r/modelmakers • • 4d ago

The Weekly Small Questions Thread! Got a burning question? Looking for some tips on your build? Ask away!

0 Upvotes

The Weekly Small Questions thread is a place for everyone in /r/modelmakers to come and ask questions. Don't be shy.

You might have a burning question you've been meaning to ask but you don't want to make your own thread, or are just seeking some input or feedback from your fellow builders! This thread is aimed at new builders, but everyone is welcome.

If you haven't, check out our local wiki and the "New to the hobby" thread, which might be of help to you!


r/modelmakers • • 2h ago

GROUPBUILD my first model

Thumbnail
gallery
78 Upvotes

L2A4 and T72B3


r/modelmakers • • 7h ago

WIP Lend Lease M3A1 Scout Car, 1/35, Tamiya

Thumbnail
gallery
171 Upvotes

US vehicles are not what I usually build but I saw the M3A1 vehicle in Soviet service and I figured I might try something new. Jeep doesn’t have option for soviet markings but given it has no markings at all it’s not hard to convert it into Red Army vehicle., For both vehicles I opted for Soviet 4BO paint job, even if M3A1 has call out for US olive drab. My reasoning is that even if it was delivered with US paint job by this point it would have been repainted with Soviet ones already during some maintenance (plus I know how to paint 4BO but not US paint).

 

M3a1 is a pretty solid kit. Not that complex and it builds nicely with few fiddly parts. There were some fit issues but given that it’s with large pieces I can’t say if it’s molding issue of if parts simply got warped after production. What I specially appreciate is that if parts need to be put together at certain angles you get a drawing of how it’s supposed to look rather than just guesswork. Vehicle itself had 3 machine guns, one M2 and two M1919, but kit lacks one M1919. Luckily the jeep had option for either M2 or M1919 so I used the spare from that. I had to improvise the mount, though. Also there is, IMO, to few ammo boxes, you’d expect such vehicle would have more of them. I had some in my stash so I used those. I also added couple of tarps.

 

I may have overdone it with dust weathering………

 

(At this point machine guns, driver’s seat and steering wheel are not yet attached and MG ammo boxes are also not in place, that will be done properly once figures are done so I can position them better)

(marked WIP because it's not quite finished and it's only first part in larger build)


r/modelmakers • • 5h ago

Completed Eduard 1:72 Bf-109 G-14

Post image
81 Upvotes

r/modelmakers • • 59m ago

Completed 1/72 piper j-3 cubs Kovozavodt

Thumbnail
gallery
13 Upvotes

So, Ive finished two pipers today. Difficult models, nothing fancy, there were errors in instructions, parts did not fit very well, but I really wanted to do both bazooka charlie and one on the floats. Despite my efforts one on the floats is on a wonk. Also on olive drab one decals are too small, but I could not find better ones so I judt left them. Based on photo Ive tried to add deterioating invasion stripes. So thers that, nice planes, bad models.


r/modelmakers • • 6h ago

Help - General Can this be salvaged? Its one coat of humbrol clear gloss that has been brush painted over AK paints

Post image
27 Upvotes

r/modelmakers • • 16h ago

Completed Vipers 🐍

Thumbnail
gallery
166 Upvotes

Both 1/48 by Tamiya 🍻


r/modelmakers • • 17h ago

Completed Hobbyboss T29-E4 1/35

Thumbnail
gallery
167 Upvotes

hope you guys like it! took me around 3 weeks to complete and the dust is made from dirt from my garden.


r/modelmakers • • 1d ago

Completed Incredible work I saw at local model competition

Thumbnail
gallery
814 Upvotes

To be clear, these are not my models.


r/modelmakers • • 43m ago

PSA PSA: Megahobby is under new ownership.

4 Upvotes

Megahobby is back and under new owners as per the website. Was a nice surprise to see.


r/modelmakers • • 21h ago

Completed Brought to you by apoxie-sculpt: Wolfpack (Academy) F-22 (1/72)

Thumbnail
gallery
100 Upvotes

This thing tested me. Legitimately threw it away it pissed me off so much, and then i fished it out of the dumpster like two days later because I couldn’t get it out of my head (at least the bin had been empty to that point with everything in the box, if you were wondering).

The inlet geometry was outright baffling. Why they thought to use the interior mold of the weapons bay for a part of that is a mystery that required some very thin cardstock to solve. The gaps were horrible. Packed it all with apoxie sculpt and managed not to reshape the whole thing. Bay door fit was also pretty trash, that required filling and re-scribing. At least the gear doors were okay. The rest of the fit was okay with a little trimming at the forward fuselage join.

She’s mostly closed up, partly to just admire the lines, and partly to hide all of this kits egregious sink marks. Not a door or panel untouched. Beautiful engraving and then BAM!

But after all of that, the paint is what nearly pushed me to quitting. MRP has great paint, but the contrast was all wrong. I used a ton of reference photos to get it close, and ultimately the winning combination was to put tamiya smoke over the top of the darker camo sections and snow powder over the edges to get the reflectivity right.

I don’t know if I’ll do another raptor unless there is a legitimate brand new tool from tamiya or academy. This design is less than great, the 48 I love kit has weird inaccuracies and a glaringly bad cockpit, and the 48 hasegawa has an equally bad inlet geometry with landing gear that cant support the weight.

Hope you enjoy. I can’t say I did, but at least it’s done.


r/modelmakers • • 16h ago

WIP K-2S0 Build so Far

Post image
42 Upvotes

I managed to route all the wiring through the body keeping articulation. Soldering those hair thin wires was crazy. The eyes still light up!

Next, weathering the torso.


r/modelmakers • • 23h ago

Completed Tamiya Panzer 38-t

Thumbnail
gallery
78 Upvotes

Great little kit. This was my first time trying a winter wash, first time paint with an airbrush and a few more firsts.

Chipping is easy to get out of hand with. Lesson learned. Still a fun build, highly recommended.


r/modelmakers • • 12h ago

Completed Ford mustang

Thumbnail
gallery
10 Upvotes

My handmade custom model car!


r/modelmakers • • 3h ago

Help -Technique Decals

Post image
2 Upvotes

Hi, so I put these decals now also set with softener and fix.
After drying i see it is almost same as base color. I cannot see it properly.
How to fix this?


r/modelmakers • • 8m ago

Help - Tools/Materials Clear coat canopy after painting?

0 Upvotes

I am looking for a product to clear coat a painted airplane canopy, to protect the paint, and also give it a little more of a shine/gloss.

I've looked at Quick Shine (replacement for what used to be future), but I'm apprehensive. I've also looked at AK interactive gauzy glass coat, which seems a little more promising.

However, I'm not sure if either or these products can be applied AFTER I've already painted the canopy frame.


r/modelmakers • • 1d ago

Completed 1:24 Scale "Love Machine"

Thumbnail
gallery
94 Upvotes

r/modelmakers • • 1d ago

Completed Eduard 1/48 Fw190 A-5

Thumbnail
gallery
206 Upvotes

This was a quick out of the box profipack build


r/modelmakers • • 2h ago

Help - Tools/Materials Tabletop Magnifier Suggestions?

1 Upvotes

Hey everyone. Couldn't find this in the FAQ section.

My eyes are not what they used to be so I'm looking for a desktop lighted magnifier. Specifically I'm curious about the magnifying strength. I assumed that more is better, so 10X magnification for example would be better than 5X. Some research tells me that for hobby modelling, that 2X - 3X is actually the best.

For reference, I typically do 1/35 scale military modelling.

Can anyone give me their experience with these before I buy?


r/modelmakers • • 2h ago

Completed Aquilifer im Kampf

Thumbnail
gallery
0 Upvotes

Aquilifer der LEG XVII im Kampf, Teutoburger Wald 9 n Christus Varusschlacht. Weitere Figuren werden folgen. Germanen und Römer.


r/modelmakers • • 2h ago

Completed Aquilifer der LEGXIII

Thumbnail
gallery
0 Upvotes

Aquilifer der LEGXIII im Marsch zur Zeit des Augustus ca 6 n. Christus. Weitere Figuren im 28mm werden folgen.


r/modelmakers • • 1d ago

Completed My Tamiya 1/35 Panzer IV Ausf. F – Afrika Korps

Thumbnail
gallery
81 Upvotes

Just finished my Tamiya Panzer IV Ausf. F!

This is only my second tank since I started scale modelling, (I’ve been doing some fighters and jets) so I’m still learning a lot and trying to improve with every build.

The whole tank was painted by hand using brushes, except for the final varnish, which I applied with Vallejo spray varnish.

For the weathering, I used some AMMO by MIG products, including their Afrika Korps Wash. I also used dry brushing to add some depth and highlights to the details.

I tried using a bit of weathering pigment as well, but didn’t want to overdo it since I’m still quite inexperienced with them, so I applied it mainly on the tracks and wheels

Overall, I’m pretty happy with how it turned out! There’s still a lot for me to learn, though, so I’d love to hear your thoughts please!

Any tips, suggestions or constructive criticism are more than welcome, especially when it comes to weathering and working with pigments!
Thanks for taking a look! :)


r/modelmakers • • 19h ago

Critique Wanted Tamiya 1/32 Supermarine Spitfire MK.VIII

Thumbnail
imgur.com
14 Upvotes

Just completed this kit. First time using Micro Set and Micro Sol for the decals, 100% recommend. Beautiful kit to put together except the removable engine panels don't really fit properly and you cant really putty them. Won't be buying a kit with removable panels again even though its really cool.

Unfortunately I was a dumbass and accidentally threw out the clear plastic tree so its missing the lights on the wings, but I've already made my peace with it its all good XD


r/modelmakers • • 1d ago

Completed 2 in 1 UMa J-35 1/72

Thumbnail
gallery
98 Upvotes

Been looking for j-35 kit to come out since making the fc-31 a few years back. I was hesitant at first since it was a snap kit and the price was almost double the usual 1/72 (around 280hkd on tao bao). I was under the impression that you could either make the air or navy version off one body but it seems the kit was actually 2 full kits in the box that are quite different in assembly (and quality) from each other. Included are 3d cockpit panels and Carter and taxi print outs (see pic 1). The mold is pretty good quality but I found the navy version to be slightly better. While it's a snap fit I would advise putting the main body together once as it's a tight fit and it was quite difficult to separate again. Both are armed with the same 6 pl-15 which I'll add it in the comments later. My main criticism would be that it's (possibly) not accurate to the real thing in it's dimension and the surface details are too heavily inspired by the f-35 2 lighting (beside the irl allegation) and the J-20. Most reference photos show a more clean surface and imho the nose should be slightly longer but that could be from all the extra details. I might redo one later by removing panel lines. Overall it was a fun kit and an exercise in can you spot the difference.


r/modelmakers • • 1d ago

WIP Wall mount

Post image
74 Upvotes

Words probably cannot describe how afraid I am one of them is going to fall.