r/miniatures • • Nov 22 '22

Discord Server!

51 Upvotes

Good day everyone!

I've gone ahead and created a discord server for those who would like an open space to talk about miniatures!

Here's the link: https://discord.gg/6VvGHSmqM2

ETA: link shouldn't expire anymore


r/miniatures • • 10h ago

Would you be happy to get this in a swap?

Post image
152 Upvotes

I'm participating in a 1:12 swap for the first time. The theme is centerpieces and the guideline is that it should be something that would sell for $12-15 at a miniatures show. I went with a 2027 New Years theme (to celebrate 2026 ending); the top hat has disco ball beads and foofy things. I made some hats and a horn to go with it, so it's a whole thing.

I have to make six more of these so I'm refining it before I go into factory mode. I don't think the contents of the top hat are working 100% yet, but I'm sure I can figure it out. I have lots of hats!

The problem is, I ordered some 1:12 champagne bottles and flutes, but they will not get here in time for me to make the shipping deadline. Should I panic-buy the less-great champagne options from Amazon, or is this an adequate swap so I can just skip it? I'm in an anxiety spiral over this. I don't want to disappoint anyone, but I may have lost all perspective at this point.


r/miniatures • • 4h ago

how do you guys make tiny tech details look realistic without going insane

11 Upvotes

My brain is fried from staring at Python all day every day and I needed a project with zero screens. So I'm building a miniature version of the home office I've been neglecting. Got the shell framed up with balsa wood and it went together fast, which felt good after weeks of debugging stuff that breaks for no reason.

The desk is where I'm having fun. I want a tiny standing desk setup with a monitor on a riser and a keyboard at the right height. The monitor frame is cut from thin plastic sheeting and I painted the screen dark blue-grey to look like an IDE. The keyboard is where I'm stuck. I tried scoring lines into black styrene but it looks like a child scratched it with a fork. I need something that reads as individual keys at 1:12 scale without losing my mind.

The chair is a whole other problem. Real office chairs have that mesh back material and I can't figure out what to use. I tried stretching old pantyhose over a wire frame but the tension pulled it crooked. Also want to add a tiny whiteboard with pseudo code scribbled on it. Thinking thinned white paint on a glossy card scrap with a fine tip pen.

What do you all use for tiny tech details that need to look precise?


r/miniatures • • 1d ago Bravo

OC How I made my fireplace

Thumbnail
gallery
683 Upvotes

A few people asked me how I made it so….

For the fireplace that I made, I used regular Styrofoam and cut it to size, for the arch I just used a bowl from my kitchen and made a half circle. I used my Dremel with a sanding disk(?)to hollow out the center using the left and right sides of the half circle as a guide for how wide I wanted it then I added two more pieces of styrofoam to the left and right to make it look thicker and glued them together with Aleena’s fast grab glue then stuck toothpicks into the center of them so that they would stay in place. I then made the mantle using styrofoam. I covered the entire fireplace with Mod podge and let that sit until everything was dried.

For the stones, I used a brown paper bag and crumpled it up into a ball multiple times until it became very wrinkly and soft. The more you wrinkle it up the better it looks on the paper when you paint it. I just used regular craft paint and I put the paint on the top of my paintbrush to about half way up the brush and then I applied the paint onto the paper. When the paint thins out on top turn the brush over and use the other side. I added more paint as I went till I liked how it looked. It’s super easy to do. You can do it in any color that you like and it’s absolutely gorgeous.

After the paint dries, tear up the paper into small pieces. Make some larger and some small, you want a variety.

I used beacon 3 in 1 advanced craft glue to glue the stones down to the Styrofoam fireplace. I like that craft glue because it’s super tacky, but you have a few minutes to manipulate your placement of the paper so that you get it just right, I use that a lot in my different crafting. After I glued all the stones, I put another coat of Mod podge over the entire fireplace.

For the grout between the stones, I used mosaic grout, but you can use any kind of grout. It was originally white, and I just added some black paint to it to make it gray then I put it in a craft bottle and then squeezed out the grout in between each and every stone, letting it dry then I used a wet/semi wet rag to wipe the entire fireplace down to smooth the grout. Get the smallest jar of grout you can find, it goes a long way. Then I applied the last coat of mod podge.

After everything was dry, I added the wood to the top and sides of the mantle. I then used a small metal fork to add scratches and dents to the wood. I used brown craft paint that I thinned with water and when that was dry I used a small makeup sponge and dry brushed some black paint. I used mod podge to seal the wood and the very last thing I added was the decorative front. It is a dollhouse curtain valance that I 3d printed, but you can use anything you like or just leave it plain.
I’ve used this technique on a few other dollhouses I’ve made for walkways, stone work, bricks, on houses and water wells. It’s very easy to learn and so pretty.


r/miniatures • • 1d ago

Midnight Izakaya 🍶

Thumbnail gallery
110 Upvotes

r/miniatures • • 2d ago Bravo

I made a miniature of Dr. Lecter's prison cell.

Thumbnail
gallery
1.3k Upvotes

r/miniatures • • 1d ago

Made a fireplace for a new house I’m working on.

187 Upvotes

r/miniatures • • 23h ago

Changing just one eye size on a dollhouse shop sign

1 Upvotes

I'm sketching a dollhouse toy-shop window where the owner has stuck eyes on the hanging OPEN sign. From across the room it should look as if the sign is looking at the miniature front door. Up close, I'd like it to be obvious that there's one crooked eye and the sign is just hanging on a bump in the wood.

I'm working from a craft-eye pack that lists five sizes. The 6 and 8 mm sizes look close in the listing, but on the scale of the little sign I think the difference might read as a mistake immediately. I'm trying to decide whether that ruins the effect.

My first thought was to make the pupils line up and move the larger eye to the edge nearest the door. Now I think the mismatch would be more believable if the little sign were slightly turned, so that from the intended angle the large eye is farther away. That gives it two ways of being off by just a little.

If you build rooms that are meant to be seen straight on but still reward looking from the sides, how do you decide which odd detail to build into the object and which one to get from the angle?


r/miniatures • • 2d ago

OC I rolled every one of these tiny potatoes by hand, and the chicken is keeping an eye on them : )

211 Upvotes

My tiny farmhouse pantry is officially overflowing: eggs, potatoes, pumpkins and beans


r/miniatures • • 2d ago Heartwarming

Christmas!!

Thumbnail
gallery
509 Upvotes

My sis and I FINALLY finished a house our grandpa bought us 30 years ago!


r/miniatures • • 2d ago

Apothecary shop (work in progress)

Post image
168 Upvotes

Making an apothecary shop. The bookcase with the books will be against the other wall when it's complete. I'll probably stain the chair darker, wasnt thinking on that one.


r/miniatures • • 2d ago

Some beds I made over the weekend.

Thumbnail
gallery
44 Upvotes

The princess one is simply darling!


r/miniatures • • 3d ago

OC A tiny Chinese comfort meal! Red-braised pork belly (Hong Shao Rou)

Thumbnail
gallery
458 Upvotes

1:12 scale, made with polymer clay


r/miniatures • • 2d ago

Miniature dollhouse lady's writing desk (from FAO Schwarz)?

Post image
19 Upvotes

r/miniatures • • 3d ago Bravo

OC My first miniature!

Thumbnail
gallery
1.4k Upvotes

I wanted to try to make a miniature armchair from scratch because I love mini stuff and I want to make a 1:12 scale room. I had so much fun! Cant wait to continue doing more!


r/miniatures • • 3d ago

"I just designed and 3D printed this 1:12 scale modern kitchen sink cabinet!")

Thumbnail
gallery
82 Upvotes

New 1:12 scale 3D-printed miniature kitchen sink!

Sharing the latest piece from my modern miniature collection. It’s a static model made of separate parts (plinth, countertop, cabinet, side panels, sink, and faucet), which makes it super easy to mix and match colors for a custom look.


r/miniatures • • 3d ago

I justified the laser!

Post image
272 Upvotes

Back in June, I impulse-bought a cheap laser engraver/cutter.

Life has been very 2026 since then, so I’m only getting around to playing with it now.

I have been on a quest to make a good miniature Christmas tree, and took a detour into trying to make a vintage-looking felt tree skirt.

THIS THING CUTS FELT.

It cuts tiny tree pieces from felt. Proof of concept shown in photo.

The aqua tree is synthetic felt and has clean edges. I will be using that going forward.

The sectioned trees are cut from felt from an old Bucilla ornament kit (it’s what I had in reach); it’s a bit too fluffy and it’s part wool and smells like burning hair. The scent memory is “1980s curling iron with a baked-on residue of hair spray left plugged in.”


r/miniatures • • 4d ago Bravo

OC Tiny candles!

Thumbnail
gallery
1.2k Upvotes

Current project - witchy shop.

Had this little wooden display shelf off Temu & figured it would be useful for something(??)
Looking at inspo on Pinterest of life size witchy shops & boom! Idea! Spell candles display!
Never made candles before so thought I’d paint toothpicks? nah too messy. Then remembered I have fimo. Cool!
Roll, bake, cut, drill hole, glue a little bit of thin white wire. 54 tiny candles later… done!
Also added inserts into my display shelf & sanded & stained it too.


r/miniatures • • 3d ago

Just started making miniatures

Thumbnail
gallery
304 Upvotes

So I’ve been playing about with polymer clay and a bit of balsa wood recently and found a love for miniatures here is the first thing I made a couple of weeks ago


r/miniatures • • 3d ago

1/12 scale Soda Crate

55 Upvotes

Made a mini soda crate today. Made it look old and worn


r/miniatures • • 4d ago

Handmade Miniature Sourdough Slices! 🍞💛

Thumbnail
gallery
191 Upvotes

Here are some loaded up sourdough slices I made all out of polymer clay! These were pretty fun to make. Especially the egg with the runny yolk 😊


r/miniatures • • 3d ago

Instruction manual

Post image
6 Upvotes

r/miniatures • • 4d ago

Polymer clay macarons

Post image
254 Upvotes

I'm playing around with different miniature sweets. I'm also going to add a ribbon that was unwrapped.


r/miniatures • • 4d ago

Potatoes I made for my wood crates

366 Upvotes

Trying my hand at making miniature produce for some wood crates I made recently.