r/paint • • Oct 16 '20

OP Wants To Fight Why you can't judge a colour from a photo.

Post image
297 Upvotes

r/paint • • 1h ago

Advice Wanted advice for a newbie

• Upvotes

recently went out on my own after 7 years in painting for my previous employer, but not sure how to drum up new business. I dont want to burn my savings on Ads and lead gen, do I just go business to business and start shaking hands? I am insured and registered my LLC, any advice for a newbie? Really mainly trying to be a painting sub for a while


r/paint • • 4h ago

Advice Wanted Advice on refinishing this fireplace

Thumbnail
gallery
2 Upvotes

My parents are remodeling. They painted over a gas fireplace in their sunroom with white semigloss. They claimed to prime before they painted but it started peeling immediately. I have since peeled all the paint off since it looked terrible. My plan is now to restore the fireplace. Important note is the fireplace is made of particle board with a plasticy finish. Two questions.

1) what is the best method for removing the spots I couldn’t get? I was thinking paint thinner in a spray bottle.

2) could I restain the fireplace after all the paint is gone? Or use a clear coat. Something to help hide the scratches. I was concerned that if a paint peeled the clear coat would also peel. Thanks 🙏🏻


r/paint • • 5h ago

Failures Wall Stencil

Post image
2 Upvotes

Painted a wall that had a stencil painted on prior. I thought I sanded it down enough and primed it but its showing through when looking at extreme angles. Whats my best path forward now? Stencil is covering the entire wall. Thanks.


r/paint • • 10h ago

Advice Wanted What is the best method/product for filling nail holes in trim?

6 Upvotes

r/paint • • 11h ago

Advice Wanted Do I need to use separate primer?

Post image
4 Upvotes

Painting my powder room and the wife tested out this color but ended up not liking it. We’re going to go with a purple maroon color. The paint we’re using is Magnolia Home by Joanna Gaines Matte Tint Base Base 3 Paint and Primer Interior 1 gal do I need to purchase a separate primer to cover this green before we paint or will this cover the green by itself since it has a primer in it?

Thanks


r/paint • • 5h ago

Advice Wanted Any hope on correcting this brush?

1 Upvotes

Hi guys. Purdy clear cut here. I wanted to really take care of this bad boy, so I got some brush cleaner cuz I had some dried paint on there that wouldn't remove with soap and water. Direction for klean strip said to leave overnight if it was dried paint and it did. Now I'm using the brush and it keeps splitting down the middle into two bundles. I cleaned it again and then put it back in the package hoping it would dry in shape. Used it again today for trim, and nope, still splitting.

Do I have to buy a new purdy?

The purdy in question: https://imgur.com/a/rRsLDmM


r/paint • • 6h ago

Advice Wanted Preferred Paint Sprayer

1 Upvotes

What is the easiest and most reliable paint sprayer that you have found? Looking to use both indoors and out and with latex paints and limewashes. Thanks in advance! We currently have Ryobi and Dewalt tools available to us.


r/paint • • 8h ago

Advice Wanted Can I paint over this?

Thumbnail
gallery
1 Upvotes

This is the basement floor of the house I'm moving into. It is concrete with what I suspect is residue from asbestos tiles. The residue seems pretty hard and firmly attached. Could I reasonably paint over this without first removing the residue? I plan to eventually put flooring down but could I get away with painting over it in the meantime? I'm not looking for perfection, just a relatively reliable cover for the suspected asbestos.


r/paint • • 12h ago

Advice Wanted Best Cabinet Paint Roll on

2 Upvotes

What would be a good cabinet paint that is Satun I can roll on? Have read thru several comments and most reccomend the SW Urethane Trim paint. Seen several comments about Benjamin Moore as well possibly being too runny?

It is an entertainment center that doesn’t get a ton of direct sunlight so it doesn’t need to be perfect. I’m just hoping it’ll hold up to chipping and fingerprints over time.

Thank you for your help!

I’ll probably sand and prime with Bin prior.


r/paint • • 9h ago

Advice Wanted Sealing Fresh Dry Wall for Paint

1 Upvotes

I'm in the process of finishing my basement and the drywall has just been "finished" (mud, taped, sanded, textured). Ive never painted fresh dry wall, but Ive read conflicting things on what to do.

Can I get a PVA Drywall Primer like Kilz, apply then be ready for paint? Is there a better strategy or option to use?


r/paint • • 1d ago

Advice Wanted Many imperfections still visible on ceiling

Thumbnail
gallery
11 Upvotes

The guys who mudded my drywall assured me that the little raised areas of the mud and any scratches from sanding would be covered by the paint. After the first coat of primer, I can still see every single scratch and seam on the entire ceiling.

There’ll be one more coat of primer and two coats of paint coming. I have no idea whether to trust the process and assume it’ll all be covered, call the guy back to fix it, or just use textured paint to cover it all up (which I would rather not do, I originally wanted a smooth ceiling).

Any advice is appreciated.


r/paint • • 1d ago

Failures One more coat , maybe?

Post image
16 Upvotes

r/paint • • 21h ago

Advice Wanted Fresh paint peeled off with tape. How to fix?

Post image
0 Upvotes

I stupidly caulked a corner that had bad cracking from truss uplift. Primed the area. Hit the wall with 2 coats SW emerald. Used frog tape on the ceiling. All good until I had to remove the tape. Pulled off caulk which in turn took off a chunk of paint. Best way to fix? Should I sand the area before touching up with paint? Any tips/tricks? TIA


r/paint • • 1d ago

Advice Wanted Did I mess up? SW Emerald Urethane Trim Enamel Satin vs Semi-Gloss

4 Upvotes

Long-time DIY painter, first-time Sherwin-Williams user. Decided to upgrade my game from Behr.

I went with Emerald Urethane Trim Enamel for the trim and chose semi-gloss, since that's what I always get from other brands, not really thinking. Now I'm reading that SW Satin seems to be the more standard choice and is closer to other brands' semi-gloss, so I'm wondering if I should switch to Satin before I start?

The trim I'm painting is extremely old (house built in 1899), and while I'll do extensive restoration, priming, etc., before painting, the surface won't be perfect, and I don't want an extremely shiny, glossy sheen that will highlight imperfections. I always use matte paint on walls for the same reason.

I only bought a gallon, so cost isn't really a concern. I'd rather be happy with the finish than save the money.

Do I switch?


r/paint • • 1d ago

Discussion Any advice for painting outdoors in 40-60 degree weather?

0 Upvotes

I'm planning to paint my chain-link fence, but the weather is getting colder. Daytime highs will be around 57-60°F, while nighttime lows will drop to around 40°F.

I'm concerned about the paint curing properly once temperatures drop at night.

Would it help to cover the fence with a tarp after letting the paint dry for a few hours? Or would that trap moisture and cause problems?

What's the best way to paint in these conditions and make sure the paint cures properly?


r/paint • • 1d ago

Advice Wanted DIY new construction. Should I buy a sprayer or just suck it up and roll everything?

0 Upvotes

I'm building a 2400 sf house. The drywall finish guys are working right now, and I'm about to have to paint the entire interior. The ceilings are mostly 9', with a vault to 12' in the great room.

I've used airless sprayers before, but it's been a while. I can get a used one for about $300. But I'm also very good with a roller/paintbrush. Of course, all the drywall will have to be primed. Most of the house will have white ceilings, and the great room (about 600 sf) will also have white walls.

Should I spray this or just roll everything? Don't tell me to hire someone, I'm not that kind of person. :)


r/paint • • 1d ago

Advice Wanted Best paint and process for the flat surface that will be under a washer and dryer? My wife wants it the same color as the rest of the cabinets, but the machines are heavy, on small feet, and vibrate: I wonder what will hold up. Currently thinking Shellac Primer and SW Emerald Urethane; thoughts?

Thumbnail
imgur.com
1 Upvotes

r/paint • • 1d ago

Advice Wanted Farrow & Ball fail

Thumbnail
gallery
10 Upvotes

Choose to colour drench my south facing bedroom in Farrow & Balls Parma Gray (it'a more blue than gray) and after painting my entre room (ceiling and trim as well) I realized I hate how sweet baby blue it turned out. Some reference photos below of what I was going for and a photo of how it turned out.
I still have enough paint I could redo the whole room if I were to adjust it slightly. Can anyone help! I know orange will warm it up... but also add soem grey? Please help


r/paint • • 1d ago

Advice Wanted What product do you use to patch this?

Thumbnail
gallery
1 Upvotes

There is metal behind it and it seems like there is a 1/16 inch sort of hardened material.


r/paint • • 2d ago

Advice Wanted Paint smell after 6 months! Help!

Thumbnail
gallery
12 Upvotes

Hi! I moved into an apartment and it was painted right before I moved in. The main floor has cured except for the bathroom and there is a strong paint smell that hasn’t gone away for over 6 months - it permeates the whole main floor.

For context, the window was failing but it was replaced almost 2 months ago now. Note that this window does not open to the outdoors. I’ve been running the ceiling fan and an air filter 24/7, but the smell persists downstairs. It only seems to get better when I have a lot of windows and doors open. Now that we are approaching winter, it’s not feasible.

I’ve had two different painters come and take a look with my landlord. Both suggested painting again. One mentioned the wrong kind of paint was used initially. But both were surprised and so I’m nervous this won’t fix it.

So help needed!!! Do I repaint with the correct paint and then rent a proper ventilation fan? Has anyone ever had something like this occur? It’s driving us crazy. Thank you!!

EDIT: paint was brand new from sherwin Williams. Some is now stored outside and some is stored in our garage.


r/paint • • 1d ago

Advice Wanted Need some tips

2 Upvotes

Hello everyone!

I'm currently painting a mural on an office wall that includes a lot of circles, and I'm having some trouble getting clean, consistent edges. I've tried using painter's tape around the curves, but I haven't been able to achieve the smooth, even results I'm looking for. I also have a thin brush, but as you can see from the photo, my technique could definitely use some improvement!

I would appreciate any advice on the following:

  1. How do you tape circles evenly? I've been using small strips of painter's tape, but the process is time-consuming and it can be difficult to keep the curves smooth and consistent.
  2. Should I be using a specific type of brush? I'm wondering if there's a brush better suited for painting clean circular edges.
  3. What tips do you have for achieving smoother, more even brush strokes? Any techniques or best practices would be greatly appreciated.

Thank you in advance for your guidance and suggestions. I'm looking forward to learning from your experience!


r/paint • • 2d ago

Advice Wanted Festool is a game changer

Post image
11 Upvotes

r/paint • • 1d ago

Advice Wanted Home Depot paint help

Thumbnail
gallery
0 Upvotes

Paint help needed! 🎨 I grabbed a paint sample from Home Depot and fell in love with how it looked on my wall, and went back that same evening to buy a full gallon. The problem is, the gallon doesn’t match the sample at all! Has anyone else run into this? I really want the exact color from the sample—any tips on what went wrong or how to get Home Depot to fix it?


r/paint • • 1d ago

Advice Wanted Scuff x matte on plaster

1 Upvotes

I really wanted to do limewash in the stairwell of my Victorian house—I ripped down the old wallpaper last year and I love the texture of the bare plaster. A year of kids running up and down the stairs has given me second thoughts. I know scuff x is really durable but I wonder if any of the lovely texture will remain. Does anyone have experience with this paint on plaster?