusion (free for personal use) with Windows 11 ARM. No Parallels needed.

Here is what worked and why.

There were two problems:

  1. "No Depence dongle found" – the installer and Depence dongle could not be found. It showed up in Windows but installing or starting Depence always threw "No dongle found"
  2. "Shader load error!" at "Initialize 3D-Engine"

-----------------------------------

PROBLEM 1: The dongle isn't recognized

Why: On Apple silicon, VMware Fusion only gives Windows a USB 3.2 controller. The Depence dongle is an old low-speed USB 1.x device. Windows sees it in Device Manager, but every attempt to actually read the license fails. Changing the USB compatibility in Fusion is greyed out, and forcing older USB controllers breaks keyboard and mouse in Windows ARM. So VMware's USB passthrough is a dead end for this dongle.

Fix: Don't pass the dongle through VMware at all. Share it from the Mac into Windows over the VM's internal network with VirtualHere (virtualhere.com, the free trial covers one device, which is all you need).

  1. Plug the dongle into the Mac. In Fusion's USB settings, set it to "Connect to Mac", NOT to the VM.
  2. On the Mac: download "VirtualHere USB Server" for macOS, move it to Applications and start it (it asks for your admin password once).
  3. In Windows: download "VirtualHere Client for Windows ARM64" (vhuiarm64.exe – take the ARM64 version!) and run it. It finds the Mac server automatically.
  4. In the client, right-click the dongle (shows as "USB-Chip") and choose "Auto-Use Device". It now says "USB-Chip (In use by you)".
  5. Only now run the Depence installer. It should go straight to "Select installation folder". If it says "No dongle found", cancel. Otherwise it installs the demo over your full version.

-----------------------------------

PROBLEM 2: "Shader load error!"

Why: Depence's 3D engine needs the old Microsoft DirectX June 2010 files (d3dcompiler_43.dll, d3dx11_43.dll, d3dx10_43.dll, d3dcsx_43.dll). On Windows ARM they don't get installed. DirectX 11 itself works fine in VMware; only these files are missing.

Fix:

  1. In Windows, download "DirectX End-User Runtimes (June 2010)" (directx_Jun2010_redist.exe, about 96 MB) from Microsoft's site.
  2. Create a folder C:\dxjun2010, run the download and unpack it into that folder.
  3. In C:\dxjun2010, right-click DXSETUP.exe -> "Run as administrator" and click through to Finish.
  4. Check that d3dcompiler_43.dll is now in C:\Windows\System32, then start Depence.

DAILY USE

-----------------------------------

Order matters: dongle in the Mac -> VirtualHere server running -> start the VM -> start vhuiarm64 (shows "In use by you") -> start Depence.

Optional: add the VirtualHere server to the Mac's Login Items and put a shortcut to vhuiarm64.exe in the Windows Startup folder (Win+R -> shell:startup). Then it connects automatically.

One warning: the VirtualHere server shares the dongle on every network your Mac is on. On public Wi-Fi, quit the server when you're not using Depence.

SETUP USED

-----------------------------------

- Apple MacBook M3 Pro 18GB with Golden Gate. 27.2.1

- VMware Fusion 26, Windows 11 ARM, 3D acceleration on, 8 GB graphics memory

- VirtualHere Server 4.8.9 (Mac), VirtualHere Client 6.0.3 ARM64 (Windows)

- Depence R4 4.1.4

Hope this helps someone :)


r/lightingdesign • • 5h ago

Looking for a good not break the bank sprectrometer

4 Upvotes

Any recommendations on an affordable meter to temp my spots.