r/linuxaudio • • 3h ago

I’ve open-sourced LiveWDF

3 Upvotes

I've been working on LiveWDF for a while, and I've finally made the repository public.

LiveWDF is a C++ project built around Wave Digital Filters (WDFs), focused on simulating analog audio circuits in real time.

I've been working on the simulation engine, component models, tube models and a lot of the underlying stuff that makes circuit simulation possible.

There's no official release yet. The project is still under development, and there's quite a bit of work to do before it's ready for one.

That's partly why I'm opening it up now. I'd love to get other people involved, whether that's contributing code, testing things, working on circuit models, improving documentation, sharing ideas or just helping figure out where the project should go next.

If you're into C++, electronics, circuit simulation, audio DSP or any of this stuff, come have a look. I'd be happy to have you involved.

GitHub: https://github.com/Yahiake/LiveWDF

Discord: https://discord.gg/8CV9S2zAQ

Let's get this thing to its first release together.


r/linuxaudio • • 19h ago

Will Ardour support microtonality at the daw level?

7 Upvotes

I think i've seen they will support loading scala file in their future releases. I'm excited about this honestly.

Does this mean they will adapt it to its piano roll? If so, Synths and VSTi that dont support microtonal function also can be microtonal?

And I wonder if its pitch resolution will be 64bit float precision or MPE-level 14bit accuracy. Bc MPE-level accuracy is not precise enough, it can lead to beating or phase issues. So i hope it wont be MPE based Pitch shifting. Would ardour adopt 64bit -floating point precision for microtonality in the piano roll?


r/linuxaudio • • 10h ago

ShairPort - Sync - How to play Apple Music on your Audio Systems

Thumbnail reddit.com
0 Upvotes

r/linuxaudio • • 12h ago

For Debian users, is anyone having issues with Waveform crashing especially for the Attraktive plug-in with expansion pack.

Thumbnail reddit.com
1 Upvotes

r/linuxaudio • • 3h ago

Open Cereal Workshop- a FOSS rewrite of FL studio in rust for linux and windows

Post image
0 Upvotes

I pre-compiled builds for Debian and Arch in the repository but you are welcome to compile from source for anything you want. Full instructions are in the GitHub read me

you will need the FL Studio free demo installer for Windows downloaded and the program will ask for the file at first startup and extract all of the audio and presets from it. I had to do this to get around Distributing proprietary IP as I don't want any legal trouble.

Please report any bugs on the GitHub as I am actively working on this project and will rapidly respond.

all of my paid and free fl studio plugins work, but I don't own a ton so I couldn't test a bunch of paid ones. can open and save in fl studio format.

https://github.com/areoseek/open-cereal-workshop


r/linuxaudio • • 23h ago

Which distro I should choose.

6 Upvotes

my laptop got 4gb ram I will be able to provide more detailed specs later.

I either go with xfce mint or ubuntu studio however I'm afraid that ubuntu studio may be more demanding than xfce mint but I have no clue how compatible xfce mint will be with daws.

Im planning to run MAINLY bitwig studio and maybe try running fl studio.


r/linuxaudio • • 21h ago

Not able to login via website to multiple Music VST plugin product managers

Thumbnail reddit.com
1 Upvotes

Need some help


r/linuxaudio • • 1d ago

Arturia Software Center update broke Wine9.21 installs

6 Upvotes

What version before:
Arturia Software Center V. 2.12.0.3157 updated itself to V 2.13.0.3440
and broke some WINE9.21 dependency, could not run Arturia VSTs anymore.

Solution: I successfully got it working with the new version in Bottles
with WINE Kron4ek-wine-11.8-amd64 and Windows10 as runner (Not saying this is the only possible WINE version, just saying with that one it worked. Didn't try others.)

Then had to copy/move my 3 Arturia VST3 files from the old WINE instance to the new Bottle one-
There are 3 folders to move:
> drive_c/Program Files/Common Files/VST3
> drive_c/Program Files/Arturia
> drive_c/ProgramData/Arturia
And then had to give the vst3 path to yabridge and run it again to create .so files.
DAW- Bitwig did not realize the vsts where moved, and all presets continued to work.
(My vst are Pigments, Filter Mini and Analog Lab V)

I hope this helps others..this "DRM Companions" are really a nightmare handcuffs.


r/linuxaudio • • 1d ago

Hushmic - Noise reduction made easy !

3 Upvotes

Hi,

First of all, not my work, so please give credit to the dev behind this piece of amazing software.

I'm running Linux CachyOS and I recently bought a new USB microphone.

After few days of twinkling with EasyEffects to reduce background noises and make my mic sound better, I was ready to give up.

But then I found this amazing software for Linux called Hushmic. It seems nobody talked about that so I decided to post and give some light to this and its dev.

The description is :

Real-time microphone noise suppression for Linux, as a system-wide virtual mic.
Open source, runs on the CPU, your audio never leaves the machine.

It uses DPDFNet which is way better than Krisp in my opinion.

So if you have trouble setting up your mic like I did, just give it a go.


r/linuxaudio • • 2d ago

REAPER ported to Wayland

Thumbnail forum.cockos.com
119 Upvotes

r/linuxaudio • • 1d ago

Easy Effects presets for dark speakers and bright earphones

Thumbnail reddit.com
2 Upvotes

r/linuxaudio • • 1d ago

Looking for recommendations on hardware and os for live performance rig.

6 Upvotes

I'm looking for hardware and OS recommendations for a live performance rig.

I want to buy or build something that's compact, rugged, and powerful enough to handle multitrack looping and DSP.

Instruments I'd use:

For the live instruments, I'll probably want to run some heavy real-time audio processing—neural networks, FFT pitch tracking, deeply nested VST plugins, etc. It needs to handle 32-bit audio at a 32-sample buffer / 48kHz, so it has to be pretty fast.

The chassis needs to be reasonably light but rugged. Something I won't be crying over if I accidentally drop it on stage, but still light enough that throwing it in my backpack and getting on the bus doesn't suck.

As far as OSes go, I've heard Ubuntu Studio is good? Looking for something lightweight with PREEMPT_RT support.

Software-wise, I prefer open source. Ardour and Giada seem like good options, plus finding some solid Linux-compatible VSTs.

Welcome all insights!


r/linuxaudio • • 1d ago

Ardour or reaper to record edrums?

1 Upvotes

Hello there,

Been a longtime cakewalk by bandlab user (now replaced by sonar I think), back then through wine, cakewalk was chill to record my edrum set.

In the meanwhile ive been reading a bit, and found out that both ardour and reaper can receive midi inputs from my drum modules in order to record. Unfortunately I haven't had any success with it.

Reaper detects my 2 edrum modules but doesn't show any action or light when I hit the pads.

Do I need to install steven slate plugin in order to record with reaper or ardour?

In my specific case, the 2 drum modules are connected with a midi (usb b) to usb on my laptop and then I join both inputs with qjackctl to turn it into a single input


r/linuxaudio • • 1d ago

EarBee

2 Upvotes

Found this exceptionally good music (works also with video) transcription tool. I was considering buying "Transcribe!" but I think I will save my money on this one. It's worth checking out!

https://earbee.org/


r/linuxaudio • • 2d ago

OpenRig 0.17: OpenRig now has its own effects (OpenRig FX)

Thumbnail gallery
11 Upvotes

r/linuxaudio • • 2d ago

Sidenote: Got UVI working, but not UVI Portal

1 Upvotes

Hi,

I could get some UVI libraries working under linux:
- What system: Mint 22.3/pipewire/cinnamon/X11
- What did not work: the UVI Portal. No UVI version (I tried a new from october and an old one from 2022) with *no* version of Wine (9.21 up to 11.0.35) did work.
- I could workaround this by:
- installing iLok, activating my licenses
- Then *copying over the actual libraries from windows 10 to mint 22.3 manually). In my case
Shade, Drum Designer, Souldrum, Asteroid. This are mostly older vst from ca 2019-2022. The later 3 required UV Workstation- I copied the vst3 to the related linux vst3 folder, then the normal process via Wine 9.21/Yabridge.

-Conclusion: For this older libraries, the blocker is just the UVI Portal, once again. And the new UVI portal is only not working (Black or white screen) as it uses this JUCE 8.0X version and hasn't upgraded to JUCE9. A patched WINE Version from a user Giang17 is existing, I didn't try that.
I am not sure, if all versions of UVI can be activated via iLok, or only this older ones.
Hope it helps someone, if they have yet older libraries around on the windows PC..there's a chance.


r/linuxaudio • • 1d ago

Device, a free open-source DAW. Version 0.1 is up for Linux if anyone wants to try it

Thumbnail gallery
0 Upvotes

I built a DAW called Device and just put up the first download, version 0.1. It's free, no subscription, and the source is open. There's a Linux build in the release, along with Mac and Windows.

You can arrange audio and MIDI, write in the piano roll, record, mix, and use your own VST3 and CLAP plugins. There are 44 instruments and effects built in, including a synth, a sampler, a drum rack and a pad sampler. When you're done you can bounce a mix or stems as WAV or MP3, or export the project into Ableton Live, returns and sends included.

A few honest Linux notes, because I don't want to oversell this. Audio goes through PipeWire, not JACK or ALSA directly. I have not run it on a real Linux sound card yet. CI does run it against real PipeWire streams, but that's not the same as your interface. Plugin editor windows use X11, so on a Wayland desktop that's XWayland. It's pre-alpha. Some things are still missing, and the project format may still change, so keep copies of anything you care about.

Downloads are here: https://github.com/devicedaw/device/releases/latest

Grab Device-linux-x86_64.tar.gz, or the aarch64 one if that's your machine, unpack it and run install.sh. The site is https://devicedaw.github.io/ if you want a look at the interface first.

If you get it running, or if it falls over on a real card, I'd like to hear about it in this thread. Feedback on PipeWire, plugin windows, and whether the basic arranging, recording and mixing actually hold up would help a lot.


r/linuxaudio • • 2d ago

REAPER on linux swaywm

Thumbnail reddit.com
1 Upvotes

r/linuxaudio • • 2d ago

Looking for Beta testers for Lullaby - a Free and Open Source resonance suppressor similar to Soothe 3 (VST / CLAP / AU) - with Linux support

4 Upvotes

Hi, I'm looking for beta testers for an open source resonance suppressor inspired by Soothe 3. I'm especially interested in finding people who use Linux.

Resonance Suppressors are used for cases such as snare ringing, harsh cymbals or vocals, whistling on distorted guitars, low-mid mud, finger squeaks on the fretboard, etc.

I decided to make it open source! I would be of great value to me if you Starred it on GitHub and opened any Issues you find.

https://github.com/amiran-gorgazjan/lullaby

Note that it is still in beta, so you'll likely find a few bugs and have some reservations about the behavior, I need your help to understand what is important and what to to prioritise.


r/linuxaudio • • 1d ago

Introducing plugsalot!

0 Upvotes

My first plugin is working exactly as I had hoped. Retro design, AI assisted plugin chains and settings, multipurpose Swiss army knife for home recording artists.

I've done mostly vox and mastering with it so far it's its working so well. We also have guitar amps under the hood. Just install your AI api and go nuts. Its free right now:

https://github.com/adinwalls/plugsalot/releases/tag/v0.3.2


r/linuxaudio • • 2d ago

UADx plugins on Linux - it IS possible!

12 Upvotes

Hello!

I posted earlier about any tips, but I was able to work it out! proof: https://imgur.com/a/HUAmjKD

A lot of assistance came from Claude Sonnet 5.5, and the following technical write-up is produced from it, as this was the result of several different sessions and trial/error.

UADx (Universal Audio) plugins on Linux: Wine + yabridge + Reaper

Getting UA Connect and the UADx plugins (LA-2A, Fairchild, Pultec, ...) to install, authorize and show a working GUI in a DAW through yabridge.

Tested with: Wine Staging 11.16 (system), the d2d1-dcomp Wine fork 11.0 (giang17's branch, packaged at /opt/wine-d2d1), yabridge 5.x, Reaper (native Linux, X11/XWayland), UA Connect 1.11.1, PACE License Support 5.10.5, WebView2 runtime 157.0.4341.60, Arch/CachyOS-style layout.

Honesty note. This is a record of what worked on one machine. Several fixes were applied in sequence and I did not isolate every one afterwards. Where something is a hypothesis rather than a verified cause, it says so. See "What is and isn't proven" at the end. Please report what works or doesn't on your setup.


TL;DR

#SymptomCause (verified unless marked)Fix
1UA Connect: "waiting for PACE software" / plugin says "open UA Connect"Fresh PACE/iLok licensing was not installed in a clean prefixUse a dedicated, clean prefix; install iLok License Manager and let UA Connect install PACE there
2"There was an issue with the ... download"Download works, extraction fails: the UA cloud helper needs a tar.exe and Wine has nonePut a Windows bsdtar.exe in the prefix as system32\tar.exe
3Same error persists after adding tar.exeTwo prefixes share the host's network. An old uacloudhelper.exe held port 4793 and the new UA Connect talked to itFully stop every Wine prefix, then run UA Connect from the new one only
4Electron: A JavaScript error occurred in the main process ... EBADF ... createWritableStdioStreamLaunched with no valid stdout/stderrLaunch through a wrapper that redirects stdio
5Plugin GUI blurry, unclickable, then gray after ~30 sUADx GUIs are WebView2 (Chromium). Its GPU process crash-loops (3 crashes, then the browser kills itself)Don't disable dcomp; use the patched d2d1-dcomp Wine; see flags below
6Reaper hangs when the plugin is removedThe Wine host dies mid-teardown (a consequence of 5)Fixed together with 5

0. Why this is hard (background)

  • UADx plugins are licensed through PACE / iLok. UA Connect installs and authorizes them; the plugins refuse to open unless UA Connect and PACE are running in the same Wine prefix.
  • Each plugin's GUI is an embedded WebView2 (Edge/Chromium). In the plugin log you will see UAPW_WebView: WebView2Loader.dll runtime used.
  • UA Connect is an Electron app and runs a separate uacloudhelper.exe that does downloads, extraction and license sync over a local socket.
  • Wine shares the host's network stack. Two prefixes running UA Connect at the same time will collide on local ports.

1. Use a dedicated prefix

export WINEPREFIX=$HOME/.wine-ua-connect
wineboot -u

Keep UA Connect, PACE and the UADx plugins together in this one prefix. Install, in this order:

  1. iLok License Manager (from ilok.com).
  2. UA Connect (from uaudio.com), then sign in.

UA Connect then installs PACE License Support itself. In .../AppData/Local/Universal Audio/Logs/UA Connect.log you should see:

(pace-install) PACE software 5.10.5 installed
(app) verify pace account: result 'valid-link'

If you instead see verify pace account: waiting for PACE software on every launch, check the PACE daemon log:

$WINEPREFIX/drive_c/ProgramData/PACE/Eden/LdLogs/LdLog_*.txt

A repeated line Machine bindings strong/weak match was NOT found for v3 algorithm. Strong matches: 0; Weak matches: 7 appeared in my logs both in the prefix that failed and in the one that worked, so it was not the blocker in my case. (My early hypothesis that Wine cannot expose SMBIOS IDs for PACE's fingerprint did not turn out to matter.)

2. Add tar.exe (fixes "issue with the download")

Symptom, in UA Cloud Helper_*.txt:

ASSERT: utilityPath.size() > 0            (Auth_FileIO.cpp: processExtract)
processExtract - threw exeption  CreateProcess failed: File not found.
BundleExtractionFailed('uaudio_...'): 'auth.download_extraction_tar_error'

The .tgz downloads fine; extraction fails because no tar.exe exists. Windows 10+ ships System32\tar.exe; Wine does not. Put a Windows bsdtar.exe (libarchive) in the prefix as:

$WINEPREFIX/drive_c/windows/system32/tar.exe

(I used a 32-bit PE bsdtar; it ran fine in the 64-bit prefix.) This is a third-party binary: take it from a source you trust.

3. Make sure only one prefix runs UA Connect

After step 2 the same error returned, because the helper log being written was in the old prefix. The new UA Connect had failed to bind port 4793:

failure trying to listen on port 4793: system_error 10013 (system): bind: Access denied
Ntwk_Server::StartServer(_uaauthd._tcp.) - failed to open port.  trying again on 0

Fix: stop everything, then start only the new prefix.

WINEPREFIX=$HOME/.wine        wineserver -k   # every other prefix running UA/PACE
WINEPREFIX=$HOME/.wine-ua-connect wineserver -k

(wineserver -k closes every Windows app in that prefix. Save first.)

To check which prefix a process belongs to:

tr '\0' '\n' < /proc/<pid>/environ | grep WINEPREFIX

4. Launching UA Connect: valid stdio (Electron EBADF)

Launching from a menu entry (no terminal) gave EBADF ... createWritableStdioStream because stdout/stderr were closed. Use a wrapper:

#!/bin/sh
# ~/.local/bin/ua-connect-wine
mkdir -p "$HOME/.cache"
export WINEPREFIX=$HOME/.wine-ua-connect
export WINEDLLOVERRIDES=dcomp=d          # UA Connect itself is happy this way
cd "$WINEPREFIX/drive_c/Program Files/UA Connect" || exit 1
exec "$HOME/.local/bin/wine-yabridge-dispatch" 'C:\Program Files\UA Connect\UA Connect.exe' \
    </dev/null >>"$HOME/.cache/ua-connect-wine.log" 2>&1

Point the .desktop file's Exec= at that script (inline sh -c '... >log 2>&1' is rejected by desktop-file-validate; the wrapper avoids the quoting problem). Do the same for the iLok License Manager entry if you want one:

[Desktop Entry]
Name=iLok License Manager (.wine-ua-connect)
Exec=env "WINEPREFIX=/home/you/.wine-ua-connect" /home/you/.local/bin/wine-yabridge-dispatch "C:\\\\Program Files (x86)\\\\iLok License Manager\\\\iLok License Manager.exe"
Type=Application

5. The plugin GUI: WebView2 crash loop

5a. What was wrong

With stock Wine the plugin GUI was blurry and unclickable, then gray after about 30 seconds. The plugin log (UAPW_*.txt) looked healthy:

Opening plugin editor
WebView2Loader.dll runtime used
pageFinishedLoading
GUI State: RESOLVED
... ~30 s later ...
ClientSockets@warn  ReadHandler: ..., 2, End of file

It reports success, then the GUI's socket to the plugin times out. The actual cause is visible in WebView2's crash dumps:

$WINEPREFIX/drive_c/users/<you>/AppData/Local/Universal Audio/workspace/
    webview_storage/yabridge-host/EBWebView/Crashpad/reports/*.dmp

Reading them (minidump: exception code and faulting module) showed:

  • exception code = 0x80000003 (a Chromium CHECK/breakpoint) in msedge.dll
  • ptype = gpu-process, with --gpu-recent-crash-count=1,2,3
  • then a ptype = browser dump: Chromium gives up after three GPU-process crashes and kills the browser, which freezes the GUI.
  • dcomp.dll (DirectComposition) was loaded in the crashing GPU process.

A quick signal that you have this problem: top shows a crashpad_handler at 100% CPU for a while after you open a plugin.

5b. What fixed the GUI

Three changes together. I did not test every subset, see the last section.

(i) Do not disable dcomp for the plugin host. I had set WINEDLLOVERRIDES=dcomp=d (a common workaround for Electron/Chromium under Wine, and it is what UA Connect itself is fine with). For the plugin host this was counterproductive: removing the override is what made the UI appear.

(ii) Run the prefix under a Wine that implements DirectComposition. I use the d2d1-dcomp fork of Wine (giang17's d2d1-dcomp-11.0 branch), installed in isolation at /opt/wine-d2d1, which implements DCompositionCreateDevice. Stock Wine returns E_NOTIMPL for it. The system Wine remains the default. Packaging/instructions: https://github.com/mklnln/wine-d2d1-dcomp

Hang on plugin removal: with stock Wine, removing the plugin from the FX list hung Reaper. yabridge-host.exe became a defunct process (ps state Zl) with 32 threads still sleeping on pipes, and the plugin log showed UADispatchWin: failed to post a message! Error 1400 (invalid window handle) during teardown. Recovery was WINEPREFIX=... wineserver -k. It was fixed after switching to the patched Wine; I believe, but did not prove, that it was a consequence of the browser crash loop.

(iii) WebView2 flags. WEBVIEW2_ADDITIONAL_BROWSER_ARGUMENTS is read by the embedded browser. My final working value:

--in-process-gpu --disable-gpu-sandbox
--disable-features=CalculateNativeWinOcclusion
--disable-backgrounding-occluded-windows
--disable-renderer-backgrounding
--disable-background-timer-throttling

--in-process-gpu --disable-gpu-sandbox removes the separate GPU process that was crash-looping. The occlusion/throttling flags target Chromium treating the Wine window as hidden (my hypothesis for the page not sending traffic).

6. Per-prefix Wine and flags through yabridge

yabridge uses a single Wine binary unless you set WINELOADER. Launch your DAW with WINELOADER pointing to a dispatcher that picks the Wine per prefix:

#!/bin/sh
# ~/.local/bin/wine-yabridge-dispatch
p="${WINEPREFIX%/}"
case "$p" in
    */.wine-ua-connect)
        # UADx GUIs are WebView2 (Chromium). Flags live in a file for easy A/B testing:
        f="$HOME/.config/ua-connect-wine/webview2-args"      # one line
        if [ -r "$f" ]; then WEBVIEW2_ADDITIONAL_BROWSER_ARGUMENTS="$(head -n1 "$f")"
        else WEBVIEW2_ADDITIONAL_BROWSER_ARGUMENTS="--in-process-gpu --disable-gpu-sandbox"; fi
        export WEBVIEW2_ADDITIONAL_BROWSER_ARGUMENTS
        # Skip the dcomp override if this marker file exists (patched Wine implements dcomp):
        [ -e "$HOME/.config/ua-connect-wine/no-dcomp-override" ] || \
            export WINEDLLOVERRIDES="${WINEDLLOVERRIDES:+$WINEDLLOVERRIDES;}dcomp=d"
        exec /opt/wine-d2d1/bin/wine "$@" ;;      # patched d2d1-dcomp Wine
    *)  exec /usr/bin/wine "$@" ;;                # system Wine for everything else
esac

Start the DAW with WINELOADER=$HOME/.local/bin/wine-yabridge-dispatch.

A prefix can only run one Wine version. wineserver must match the Wine that talks to it. UA Connect and the bridged plugins share this prefix and this dispatcher, so both move to the patched Wine together. The patched build (11.0) was older than the prefix's last writer (11.16). That is not officially supported. Back up the prefix first, e.g. cp -a ~/.wine-ua-connect ~/.wine-ua-connect.bak, and be ready to roll back by restoring it and pointing the dispatcher at the system Wine.

Verify that the flags actually reach the plugin host while a plugin is open:

pid=$(pgrep -f 'yabridge-host.exe.so' | head -1)
tr '\0' '\n' < /proc/$pid/environ | grep -E 'WEBVIEW2|WINELOADER|WINEPREFIX|WINEDLLOVERRIDES'

Environment is fixed when the host process starts: after any change, quit the DAW, run WINEPREFIX=... wineserver -k, and relaunch.

7. yabridge configuration

  1. Add the plugin folder to yabridgectl and sync:

    yabridgectl add "$HOME/.wine-ua-connect/drive_c/Program Files/Common Files/VST3"
    yabridgectl sync
    
  2. yabridge.toml belongs next to the bridged .so/.vst3 files, i.e. ~/.vst3/yabridge/yabridge.toml, not inside the Wine prefix. Only the first yabridge.toml found is used, and the first matching section wins. (I first put it in the prefix, where yabridge never reads it.)

    Options I tried for the UADx plugins:

    ["uaudio_*.vst3"]
    #group = "uaudio"                 # one shared host: untested for load time
    #editor_double_embed = true       # did not help the gray window
    

    Neither was needed in the end. They are optional experiments.

8. Debugging toolbox (what actually produced useful messages)

WhereWhat it tells you
.../AppData/Local/Universal Audio/Logs/UA Connect.logPACE install and verify pace account result
.../Logs/UA Cloud Helper_*.txtdownloads, extraction (ExtractAndStage), port binding
.../Logs/UAPW_<plugin>_*.txtper-plugin load timeline, WebView2, GUI state, socket timeouts
.../ProgramData/PACE/Eden/LdLogs/LdLog_*.txtPACE license daemon
.../webview_storage/yabridge-host/EBWebView/Crashpad/reports/*.dmpWebView2 crashes: exception code, process type, faulting module
~/.cache/ua-connect-wine.logUA Connect stdout/stderr from the launcher
top while opening a plugina crashpad_handler at 100% CPU means something is crashing
/proc/<pid>/environwhat environment a process really got
ps -o stat on yabridge-host.exeZ / defunct means the host died but the DAW still waits

Optional yabridge debugging when needed: YABRIDGE_DEBUG_LEVEL=1 YABRIDGE_DEBUG_FILE=$HOME/yabridge.log reaper.

Do not leave --remote-debugging-port / --remote-allow-origins=* in the flags. They expose Chromium's DevTools port to any web page you open on the same machine. Use them only briefly for debugging, and without the --remote-allow-origins=* part if you can.

9. What is and isn't proven

Verified from logs/dumps on my machine:

  • The download failure was extraction (tar.exe missing), not networking.
  • Two prefixes shared the UA cloud helper's port, so the old helper answered.
  • The WebView2 GPU process crash-looped (0x80000003 in msedge.dll), then the browser process died.
  • The UI works with the combination of: patched Wine, no dcomp=d for the plugin host, and the flags above.

Not isolated (treat as hypotheses):

  • Which of {patched Wine, no dcomp override, --in-process-gpu, --disable-gpu-sandbox, occlusion flags} is strictly required. Removing the dcomp override on stock Wine was enough to make the UI appear, but the hang on plugin removal only went away after moving to the patched Wine.
  • That the Chromium occlusion flags matter at all.
  • That dcomp DirectComposition is the root of the GPU crash (it was loaded in the crashing process, which is suggestive, not proof).
  • Why the first GUI load is still slow (about 5 s from editor open to pageFinishedLoading in my logs; more before the plugin starts logging). Grouping the UA plugins into one yabridge host was meant to share WebView2 start-up cost; it was not measured.

If you can bisect the flags (one at a time, restart the DAW and run wineserver -k between tests, watch the Crashpad/reports folder) please share the minimal set that works.


r/linuxaudio • • 3d ago

Drumlabooh 14.0.0 is out! (Free hybrid sampler/synth drum machine plugin)

Post image
23 Upvotes

Drumlabooh 14.0.0 is out! (Free hybrid sampler/synth drum machine plugin for Linux and Windows)

https://psemiletov.github.io/drumlabooh/

Until now, it was a dedicated multi-format sampler (supporting Drumlabooh, Hydrogen, and SFZ kits). In v14, I've added a built-in procedural synthesizer engine alongside the sampler. So, what's new?

- Procedural synth engine and 3 synth kits: OM Kit (old-school Goa Trance), RITM (80s electro), and Golden Farthing (a true sound producer's secret weapon).

- Multi-threaded kit loading: Rewritten to load heavy kits much faster (uses half of your CPU threads to avoid overheating).

- New "Live" knob and updated FX order: The internal FX chain is now Filters -> Live -> Analog saturator. Tweak the new Live knob with active filters to turn static one-shots into dynamic, organic performances.

- UI zoom and workflow tweaks: Added interface scaling (zoom in/out), quick 3-digit preset selection by clicking on slot names, and a new Info button to view the active drum kit's backstory and notes.

- Drumkit format v2.0: Updated official kit library and specifications.


r/linuxaudio • • 2d ago

Audivane DSP: system-wide PEQ, convolution and up to 4M-tap upsampling for PipeWire, with the DAC clock driving the graph (beta, AGPL)

Thumbnail gallery
0 Upvotes

Hi r/linuxaudio. I've been building a system-wide DSP app for PipeWire, now at its first public beta, so I'm looking for people to try it out and potentially break it. I'm currently the sole developer.

A bit of background: I'm a two-channel "audiophile", not a producer. When I got into DSP for audio playback, I found that good upsampling filters (flat to 20 kHz, fully attenuated by Nyquist) were hard to get for free. The well-known ones in my circle, HQPlayer and PGGB, are either not FOSS or don't run on Linux. I also wanted a good GUI and filters in the millions of taps, so I tried to make one.

What this app does

  • Parametric EQ: L+R, L and R sections, RBJ biquads in f64. Imports AutoEQ / Equalizer APO ParametricEQ.txt, with target and measurement overlays.
  • Convolution: WAV impulse responses (room correction, crossfeed), non-uniform partitioned FFT convolution, IRs resampled offline whenever the rate changes.
  • Upsampling: ×2 to ×16 or "up to 768 kHz", 16k to 4M taps, linear or minimum phase, with more in development. The plots show the measured response of the filter the engine will actually run, not a textbook sketch.
  • Output: S16/S24/S32 with TPDF or noise-shaped dither, applied exactly once at the end. Hardware or digital volume.
  • Routing: system-wide or per app, plus a second sink, Audivane Direct, that passes samples to the DAC untouched (the UI tells you whether bit-perfect is actually intact, or why not).
  • A/B: compare your current settings against flat (no EQ, no convolution) or another saved preset, level-matched with A-weighting, ~10 ms crossfade.

Everything is in one desktop app (Tauri + React; Rust engine as a systemd user service), so you don't need to edit config files to set it up.

Why the engine takes over the DAC

Ordinary PipeWire filters run at the graph's rate, so a 44.1 kHz track going to a 176.4 kHz DAC gets resampled by PipeWire before any upsampler sees it. Audivane opens the DAC directly and drives PipeWire from the DAC's own clock instead, so the upsampler works on the original samples and there's no extra resampler in the path. While the engine runs, it holds the DAC exclusively. When something else needs the DAC, Release DAC to the system in the Device view hands it back to PipeWire and the engine idles; Take the DAC back resumes.

Upsampler performance

The upsampler inserts zeros between samples to raise the rate, then removes the mirror images above Nyquist with a long low-pass filter, computed with FFTs. Doing it directly would take ~9 billion multiply-adds per second for 100k taps at ×16. Numbers from the built-in benchmark, stereo, 44.1 → 705.6 kHz (×16), one core of an EPYC 7402P (a 2019 Zen 2 server CPU at 2.8 GHz base; a current generation pc core should be faster): If you try it, I'd love to see numbers from your machine, the status bar at the bottom shows DSP load.

Comparison with other well-known options

Audivane DSPEasyEffectsCamillaDSP
Where it runsEngine that drives PipeWire from the DAC clockFilters inside the PipeWire graph
Sample rateDAC follows the source; upsampling at integer ratiosWhatever rate the graph runs at
Precisionf64f32
UpsamplingBuilt in, 16k–4M taps, Kaiser β10-24No (PipeWire resamples)
ProcessingPEQ, convolution, ditherLarge effects rack, mic effects too
ChannelsStereoStereo
SetupDesktop app, distro packagesDesktop app
PlatformsLinuxLinux

So if you need multichannel crossovers or macOS/Windows, CamillaDSP is the better. If you want compressors, limiters or mic processing, EasyEffects is better.

Audivane is for a stereo playback chain into a DAC, where you want EQ, convolution and high-performance upsampling without the graph resampling first and without writing config.

Install

Packages for Arch, Ubuntu 24.04+/Debian 13+ and Fedora 40+ are on the releases page, with SHA-256 sums. After installing: systemctl --user enable --now audivane-dsp, then open Audivane DSP from your menu. avdsp upgrade updates it.

What I'm looking for

I use it daily on Arch with PipeWire 1.6 and a Fosi ZH3, the Ubuntu and Fedora packages have been built and tested for installation, but they don't have real user yet. If you run into any issues, reports with your DAC model, distro and PipeWire version would help a lot, especially for problems with rate switching or devices that refuse certain formats.

Also don't judge my EQ profile please, room mode is a pain, and I'd recommend 16k taps linear phase to start. And yes this is developed with AI help.